|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$6.88||$6.74||$6.53||$6.25||Contact US|
15 Buttons 15CH High Power RF Wireless Remote Controller-White
- 15-Channel RF Wireless Remote Control Duplicator for Cars, Garage Doors , Gates doors, Alarm systems etc. Fixed frequency (433.92mhz or 315mhz) for copying 99.99% common fixed and learning code remote controls.
- Face to face copy the functions of your original remote by this 4-channel RF remote control duplicator with code learning functions and you'll always have a back up.
Duplicate Your Existing Remote Controllers:
- Vehicle central locking systems
- Garage doors
- Electronic gates
- Electrical appliances
- Car sunroofs
- Heating systems
- Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage.
Item: Wireless remote control
Brand: ZD CE FCC ROHS Certificate
Transfer: wireless Static current: 0uA Modulation: ASK
Working Voltage:DC12(V) Low power consumption
Working current:<8mA Power:≤10mw
Remote Distance:50-100m(receiver sensitivity-108dbm)
Working temperature: -50°C~+80°C
IC PT2262 EV1527 HCS301 HCS200 6p20b 2240 Fixed code/learning code, rolling code optional.
Package: paper bag
Performance Characteristics: Adopting high-quality chip control, stable & sensitive.
Transmitter with SAW resonator, stable frequency, less interference, far remote control distance, low power consumption.
Application: electric, motorcycle, automobile anti-theft alarm, home security products, short-distance wireless remote control products, industrial control products, remote control electric door, remote control curtains, remote control switches, security, central locking, remote control lift, traction machines.
- Works with the following remote control modules (please check your existing remote control before ordering): Your remotes also should be Fixed code or Learning code.
- 2260, 2262, FP527, HT12D , HT12E , PT2240, S026-1 ,S026-2 ,S026-3 ,S026-4, SMC918.... etc
Methods of operation:
1, Clear out code:
To Clear up test stored rf signal memory from factory by pressing the locking key and unlock the key at the same time, two seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. Indicates that the remote control codes stored has been cleared out.
2, Duplicating (learning)
Hands are holding remote control , and the other are holding the duplicating remote control, 2 remote controls put together as close as possible, while pressing the remote controls two match button,(eg: A-A’,B-B’) three seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that this copy of the remote control buttons are same as copied on the remote control button codes . Several other keys are also according to the above approach to learning.
3, Recovery code
If the code copied have been mistakenly removed the remote control, you do not worry, the remote control can restore yourself. Method is pressing (up-down eg: locking key and bell key) two buttons (metal shell remote control on the left, the plastic shell remote control on the right) at the same time ,3 seconds later, LED indicator light flashes three times, followed by a continuous fast blinking. This indicates that the original remote control codes have been restored.