57mm Air Cooling DC Spindle Motor ER16 110V 600W with Speed Governor for CNC Router Engraving Machine

57mm Air Cooling DC Spindle Motor ER16 110V 600W with Speed Governor for CNC Router Engraving Machine

Motor Specifications:  
- Spindle motor: DC Motor NMB bearing
- Working voltage: 24-110V DC
- Power: 600W
- No load speed: 2880-13200r/min
- Torque: 600mN.m
- Insulation resistance: >2 MOhm
- Dielectric strength: 400V
- Motor body diameter: 57mm, output shaft diameter: 9.525mm
- Collet: Blade position 37mm (including nut and filling 47mm)
- Collet: Diameter  20mm
- Motor length: 232mm (including the clamping part and motor)
- Spindle net weight: 1.8KG
- Radial runout: 0.01-0.03.
- Can be used for engraving metal or nonmetal materials.　　

Speed Governor Specifications:  
- Speed governor integrated power supply and controller
- Input power (VAC): AC90-260V 50/60Hz
- Output armature voltage range(VDC): 0-48/90/110/180/220
- Output armature current range (A): 8A
- Output excitation voltage range(VDC): 100/200 (Full Bridge Rectification)
- Output excitation current range (A): 1A
- Working frequency: 16KHz
- Given signal mode (V/mA): 0-5V,0-10V,4-20mA, PWM, key
- EN: On/ off
- Soft start: 0-10S
- Soft stop: 0-10S
- Double closed loop PI regulation
- IR torque compensation range: 0-100%
- Over current protection rrange: 0-set point (0 default)
- Over current protection: Display code E1
- Short circuit protection: Display code E0
- Over heating  protection: power tube temperature over 100degree C, display code E2
- Built in digital display module: Display working voltage and current
- Dimension: 140*98*38mm L*W*H
- Working environment: -10~40 degC
- Humidity: <85%

Speed Governor Features:
- Pulse width technique
- With short circuit , over current and over headting protection
- With soft start
- High and low voltage signal is fully isolated

Package list:
- 1 x DC Spindle Motor
- 1 x Speed Governor