AC 12V 4A ATMEGA328P Rapiro Robot Model Robotic Kit DIY Maker Electronic Humanoid Robot

AC 12V 4A ATMEGA328P Rapiro Robot Model Robotic Kit DIY Maker Electronic Humanoid Robot   

Description:
- Rapiro Kit Robot is a DIY model robot kit for hobby and education in sofeware engineering and robotics area. A cute, affordable, easy-to-assembled humanoid robot kit comes with 12 servos and servo control board (Arduino compatible). It’s designed for Raspberry Pi and its camera module. Looks small, acts large, all its limitless possibilities depend on how you program it.
- Rapiro is very easy to assemble! All you need to build Rapiro is two screwdrivers, and to follow the simple step-by-step instructions. Rapiro comes with a pre-programmed Rapiro board which works right after assembling.
- The Rapiro board is Arduino compatible and you can program it using the Arduino IDE. Your Rapiro could dance or sweep your desk if you program it to do so. Rapiro has countless possibilities for expansion! By mounting a Raspberry Pi and sensors (sold separately), you can customize your Rapiro anyway you want.
- Arduino is a combination of an 8-bit AVR based microcontroller board and C++ like development environment (Arduino IDE). The controller board works like an Arduino board, and it can be reprogrammed using Arduino IDE. Rapiro is not only for those who have programming skills but also for beginners.

Note: Raspberry Pi, Sensors, Battery and AC Adaptor are not included.

Specification:
- Size: 257mm X 196mm X 159mm(when assembled)
- NW: 1kg  
- PC Interface: USB
- Tools required for assembly Screwdrivers (#0, #1)
- Recommended Ages Kids (and big kids) aged 15 and upwards
- Assemble tools: screwdrivers(#0,#1)
- Five AA Ni-MH batteries(Works for 45 -90 minutes)
- AC adaptor (6V-12V, 4A and over, Plug: Outer diameter 5.5mm, Inner diameter 2.1mm, Center-positive, Barrel-negative)
- Processor: ATMEGA328P
- Eyes: LED and can change color

Packing List:
- 50 x Body parts (pieces)
- 12 x Servo motors (pieces)
- 50 x Screws (pieces)
- 2 x Cables (pieces)
- 2 x Pre-programmed Rapiro board (pieces)