| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $11.46 | $11.22 | $10.87 | $10.40 | Contact US |
Waveshare ESP32-S3 Development Board ESP32-S3R2 GEEK 1.14-inch LCD ST7789 for USB Dongle Support 2.4GHz WiFi BLE5
$17.68
M5Stack M5GO IoT Starter Kit V2.7 High Performance IoT Start Development Kit ESP32 2-inch IPS Screen for Arduino
$96.24
M5Stack Glass2 Unit 1.51-inch Transparent OLED Extended Screen Unit for SSD1309 Driver Solution
$34.22
Arduino 240W high-power H-Bridge Motor Driver Module smart car driver
Module Description
- SP configuration current limit
- the battery voltage (Vs) from 4.0V to 28V
- logic operating voltage (Vcc) of 4.5V to 5.5V
- All pins can withstand 19 V, Vs and output pins can withstand 40 V
- full turn-on resistance Ron from 100 milliohms (at Tj = -40 ° C)?? 300 mΩ (at Tj = 150 ° C)
- logic inputs are TTL and CMOS compatible
- Operating frequency up to 20kHz
- can be configured through the SPI interface or diagnostic
- overtemperature and short circuit protection function
- Vs undervoltage shutdown
- the Vcc undervoltage and overvoltage protection
- the Vcc overvoltage detection
- When detected in the open load whether to open
- When in the OFF state comprehensive diagnosis
- With the enable input pin
- Low standby current (<10μA)
![XIAOR GEEK TH Robot Car Kit for Raspberry Pi [Car + Starter Kit + 4B 4G Motherboard + A2 Robotic Arm]](https://www.thanksbuyer.com/image/cache/data/202208/77595/1660267639-1-200x200.jpg "XIAOR GEEK TH Robot Car Kit for Raspberry Pi [Car + Starter Kit + 4B 4G Motherboard + A2 Robotic Arm]")