| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $0.00 | $0.00 | $0.00 | $0.00 | Contact US |
QLeTEK KL500A 100V 500A Bluetooth Smart Battery Monitor Coulometer Voltmeter Voltage Current Meter
$59.85
QLeTEK KL300A 100V 300A Bluetooth Smart Battery Monitor Coulometer Voltmeter Voltage Current Meter
$49.96
QLeTEK KL150A 100V 150A Bluetooth Smart Battery Monitor Coulometer Voltmeter Voltage Current Meter
$43.95
Brand CEM LA-1011 2 in 1 RJ45 RJ11 LAN Tester Multimeter Cable Indentifier
Description:
- The tester is a newly designed and very practical tester that can easily read the correct pin configuration of 10 Base -T cable(Category 5), 10 Base-2 cable (coax), RJ45/RJ11 moduler cables, 356A, TIA-568A/568B and Token Ring cable by comparing one transmitting end to the corresponding receiving end. With the remote kit it can test cables installed far away either on wall plate or patch panel. It is easy to verify the cable continuity, open, short and cross-connect. It is affordable, so you can benefit the most.
Features:
1. Test the correct pin configuration of 10 Base-T 10 Base-2 Thin Ethernet cable, RJ45/RJ11 modular cables356A, TIA-568A/568B and Token Ring cable etc.
2. With remote kit it can remotely test cables up to 300 m away either on the wall plate or patch panel
3. Test the ground wire
4. Measures DC/AC Voltage, DC/AC Current, Resistance, Continuity & diode
Specifications:
|
Function |
Max Range |
Basic Accuracy |
|
Voltage DC |
600V |
±0.5% |
|
Voltage AC |
600V |
±1.2% |
|
Current DC |
200mA |
±1.5% |
|
Current AC |
200mA |
±2.0% |
|
Resistance |
20MΩ |
±0.8% |
|
Continuity Test |
Beep if less than 100Ω |
|
|
Size(HxWxD) |
162mm x 74.5mm x 44mm |
|
|
Weight |
308g |
|
