|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$38.44||$37.65||$36.47||$34.91||Contact US|
Car Audio Amplifier Board Mono Power Subwoofer High Power 12V 4Ohm
- The amplifier can support subwoofer speaker 10.0 inch or less than 12.0 inch
- Mono channel*200W rated power
- Output resistance:4~8ohm
- Frequency Response:30~280KHz
- Amplifier tube:2 pcs C5198+2pcs A1941
- Distortion degree:<0.5% full frequency/pure bass optional
- High density dual color ring streamline coil
- High-grade import capacitor
- Wonderful acoustic shocking experience
- Car audio,tone quality,technology
- Rated power:mono channel 175W
- Output resistance:4ohm
- Peak power:1x1000W
- Frequency response:30~280KHz
- The max output power:1000W
- Distortion degree:<0.5%
- 12V connect the car battery positive+,you must charge from battery.
- GND connect ground wire(If there is electricity,you can connect GND to battery negative-)
- REM(control wire) connect ACC wire for CD
- Treble to bass,If there is no bass audio jack,you need to buy a audio converter.
- Any vehicle CD,DVD card inserting device can use the subwoofer when subwoofer connects battery.
When you install amplifier,you need to be careful.
- If you connect 12V power,you must connect the battery positive+,or you will damage the car circuit.
- GND interface must connect the negative-(ground).
- There are three interface that connect the power cable.The middle interface is contyrol wire REM.You can connect +12V voltage to test the machine.Find the ACC control wire interce on the CD and connect wire.
When you are wiring,please not touch the groud and bandage the bare with electrical tape.Otherwise,it may cause short circuit and damage the machine.
Note:We have standard mounting box,you can contct us for price.
- 1 x Car Audio Amplifier Board