| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $44.76 | $43.84 | $42.47 | $40.65 | Contact US |
The Latest DDCS Version4.1 4 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDPMG
$329.72
The Latest DDCS Version4.1 3 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDMPG
$310.28
DDCS-V4.1 4-Axis Standalone Motion Controller Offline Controller Support 3 Axis/4Axis USB CNC Controller Interface
$296.11
CNC Engraving Machine Step Motor Control Drive Board 3.3A 16 Microsteps for 6 TVL Motor
Description:
- Working voltage DC 10V-40V. DC24V/10A power supply is recommended.
- For mach2/mach3 /emc/ /KCAM
- Output standard 3-axis drive, 4 axis and 5-axis expansion port and emergency stop port
- The control part and driving part of the high-speed optocoupler isolation. Prevent mutual interference
- The driver board with a large number of 74HC series chip amplifying and shaping of parallel signal, the output level of stable performance improvement
- The stepping motor is driven by the original TB6560 chip, DMOS internal double H bridge (FET).
- Rated maximum output: + -3.3A, low output impedance, the source 0.5 ohm, receiver port 0.4 ohm
- Suitable for less than 0.5-3A step motor 42,86, 57 two phase 5tvl or 6tvl/4 phase 5tvl or 6tvl , not for over 3A ones or 4 tvl /5 tvl motor
- Automatic current decay, lock motor, current regulation using potentiometer 0-3.3A no pole setting current.
- Subdivision: the whole step, half step, 1/4 step, 1/8 step, 1/16 step, the maximum 16 subdivision.
- Size: width 140* length 150* hight 30 (MM)
- Protection function, full protection drive, over current protection, overload protection, short circuit protection, fault phase protection, fault line protection, over heat protection, under voltage protection, reverse protection. (there is a protection indicator)
Package included:
- 1 x Step Motor Control Drive Board
