CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4
  • CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4
  • CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4
  • CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4
  • CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4
  • CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4
  • CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4
  • CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4

  • SKU:26545
    (0 reviews)   Write a review(Get Thanksbuyer Points!)
  • Availability: In Stock     Reward Points: 6
  • Price:$63.90
  • Price in reward points: 639
  • Buy more, save more
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $62.62 $61.34 $59.43 $56.87 Contact US

CNC Engraving Machine TB6560 3.5A 3-Axis Driver Board Control MACH2 MACH3 KCAM4

Features :
1. Inductive DC-DC step-down module, the computer end of the power isolation module design, just need one set of power input to run (not to take power in the computer USB end, simplified lines to reduce the interference source)
2. Increase the external signal input optical coupling isolation All optocoupler input, can be isolated from the the board internal voltage light lotus entirely external voltage input isolation signal, the input voltage of 5V-30V (greater than 5V external voltage needs series resistance, resistance can be selected depending on the voltage of the proximity switch use)
3. Increase the simulation 0-10V output, combined with the spindle control inverter MACH3 software speed regulation.
4. To add a set of relays to select the output (which can output two sets of relays, control two different devices, load isolation relay 1 P1 pin setting, relay 2 P16 pin setting)
5. Increase 15-pin multi-function interface, can be a variety of signal docking input control (directly handle or Ncstudio cards signal input)
6. The bottom of the plate axis joining full-bridge the freewheeling diode to ensure the long-term durability of the chip
7. Add signal buffer chip, and amplifies the external signals, increase the accuracy of the pulse
8. The oversized bottom of the E-type aluminum heat sink to ensure full load operation for 24 hours, the temperature is very low

Specification:
1. The the drive applicable software mach2, mach3, KCAM4 and so on
2. Stepper motor driver TB6560 new original chip
3. The maximum rated output: ± 3A, 40V, peak 3.5A, low output impedance source end of 0.5ω, the receiving end 0.4ω, low voltage
shutdown, thermal parking circuit and circulation protection
4. All three axes using a semi-flow design circuit,low drive heat also reduces motor heat, the drive and motor to achieve the longest life
5. TB6560 1 2 8 16 subdivision and decay mode can be set to the smooth running and low noise.
- Board DIM:158MM*100*38MM

Package list:
 - 1 * CNC Engraving Machine TB6560 3.5A 3-Axis Stepper Motor Driver Board

Related Products
What other people are saying

Write a review

Your Name:
Your Review:
Note: HTML is not translated!
Rating:
Bad    
Enter the code in the box below:

Copyright © 2012-2015 ThanksBuyer.com . All rights reserved.