Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
---|---|---|---|---|---|
Price /Unit | $57.90 | $56.72 | $54.94 | $52.58 | Contact US |
CNC Stepper Motor Driver 2 Phase Micro CNC Stepper Driver Controller 2M982 AC 7.8A 24-80V 200KHz
Description:
- 2M982 is a cost-effective high-perfomance bi-polar 2 phase micro-stepping drive, applying pure-sinusoidal current controltechnique. It is best suited for the applications that desired extreme low noise and heat,It operates well in an encironment, where electricity supply experience instability and fluctuation.
- Suitable for a wide range of stepping motors, from NEMA 23/34/42. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed and high precision.
Features:
- High performance, Cost-effective
- Supply voltage: 24~80V DC
- H-Bridge ,2 Phase Bi-polar Micro-stepping Drive
- Output current: 1.8~7.8A
- Speed self-adjustment technology
- Pure-sinusoidal current control technology
- Pulse input frequency: Max 200 KHz
- Optically isolated input and TTL compatible
- Automatic idle-current reduction
- 15 selectable resolutions, MAX 12,800 steps/rev
- PLS, DIR (CW/CCW) ,ENA mode
- Suitable for 2-phase, 4, 6 and 8 leads step motors. with NEMA size 23 to 34
- Current reduction by 50% automatically, when motor standstill mode is enabled
- Under voltage, Short voltage, overvoltage, overcurrent protections. Coil to Coil and Coil to Ground short dircuit protection.
Electrical Specifications:
Parameters | Min | Typical | Max | Unit |
Output current(A) | 1.3 | - | 7.8 | A |
Supply voltage(V) | 24 | 48 | 80 | VDC |
Pulse input frequency | - | - | 200 | KHZ |
Pulse Low Level Time | 2.5 | - | - | us |
Notice:
- when Vcc=5V, R=0;
- when Vcc=12V, R=1K, > 1/8W;
- when Vcc=24V, R=2K; > 1/8W.
Current Settings:
Peak Current | RMS Current | SW1 | SW2 | SW3 |
1.8A | 1.3A | 1 | 1 | 1 |
2.5A | 1.8A | 0 | 1 | 1 |
3.5A | 2.5A | 0 | 0 | 1 |
4.3A | 3.1A | 0 | 0 | 1 |
5.2A | 3.7A | 1 | 1 | 0 |
6.0A | 4.3A | 0 | 1 | 0 |
7.0A | 5.0A | 1 | 0 | 0 |
7.8A | 5.6A | 0 | 0 | 0 |
MicroStep Settings:
Steps per Revelution |
SW5 | SW6 | SW7 | SW8 |
200 | 0 | 0 | 0 | 0 |
400 | 1 | 0 | 0 | 0 |
500 | 0 | 1 | 0 | 0 |
800 | 1 | 1 | 0 | 0 |
1000 | 0 | 0 | 1 | 0 |
1250 | 1 | 0 | 1 | 0 |
1600 | 0 | 1 | 1 | 0 |
2000 | 1 | 1 | 1 | 0 |
2500 | 0 | 0 | 0 | 1 |
3200 | 1 | 0 | 0 | 1 |
4000 | 0 | 1 | 0 | 1 |
5000 | 1 | 1 | 0 | 1 |
6400 | 0 | 0 | 1 | 1 |
8000 | 1 | 0 | 1 | 1 |
10000 | 0 | 1 | 1 | 1 |
12800 | 1 | 1 | 1 | 1 |
(0FF=0.ON=1)
Package included:
- 1 x AC CNC Stepper Motor Driver