|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$5.63||$5.51||$5.34||$5.11||Contact US|
DC-DC 3.7V~34V Out Adjustable DC-DC Boost Circuit Module Inverter Booster Blue Board
DC In 3.7V~34VOut 3.7V~34V Wide voltage adjustable DC-DC boost circuit Higher voltage module Inverter Booster (blue plate)
The new upgraded version of the ultra-compact DC-DC step-up circuit step-up module adjustable boost board
- ultra-small size: 32x34x20mm.
- input (3.7V ~ 34V), output (3.7V ~ 34V) between any adjustments, the current in the same volume of DC-DC circuit, very few can achieve such a high voltage.
- Maximum input current 3A, 2A current recommended in the following, leaving a certain margin. Power up to 15W or so, up to about 90% efficiency.
- Use heavy gauge wire to connect the circuit. Clockwise decreases the voltage, the voltage increases counterclockwise.
- positive and negative input and output can not be reversed, the output is not short-circuit.
- The output voltage must be limited to 35V or less, otherwise it will damage the circuit.
- connect the input power, and then adjust the voltage to their needs. Finally, draw a line load!
- As the step-up DC-DC circuit, the input voltage is lower than the output voltage. In order to ensure stable output voltage.
- as close as possible the input and output voltage, input voltage * Input Current efficiency = output voltage * Output current. The closer the input and output voltage output current greater!
Note: This can not be used for notebook, laptop at least 60W of power.
Output voltage and current relationships: between different voltage and different load step; can output the maximum current is different; manager has been tested, listed a table.
- 1 pcs DC-DC boost module