DPS-6015A High Accuracy Programmable High-Power Power Supply Module Isolation 485 232 Communication

DPS-6015A High Accuracy Programmable High-Power Power Supply Module Isolation 485 232 Communication

Description:
DPS6015A is the single output programmable power supply. The input voltage is 15-80V output 0-60V, 0-15A, the current accuracy can reach 0.001A; intelligent temperature control fan cooling. The maximum output power is up to 900W, the output power is big with the small volume. DC-DC module design. Isolated 232 communication interface, isolated 485 communication interface, at the same time with TTL serial communication interface, serial communication protocol.

Features:
- Switching power supply technology based on BUCK architecture, the operating frequency is as high as 150KHz
- Wide DC input voltage range: DC15V ~ 80V, suitable for a variety of pre - level input power
- Operation buttons and multi - functional encoder, easy to use
- High accuracy and high resolution 10mV/10mA
- Low ripple and low noise
- Constant current CC, constant voltage CV and output ON indicator
- LCD1602 l liquid crystal display
- Can be used to adjust the knob and button, the voltage and current regulation
- Can measure the output voltage, output current, output power, output power (AH), working time, power device temperature
- Minimum differential pressure 2V can still work stably
- With output off function keys to open or close the output
- M0~M9 l set of 10 sets of parameters, it can be easily transferred out
- Board buzzer operation tips or alarm function
- Has isolated TTL serial communication, improved communication protocol for centralized control
- Specific isolated 485 communications port, suitable for industrial control
- Button calibration: the use of the process, if there is a key feature of the dislocation, you can press the OK button to start, pause 5-7 seconds after release, you can complete the key calibration

Parameters:
- Input voltage range: 15-80V
- Input voltage Regulation range； 0-60V
- Output current regulation range: 0-15A
- Output power: 0-900W
- Output voltage resolution: 10mV
- Output current resolution: 10mV
- Power supply effect: CV is less than 0.5%+10mV; CC is less than 1%+5mV
- Loading effect: CV is less than 0.5%+10mV; CC is less than 1%+5mV
- Output ripple: <20mVpp ( input 40V,output 12V,current8A)
- 100Hz Wave transmission ratio: <1/10000
- Typical efficiency: 88% ( input 40V,output 36V,current8A)
- Voltage/current accuracy: 10mV/ 10mA
- Voltage tolerance: -+1%+50mV
- Current tolerance: -+2%+10mA
- Response time: <50ms
- Storage operation: M0-M9
- Protection: OTP, OAP, OVP
- Cooling method: plate heat sink
- Operating Temperature: 0-40 degree C
- Storage temperature: -20~70 degree C
- Size: 140x100x43 (mm)
- Weight: 326g

Package Included:
- 1 x DPS-6015A High Accuracy Programmable High-Power Power Supply Module