|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$111.62||$109.34||$105.93||$101.37||Contact US|
DSLogic PLUS version Specifications:
- Buffer mode:
- Maximum sampling rate:
- stream mode:
- The max depth:16G@stream;256M@buffer
- Hardware storage:256M
- Trigger:Simple trigger+
- Sixteen level hardware trigger+
- Protocol trigger
- Threshold value:Fixed threshold:0-5v adjustable
- Voltage range:+-30V
- Input impedance:250K||7pF
- State sampling:the max 30M state sampling
- The max sampling rate:400MHz
- It can collect and observe digital signal within 100MHz.
- Overvoltage protection,electrostatic protection,long life
- Support double mode:stream mode,USB real-time transmission to PC,ultra large sampling depth;buffer mode,wide bandwidth hardware storage,ultra high sampling rate
- Adjustable threshold value:support various voltage:1.2V/1.8V/2.5V/3.3V/5.0V
- All metal shell
- 360 degree noise shielding,quick heat dissipation,circuit operation is more stable.
- USB tYPE-C interface
- The max support 16G depth
- 100M sampling rate can collect 160 seconds wave form
- 20M sampling rate can collect 13minutes wave form
- 1M sampling rate can collect 4 hours wave form
- Window system(xp/vista/win7/win8/win10)
- Multilayer protocol,date is more intuitive
- Support Protocol content triggering
DSLogic different from the logic analyzer features other entry level are mainly the following aspects:
- 256Mbit onboard memory to ensure that real-time sampling data up to 1.6Gbps storage. Entry-level logic analyzer Metropolitan bandwidth or memory depth indicators compromise, while greatly reducing the usefulness of such a logic analyzer. For example, real-time transmission through saleae USB memory to store data utilizing the host computer, a good solution to the problem of memory depth, but because of USB bandwidth is limited, can only reach 200-300Mbps sampling bandwidth; Open Workbench Logic Sniffer is used the internal FPGA BRAM as storage space, also has a sampling 1.6Gbps bandwidth, but the memory depth is only 216Kbit.
- 16 Stage Combined advanced triggering functions, easy to set complex trigger conditions. As a logic analyzer trigger the most important characteristics of a direct impact on the accuracy of the sampling location. Most entry-level logic analyzers do not have the advanced triggering functions, allowing users to find and locate the problem in a lot of useless information, wasting valuable time.
- Continuously adjustable threshold level. Based on the level of high-speed comparator sampling circuit, not only can adjust the level of the threshold level to accommodate different signal standards (1.2V / 1.5V / 1.8V / 3.3V / 5.0V), and can determine the level of accuracy to the level of less than 100mV for maximum noise margin, greatly reduces the possibility of false positives and sampling burrs. Most entry-level logic analyzer using a standard interface chip fixed voltage level judgment, can not guarantee the accuracy of the sampling results.
- Use shielded cable fly line connector. Shielded cable is standard on high-end logic analyzer, you can ensure the integrity of the sampled signal circuits, reducing the extent of the sampled signal distortion. Most entry-level logic analyzer using ordinary DuPont cable to connect the logic analyzer and the measured signal, impedance discontinuities and ground bounce problems make a serious distortion of the signal, which affects the logic analyzer on the measured signal level judgment.
Our PC software uses the same open-source architecture, now support up to 44 kinds of protocol analysis capabilities. Under the support of the open source community, this number will continue to grow. Everyone thought that this free protocol parsing library to make their own contribution.
- 1 x DSLogic Main unit
- 1 x Type-c USB
- 5 x Winding displacement (Teflon Silver plated wire)
- 16 x Signal clips (Color random)