FriendlyARM Samsung S3C6410 ARM11 Mini Board+ 4.3" Touch LCD Screen

FriendlyARM 6410 SBC (Single-Board Computer) with 533 MHz Samsung S3C6410 ARM11 processor. The board measures 18 cm x 13 cm, ideal for learning about ARM systems.

Specification
- Dimension: 180 x 130 mm
- CPU: 533 MHz Samsung S3C6410A ARM1176JZF-S (max freq. 667 Mhz), OpenGL ES 1.1&2.0 supported
- RAM:256 MB DDR RAM, 32 bit Bus
- Flash: 256 MB SLC NAND Flash
- EEPROM: AT24C08 (256 Byte, via I2C)
- Ext. Memory: SD-Card socket
- Serial Ports: 4x DB9 connector (RS232); 4x TTL port connectors
- IR: Infrared Receiver
- USB: 1x USB-A Host, 1x miniUSB Slave OTG 2.0
- Audio Output: 3.5 mm stereo jack
- Audio Input: 3.5 mm stereo jack, Condenser microphone
- Ethernet: RJ-45 10/100M
- LEDs: 4x User LEDs
- RTC: Real Time Clock with battery
- Beeper: PWM buzzer
- Camera: 20 pin Camera interface (2.0 mm)
- TV Output: 1x RCA
- SDIO2: used for SD WiFi modul
- Temperature sensor: DS18B20 (via I2C)
- ADC Potentiometer: 1x
- LCD Interface

• STN Displays:

  • Monochrome, 4 gray levels, 16 gray levels, 256 colors, 4096 colors

  • Max: 1024x768

• TFT Displays:

  • Monochrome, 4 gray levels, 16 gray levels, 256 colors, 64k colors, true color

  • Max: 1024x768

• 40 pin (2.0 mm) and 41 pin connector for FriendlyARM Displays (4.3" and 7")

- Touch Panel: 4 wire resistive
- User Inputs: 8x push buttons
- User Outputs: 4x LEDs
- Expansion: 40 pin System Bus, 30 pin GPIO, 20 pin SDIO (SD, SPI, I2C), 10 pin Buttons (2.0 mm)
- Debug: 10 pin JTAG (2.0 mm)
- Power: 5V connector, power switch and LED
- Power Supply: regulated 5V DC
- OS Support

• Android 2.3

• Windows CE.NET 6.0 (R3)

• Linux 2.6.36 + Qtopia-2.2.0 + Qtopia4-Phone + QtE-4.7.0

• Ubuntu (Xubuntu)

Bootloader:
- U-boot-1.6.1(with source code)
- Superboot

Supported File System:
- Yaffs2
- UBIFS
- cramfs
- Ext2/3
- Fat32
- NFS

Driver:
- RS232 (with source code)
- DM9000 (with source code)
- WM9714 (with source code)
- RTC (with source code)
- 4x LED (with source code)
- USB Host (with source code)
- LCD Driver (3.5“, 4.3“, 7“, 8“, LCD2VGA 1024x768, LCD2VGA800x600, LCD2VGA640x480, EZVGA800x600 etc) (with source code)
- 4 wire touch screen panel (with source code)
- 1 wire touch screen panel (with source code)
- USB camera (with source code)
- USB 3G (with source code)
- SD WiFi (with source code)
- SD/SDHC (with source code)
- I2C-EEPROM (with source code)
- LCD back light (with source code)
- Watchdog (with source code)
- Multimedia (Jpeg, fimc, MFC, 2D/3D Accelerator, TVENC, TVSCALER, CMOS Camera etc.)
- SPI (with source code)
- ADC (with source code)