• Hifei KingKong Series 2-3S 20A Electric Speed Control with Data Logger ESC-20A-K
  • Hifei KingKong Series 2-3S 20A Electric Speed Control with Data Logger ESC-20A-K
  • Hifei KingKong Series 2-3S 20A Electric Speed Control with Data Logger ESC-20A-K

Hifei KingKong Series 2-3S 20A Electric Speed Control with Data Logger ESC-20A-K

Availability: Out Of Stock

  • Price:$36.89
  • Price in reward points: 369 Reward Points: 4
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $36.15 $35.41 $34.31 $32.83 Contact US
Quantity:

Hifei KingKong Series 2-3S 20A Electric Speed Control with Data Logger ESC-20A-K
Features:

- Microprocessor controlled
- Integrated the function of flying data logger, could recording the flying data as:
- Current
- Voltage
- Temperature
- RPM
- Power
- Throttle travel

- Programmable the parameters of ESC through USB cable connected to computer
-  Upgradeable the firmware of ESC through Internet
-  20A continous(30A surge)
-  Up to 10 cells NiMH/NiCad or 2~3cell Lithium-polymer
-  High rate adjustable switching (PWM:8KHz/12KHz/16KHz)
-  BEC:2A (Linear BEC)
-  Support 3 micro servos
-  Programmable low voltage cutoff
-  Programmable cutoff types(soft cutoff/hard cutoff)
-  Programmable brake type(disable/soft brake/hard brake)
-  Time advance programmable (low/standard/high)
-  Programmable current limiting(very sensitive/standard/insensitive/disable)
-  Governor mode(low rpm governor/high rpm governor)
-  Programmable startup type(very soft start/soft start/fast start)
- Thermal Protection(100 centigrade)
-  Apply to most of inrunner and outrunner brushless motors.
-  No complex programming, auto adapt work mode.
-  A LED (flashes) indicates full throttle.
-  Runs motor in forward or reverse by swapping any two motor wire connections.
-  Safe “power on” arming program ensures motor will not accidentally turn on.
-  Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.
- The ESC is disabled when the voltage is over 15v at power-on

Specfications:

- Type: ESC-20A-K
- Size: 52mm X 26mm X 10mm
- Weight: 23g
- Constant Current:20A (30A burst)
- BEC: Yes, 2A
- Input: 2 to 3 Li-Po, or 4 to 10 Ni-MH/Ni-Cd
- Data logging function: YES
- Programing methods: Program card/Program box/USB Linker capable (not included)


Down load:

- Setting up       -user manual

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha