Mastech H787 Current Process Calibrator Multimeter True RMS

- DMM and loop calibrator in one tool

- Clear LCD with backlight; 4,000 counts (30,000 counts for dc current)

- Ni – MH rechargeable batteries

- 1000V overload protection on V, ohms, frequency.

- 25% Manual Step plus Auto Step and Auto Ramp on mA output.

- Huayi combined the DMM you trust with the loop calibrator you need. The H787 ProcessMeter puts a complete troubleshooting solution in the palm of your hand. Get in touch with more information, faster and easier with the newest member. The H787 gives you the measurement capabilities you expect from our rugged, reliable DMMs plus the ability to source, simulate, or measure dc current with 1 microamp resolution and accuracy of 0.05%. Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you're tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get the single best solution for doubling your power. The H787 ProcessMeter from Huayi

- Precision 1000V, 400 mA digital multimeter

- Measure ac and dc volts, ac and dc current, resistance, continuity, and frequency

- 0.1% dc voltage accuracy

- 0.05% dc current accuracy, 1 ‘A resolution to 30 mA

- Simultaneous mA and % of scale readout

- True rms ac voltage measurement to 1 kHz

- Frequency measurement to 20 kHz

- Min/Max/Average/TouchHold/Relative modes

- Diode test and continuity beeper

- DC current source/loop calibrator

- 20 mA current source/simulator

- Simultaneous mA and % of scale readout

- Manual step (25%, coarse, fine) plus auto step and auto ramp
Specifications:

Specifications