MINI STM32F429IG Development Board for 4.3 inch Touch Screen Arduino SDRAM NAND RGB Dual USB Network

MINI STM32F429IG Development Board for 4.3 inch Touch Screen Arduino SDRAM NAND RGB Dual USB Network

Description:
- MINI STM32F429IG development board can be accessed by 4.3-inch, 7-inch,10.1-inch, 12.1-inch LCD screen.
- Add 13 external modules18 examples
(BMP180,BH1750FVI,L3GD20,L3G4200D,HMC5883L,MPU-6050,DS18B20,AM2301,HC-SR04,SSD1306,ILI9341,MFRC522,NRF24L01)
- Added 12 emWin example and emWin learning of notes 136, PNG icons and background image can be converted into a stream bitmap file (* .dta) saved on the SD card, after the code runs * .dta first load to the SDRAM needs used when it is displayed on the LCD screen.
- Examples of the five second way to increase USB devices from example, from a two-way USB devices simultaneously.
- The second path to increase seven USB master example, an example of a two-way simultaneous use USB master.
120 examples of the use of the package to STM32Cube updated to V1.3 version.
- The core board size: 67.3*47.1mm
- Added 51*STM32CubeSoftware Development Kit underlying peripheral drivers examples.

Parameters:
Core:
- ARM 32-bit Cortex™-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

Memories
- Up to 2 MB of Flash memory organized into two banks allowing read-while-write
- Up to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAM
- Flexible external memory controller with up to 32-bit data bus: SRAM,PSRAM,SDRAM, Compact Flash/NOR/NAND memories

LCD parallel interface
- 8080/6800 modes

LCD-TFT
controller up to SVGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)

Clock, reset and supply management
- 1.8 V to 3.6 V application supply and I/Os
- POR, PDR, PVD and BOR
- 4-to-26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC (1% accuracy)
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Sleep, Stop and Standby modes
- VBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

3×12-bit, 2.4 MSPS ADC:
- up to 24 channels and 7.2 MSPS in triple interleaved mode
- 2×12-bit D/A converters
- General-purpose DMA:
- 16-stream DMA controller with FIFOs and burst support

Up to 17 timers:
up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

Debug mode
- Serial wire debug (SWD)& JTAG interfaces
- Cortex-M4 Embedded Trace Macrocell™

Up to 168 I/O ports with interrupt capability
- Up to 164 fast I/Os up to 90 MHz
- Up to 166 5 V-tolerant I/Os

Up to 21 communication interfaces
- Up to 3 × I2C interfaces (SMBus/PMBus)
- Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)
- Up to 6 SPIs (45 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock
- 1 x SAI (serial audio interface)
- 2 × CAN (2.0B Active) and SDIO interface

Advanced connectivity
- USB 2.0 full-speed device/host/OTG controller with on-chip PHY
- USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
- 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

8- to 14-bit parallel camera interface up to 54 MBs/s
- Cryptographic acceleration: hardware acceleration for AES 128, 192, 256, Triple DES, HASH (MD5, SHA-1, SHA-2), and HMAC(Only STM32F439)
- True random number generator
- CRC calculation unit
- 96-bit unique ID
- RTC: subsecond accuracy, hardware calendar

Package included:
- 1 x Development Board