New Hot MHS2300A Dual Channel Digital DDS Signal Generator 0-5MHZ 20Vp-p

New Hot MHS2300A Dual Channel Digital DDS Signal Generator 0-5MHZ 20Vp-p

Features:
- DDS technology, FPGA design, low consumption
- Aluminum shell design, portable, power supply by single DC 5V power adapter
- 2.4inch TFT LCD screen
- Completely symmetry channels, could work in synchronous
- Could realize multi machines synchronous by TTL-IO port
- With sine wave, triangular wave, square wave, STW, pulse wave which duty ratio adjustable
- With 15 set user defined wave storage function, depth 1024*10bits
- Below 15Mhz, range up to 20Vp-p, if over 15Mhz, up to 15Vp-p
- Wave frequency resolution minimum 10uHz, range resolution minimum 10mV
- With -100%~+100% DC offset function
- Setting +100%, could change output as digital signal, and realize 0~10V any CMOS level
- Pulse wave duty ratio adjustment precision to 0.1%
- Under burst function, could control output 1~1048575 pulse
- With any start/terminal point frequency scan, range scan, duty ratio scan function
- With frequency measure, circules measure, positive/nagetive pulse wide measure, duty ratio
- measure and count function
- Completely open communication
- PC could control the machine, and editing any wave

Wave features:
- Waveforms: sine, square, triangle, pulse, TTLWave, any wave(15 waves)
- Sine wave distortion: 0.8% (20Hz ~200KHz)
- Square wave rise and fall times :<20ns

Frequency Characteristics:
- Sine wave frequency range : 10mHz~ 20MHz
- Resolution: 10uHz
- Frequency error: +/-5 × 10-6
- Frequency stability: +/-1× 10-6

Amplitude characteristics:
- Output impedance: 50ohm+/- 10%
- Amplitude range : 10mVp-p~20Vp-p(10mHz~15mHz)
- Amplitude resolution:10mVpp
- Amplitude Stability: +/-0.5%( Per5H )
- Amplitude errors: +/-1%+10mV) ( Frequency1KHz,20Vp-p)

The duty cycle of the square wave:
- Range: 0.1% to +99.9 %
- Resolution: 0.1%

Phase characteristics:
Range: 0 ~ 359deg
Resolution: 1deg

Sweep features:
Sweep range: 10mHz~ 20MHz
Scan time:1S~ 99S
Scanning mode: linear sweep , logarithmic sweep

Frequency/Counter technical indicators :
- Frequency Range: 1Hz~ 60MHz(H.F)
- The minimum input voltage: 0.5Vp-p
- The maximum allowable input voltage: 20 Vp-p
- Count: Manual

Package Includes:
- 1* Dual Channel Digital DDS Signal Generator