• Port107V STM32F107VCT6 STM32F107 STM32 ARM SCM Development Board
  • Port107V STM32F107VCT6 STM32F107 STM32 ARM SCM Development Board
  • Port107V STM32F107VCT6 STM32F107 STM32 ARM SCM Development Board
  • Port107V STM32F107VCT6 STM32F107 STM32 ARM SCM Development Board
  • Port107V STM32F107VCT6 STM32F107 STM32 ARM SCM Development Board

Port107V STM32F107VCT6 STM32F107 STM32 ARM SCM Development Board

Availability: Out Of Stock

  • Price:$26.23
  • Price in reward points: 262 Reward Points: 3
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $25.71 $25.18 $24.39 $23.34 Contact US
Quantity:

Port107V STM32F107VCT6 STM32F107 STM32 ARM SCM Development Board
Description:
- Color: Blue
- Material: PCB
- Port107V is a STM32 development board that features a STM32F107VCT6 device as the microcontroller
- Supports further expansion with various optional accessory boards for your specific application
- Ideal for starting application development with STM32F family
- STM32F107VCT6:
- Core: Cortex-M3 32-bit RISC
- Operating Frequency: 72MHz, 1.25 DMIPS/MHz
- Operating Voltage: 2-3.6V
- Package: LQFP100
- I/Os: 80
- Memories: 256K Flash, 64K RAM
- MCU communication Interfaces:
- 3 x SPI, 3 x USART, 2 x UART, 2 x I2S, 2 x I2C, 1 x Ethernet MAC, 1 x USB OTG, 2 x CAN
- AD & DA converters: 2 x AD (12-bit, 1¦Ìs, shares 16 channels); 2 x DA (12-bit)
- Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP
- 2. AMS1117-3.3V: 3.3V voltage regulator;
- 3. Power indicator;
- 4. LEDs: Convenient for indicating I/O status or program debugging running state;
- 5. Reset button;
- 6. User keys;
- 7. Joystick: five positions;
- 8. 25M crystal oscillator;
- 9. 32.768K crystal, used for internal RTC, also supports clock calibration.
- 10. JTAG/SWD interface: for debugging/programming;
- 11. USB connector, used for establishing USB communication between PC and the STM32 development board;
- 12. USART2 connector, supports ISP (In-System Programming) through USART2, as well as system signal output
- 13. IO expander, all the MCU pins are accessible on expansion connectors for further expansion;
- 14. Power input/output header, 5V/3.3V, usually used for power output, or common ground with other user board;
- 15. 5V DC power jack;
- 16. Boot mode selection: for configuring the BOOT0 and BOOT1 pins;
- 17. Power supply switch, powered from 5V DC jack or USB connection
- 18. OTG PWR OUT enable jumper
- Short circuit the jumper to enable OTG PWR OUT
- Disconnect the jumper to disable, as well as taking up no I/O port
- 19. OTG VBUS enable jumper
- Short circuit the jumper to enable OTG VBUS
- Disconnect the jumper to disable, as well as taking up no I/O port
- 20. VBAT selection jumper
- Short circuit the jumper to use system power supply;
- Disconnect the jumper to connect the VBAT to external power, such as battery
- 21. VREF jumper
- Short circuit the jumper to connect VREF+/VREF- respectively to VCC/GND
- Disconnect the jumper to connect VREF+/VREF- to other custom pins via jumper wires
- 22. User LEDs jumper
- Short circuit the jumper to connect to I/Os that used in example code
- Disconnect the jumper to connect to other custom pins via jumper wires
- 23. User keys jumper
- Short circuit the jumper to connect to I/Os that used in example code
- Disconnect the jumper to connect to other custom pins via jumper wires
- 24. Joystick jumper
- Short circuit the jumper to connect to I/Os that used in example code
- Disconnect the jumper to connect to other custom pins via jumper wires
- Packing list:
- 1 x Port107V development board
- 1 x USB type A to Mini-B cable (92cm)
- 1 x USB power cable (98cm)
- 2 x 4-pin wire
- 2 x 2-pin wire
- 1 x User guide CD

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha