Car Fuel Economizer Saver Oil Saving Device Gapoony Ignition Efficiency Improved

Car Fuel Economizer Saver Oil Saving Device Gapoony Ignition Efficiency Improved

Product Description:
- Automobile ignition improve,safe,realiable.
- Typical problems:cars often stall.Car ineffective acceleration.
- Lift power,fuel saving,decrease emission.
- The car fuel economizer uses the latest racing technology.Voltage-boosting and current compensation type 2 in 1 ignition method.Ignition strength improves 1.5%-2.5%.It can be fully ignited under various combustion conditions of engine cylinders,the low temperature start-up becomes smooth,complete combustion.The torque can improves 5%-15%.After testing,the horsepower can improve 15%.Oil saving can reach 5%.
- It uses the latest digital signal processor controlled high technology ignition system intensifier.Fuel economizer provides stable voltage and reliable current for car ignition system.It can improve torque,energy-saving and emission-reduction.
- If the fuel economizer is damaged,the car will automatically change into original car power supply.This will not affect car driving.
 
Features:
- Waterproof anti-shock,good heat radiation,endurable.     
- Output stable voltage,100% improve ignition strength.  
- No-interference signal for cars
- Over-load protection function
 
Specification:
- Name:Car Fuel Economizer      
- Mode:JY-165B
- Product attributes:Ignition coil high-pressure & Ignition coil constant current 2 in 1 power enhanced version   
- Application:all cars
- Dimension:74 X 74X32mm

Note:It is only for gasoline cars,natural gas cars,coal gas cars and liquefied gas cars,suitable for all modules.

Functions:
- Improve engine ignition efficiency,oil-saving.
- Lift horsepower and torque,can improve old new car 5P power
- Quick and smooth acceleration response (engine motor output continously output)
- Strong climbing force
- Improve combustion efficiency (decrease carbon deposition and exhaust emission.)
- The head lamp will get brighter at night.
- Extend battery life

Instructions:
The product is suitable for all modes within four cylinder.
Please choose install method based on engine ignition coil quantity.
1.Find the position for high-voltage ignition coil of the original car.
Pull off all ignition-coil plugs and adjust the multimeter to DC gear.The assistant starts up the car in the car,meanwhile technician detects the high-voltage ignition coil 12V power cable with multimeter.
2.Find 12 V power cable and cut off it.Peel the insulation layer 1 cm,then connecting cables according to the installation diagram.The ignition coil 12 V power current passes black-leading cable and goes to ignition intensifier.Then it spills into ignition coil through red cable.The joint must be realiable and wrapped with tape.
3.When the cable connecting is done,plug all the plugs and make sure they are safe.Make the ignition intensifier. far from the engine and install fasten it.It can extend usage life and prevent engine shock damage and high-temperature damage to ignition intensifier.

Package List:
- 1x Car Fuel Economizer