• PICO-BOX Z2-ATX-200 200W High Power 24pin Mini-ITX DC ATX Direct Plug-In Power Supply
  • PICO-BOX Z2-ATX-200 200W High Power 24pin Mini-ITX DC ATX Direct Plug-In Power Supply

PICO-BOX Z2-ATX-200 200W High Power 24pin Mini-ITX DC ATX Direct Plug-In Power Supply

Tags: Power Supply

Availability: In stock, usually dispatched in 1 business day

  • Price:$27.06
  • Price in reward points: 271 Reward Points: 3
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $26.52 $25.98 $25.17 $24.08 Contact US
Quantity:

PICO-BOX Z2-ATX-200 200W High Power 24pin Mini-ITX DC ATX Direct Plug-In Power Supply

Product Description:
- Z2-ATX-200: use the dc 12V as the output, the new design for high power devices (Gordon is available in Hong Kong), the peak power of 200W, adopting microcontroller (MCU, the MCU) adjust the ATX sequence, compatibility is stronger,is suitable for SuoTai,msi,asus,Magic - Pro,ASROCK brands such as ITX motherboard and some Micro ATX motherboard.
- 12VDC,O noise,plug 200W power supply module.
- Mini power module 24pin ATX-200W high power PicoPSU ITX HTPC
- Z2-ATX-200, 200w output, 12v input  DC Power Supply

Note:Updated Z2-ATX,whistler can not occure.compatible 99% mainboard.You can not use market IBM 12V 12.5A adapter,because its load can only reach 9A.

http://www.chiphell.com/forum.php?mod=viewthread&tid=502991&page=1#pid13086652

Technical parameters:

- The input voltage:DC 12V
- Product model: Z2-ATX-200    
- Interface specifications:24 pin ATX socket standard
- Conversion efficiency:92%    
- Peak rated output power:160 w,peak:220W, over 160W will plus heat    
- Overload protection:over voltage protection
- The working skill:zedoary 4 layer PCB + eight zones reflow soldering, wave soldering    
- Output voltage:5 groups, as shown in table 1    
- Output: ATX 24PIN with +12V, +5V, +3.3V, and -5VSB, max 200 Watts
- Dimension: 56mm (L) x 38mm (H) x 10mm (W)

Interface definition: input/output interface definition see the appended drawings.    
Product size as shown in the figure below, adopts the high quality of Taiwan 24 pin ATX connectors, PCB overall height has been reduced to 38 mm, which is suitable for the small size more small case.    

Input DC connector diameter 5.5 mm, inner diameter of 2.5 mm.    
Each DC - ATX product lines to match the input DC and output interface. Input DC line is about 34 cm, line output interface includes two SATA power connectors, a CPU/GPU power connectors, a PATA power supply interface, power supply interface and a CD ROM.

Input Requirements (Vin):

    Vin=12V regulated, min=1A, max=24A (load dependent).
    Over-voltage shutdown will occur at about Vin ≥ 13.8V.

Over-Load Protection:
    Over-load protection will be triggered when either of the +5V or +3.3V rail exceeds 150% Max load.
    No over-load protection on +12V rail because the +12V rail is connected directly to the power source input.

Turn On Delay:
    At least 20 ms is needed for the raise of +5VSB rail to reach its peak, after turning on.
    Voltage raise is measured from 5% to 95% of peak.

Remote ON/OFF Control (NPSON or PS_ON):
    If logic level on NPSON pin is LOW, output voltage of PSU is enabled.
    If logic level on NPSON pin is HIGH, output voltage of PSU is disabled.

Power Good Indicator (PG or PWR_OK):
    Power good delay is fixed to 300 ms. Delay can be programmed according to customer requirements.
    If logic level on PG pin is HIGH, output voltage of PSU is ready.
    If logic level on PG pin is LOW, output voltage of PSU is invalid ( Vin≤10.5V or Vin≥13.8V, or other fault conditions).

Power Ratings:
    At maximum load, forced air ventilation is required.
    Peak load should not exceed 60 seconds.
    Combined maximum power output should not exceed 200 Watts.
    For fanless or improper ventilation operation, de-rate the output of +5V and +3.3V rails by about 20%.

Package included:(not included AC adapter)
- 1x Z2-ATX-200 24pin DC-ATX Power Supply
- 1 x 4Pin AUX.(12V)
- 2 x SATA Power
- 1 x DC-in Jack (2.5/5.5mm Cable length:34cm)

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha