• Proxmark3 Easy V3.0 DEV Kits RFID ID M1 IC Card Reader Nfc integrated Antenna
  • Proxmark3 Easy V3.0 DEV Kits RFID ID M1 IC Card Reader Nfc integrated Antenna
  • Proxmark3 Easy V3.0 DEV Kits RFID ID M1 IC Card Reader Nfc integrated Antenna
  • Proxmark3 Easy V3.0 DEV Kits RFID ID M1 IC Card Reader Nfc integrated Antenna
  • Proxmark3 Easy V3.0 DEV Kits RFID ID M1 IC Card Reader Nfc integrated Antenna

Proxmark3 Easy V3.0 DEV Kits RFID ID M1 IC Card Reader Nfc integrated Antenna

Tags: Proxmark3 Easy

Availability: In stock, usually dispatched in 1 business day

  • Price:$106.79
  • Price in reward points: 1068 Reward Points: 11
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $104.65 $102.52 $99.31 $95.04 Contact US
Quantity:

Proxmark3 Easy V3.0 DEV Kits RFID ID M1 IC Card Reader Nfc integrated Antenna

Compared with PM3 RD V2.0 Improvement:
- Built-in high-frequency antenna, antenna depth matching, eliminate blind spots, read the whole card data flowing without interruption.
- Increase Parse the secret key rate , the size of the card takes all.
- Sniffing data, complete stable, low error rate.
- The low frequency antenna to improve the signal to noise ratio, the higher the recognition rate, detachable design to meet various needs.
- No antenna interface, did not need have to plug because it is easy to damaged.
- Cancel the lithium battery, simple and convenient. (Offline can use mobile power supply)
- In addition to the original relay and other unrelated, low cost, lightweight and portable.

The mainboard:

After it is installed, put on the enclosure cover

Put on the IC card

Install the low-frequency(LF) antenna

Use the frequency and you can dismantle anytime you want
 
Protective film can protect the circuit board from being scratched


Product Description:
- V3.0 is the new version.Compatible with all official firmware, according to your need to brush any version.
According to your preference, you can use the official "Command Line" or "Proxmark Tool.exe" to operate.
- (Low frequency antenna installed on the right side)
# LF antenna: 29.84 V @ 125.00 kHz
# LF antenna: 32.31V @ 134.00 kHz
# HF antenna: 28.43V @ 13.56 MHz
(Low frequency antenna installed on the left side)
# LF antenna: 43.86 V @ 125.00 kHz
# LF antenna: 24.48 V @ 134.00 kHz
# HF antenna: 25.13 V @ 13.56 MHz
- Operating voltage: 3.5-5.5V
- Current job: 50-130mA
- Length and width dimensions: 54mm * 86.6mm
- The thickness: 6.2mm (thinnest) 9.8mm (plus screw) 15.8 (plus low frequency antenna)
- The main function (common):high frequency; Operating card mode:Conventional M1 S50 card reader and other 14443A Class B card; Use the PRNG vulnerability parsing sector 0.;Use nested (mfoc) vulnerability resolve the whole card.
- Analog card mode:Analog Mifare series S50 / Ultralight / DESFire card UID; Analog M1 S50 whole sector data. (Pick a card reader) ;Analog M1 S50 shell, to obtain data to calculate the secret key (pick a card reader)
- Silent mode: Silent sniffer data communication between the M1 S50 card and card reader, analytical secret key; Silent sniffing 14443A Class B card reader with a complete communications data; Reader device can be used for debugging and behavior analysis.
- Low Frequency:Operating card mode: read ID, HID, T55XX, Indala and other low-frequency card.By T55XX card write ID / HID / Indala, turned into three cards; Analog card mode: Enter ID / HID card, analog to the specified card type.Analog modulation schemes specified data cards and ASK / FSK / PSK
- Silent Mode:Silently sniff data between the card and the reader (less, not tested)


Package List:
- 1  X  PM3 Easy main board Built-in high-frequency antenna (firmware 2.0.0)
- 1  X  enclosure cover
- 1  X  USB line
- 6 X  protective film

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha