SS-1.3G-1W-L 1.2/1.3G 1W Proable Wireless Image Audio Video Transmitter Receiver

SS-1.3G-1W-L 1.2/1.3G 1W Proable Wireless Image Audio Video Transmitter Receiver

Product Description:
- SS-1.3G-1W-L transmitter Taiwan inport,built-in chargable lithium battery 3000mA,the battery endurance work can reach 2 hours.low temperature,small size,exquisite,super thickness;wide frequency option,1080-1360MHz,8-channel can be chose,anti blocking frequency, strong anti-interference, good penetration;Android USB charging port,convenient to hold and use.2.5mm jack connect to small size camera lens.It is especially suitable for wireless take photos and video recording to obtain evidence in complex blocking interference city environment.
- Frequency:1080-1360 MHz
- Transmission power:1000mW
- The transmitter and the receiver co-channel pairing use
- Wide frequency option,1080-1360MHz,8-channel can be chose,anti blocking frequency, strong anti-interference, good penetration
strong anti-interference,
- Good confidentially and little distortion,you don't need to wire.
- Compatible DVD,DVR,Camera,IPTV,Satellite set-top box,Digital TV set-top box and other audio video output device.Used to monitor or family audio video
transmitter.
- Wireless receiver image clear and stable,colourful,Clear timbre, no noise
- Support PAL/NTSC standard video transmisson
- All hardware design,you don't need to install software,plug and play,simple and convenient
- Especially used for blocking interference city environment

Market Android mobile phone charging wire,Micro USB interface both can charge.

Transmitter Performance parameter:
- Working voltage:DC 5V (AV interface ouput voltage DC 5V)
- Built-in chargable lithium battery capacity:3.6V/3000mA (It can continuously work 2 hours.)
- Working Frequency:1080-1360MHz (8-channel can be chose)
- Outline dimenion:91X61X13mm

Wireless receiver Performance parameter:
- Digital display,12channel receiver
- Working voltage:DC 12V (Provide DC 12V 1A power adapter)
- Working Frequency:910-1360MHz (12 channel,eight channel can code using with this transmitter)
- Outline dimenion:130X80X21mm (Antenna is not included)
- Weight:140g (Antenna is not included)

Attention:You need to fasten the antenna for the tranmitter and receiver before powering on and working.Otherwise the power amplifier tube and the mainboard will be damaged.

Problems:
- The transmission distance is completely different in different environment,because there are high barriers, bottom wall thickness,sparse trees and so on, For example,the 2000mW transmitter can pass 1-1.5 km no-barrier in open environment.
In the open urban barrier free environment ,It can transfer 500-800 meters.
But it can merely transfer two hundred meters or few tens of meters in the crowed building environment and it can not transfer possibly.
If in the barrier environment,you can choose to add outdoor antenna and you place outdoor antenna frame to the highest position.Make the distance between the antenna and the antenna broadened and can see each other, then the transmission distance is the transmission distance   marked on the date.
- How do you test the wireless video transmission system you just bought?
Answer: A.First,make the camera (camera) power on, connected to the monitor (TV), confirmed that the camera (camera) and monitor (TV) can work properly; B.Connect the camera to the transmitter,receiver and power supply, connect the receiver,the monitor and power supply, and then adjust button on the the receiver to select channel, make sure that the receiver channels and transmitter channels exactly the same; you can use this equipment normally.
- Our transmitter receiver system can provide 4 channels.That' to say,you can use 4 points at mot in the same area present.
- Can other people receive my signal durning using the wireless video transmitter receiver system?
It there is someone uses our wireless video transmitter receiver system in the nearby area,he may receive your signal.If you have some special needs,we can provide image/sound encode transmission service.

Package List:
- 1 x  Transmitter
- 1 x  Wireless receiver
- 1 x  Charging wire