Syntron 220VAC 50Hz Single-Phase Brushless Motor Driver BL-2203C for CNC

Syntron 220VAC 50Hz Single-Phase Brushless Motor Driver BL-2203C for CNC

Features:
- 220VAC power supply
- Input and output signals optically isolated
- Start-stop and steering control
- Overcurrent, overvoltage, overload and stall
- Tachometer signal output
- Fault alarm output
- Motor speed display
- External analog speed
- Parking brake function
- Multi-speed selection

Electrical properties ( ambient temperature at 25deg C ):
- Electricity Supply Source: Single-phase 220VAC (± 15%), 50Hz, capacity 0.8KVA
- Rated power: Maximum 600W ( depending on the distribution motor may be)
- Rated speed: OK (8000 rev / min max) depending on the selected motor
- Rated torque: Determined in accordance with the selected motor
- Note 1 speed range adjustment: 150RPM ~Rated speed
- Speed rate of change of the load Note 2: ± 2%Less ( rated speed)
- Speed rate of change of the voltage: ± 1%Less ( supply voltage ± 10%, rated speed no load)
- Speed rate of change of temperature: ± 2%The following (25 ~ 40 rated speed no load )
- Insulation resistance: Under normal temperature and pressure \u003e 100M
- Insulating intensity: At room temperature under normal pressure 1KV, 1

Note 1:Rated voltage and load matching to the Company under the motor measured .
Note 2 :Steady speed error of no-load and rated load .

Environment and parameters:
- Cooling: Built-in cooling fan (in the heavy-duty and harsh environments need to provide auxiliary heat )
- Occasion: Avoid dust, oil mist and corrosive gases
- Temperature:0 ~ + 45 deg C
- Humidity: 80% RH, no condensation , no frosting
- Shock: 5.9m/ s2Max
- Storage temperature: -20 ~ + 65deg C
- Volume: 183 × 116 × 63mm
- Weight: 1.0Kg

Package included:
- 1 x Brushless Motor Driver