|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$191.51||$187.60||$181.74||$173.92||Contact US|
Upgrade 4 Axis USB Mach3 CNC Motion Control Card Breakout Board 2MHz Windows 7
Product Description:This is the latest generation 4 axis motion control card, which is the fourth generation calling MK4-IV. The maximum step-pulse frequency is 2000 KHz ( The last generation MK4-III is 400 KHz). Now MK4-IV is stronger, more stable and better performance.
1. Dual-Processors, ARM+FPGA, More processing power
2. Support all versions of Mach3 (can't work with Mach4).
3. Work under Windows 32-bit operating system (not including Mac OS)
4. USB jack does not need to install the driver, plug and play under all versions of Windows.
5. Full support USB hot-swappable, USB connection status monitoring at any time. Under Mach3 working state, USB cable unplugs and then plugs in, but also the normal connection.
6. Supports 4-axis linkage.
7. Maximum step-pulse frequency is 2000 KHz, can connect servo driver/stepper driver.
8. The indicator light indicates various working status, such as USB connection, Mach3 connection and so on.
9. 16 input IO.
10. Onboard isolated power supply , not need external power supply.
11. All IO port fully isolated, strong anti-interference, stable performance.
12. Support spindle speed PWM output; support spindle pulse and direction output; support spindle speed output from 0 to 10V analog voltage.
13. Support XHC series of wireless electronic mach3 MPG, such as WHB04 MPG.
14. With an aluminum shell, effectively shielding interference, stable and reliable performance.
Motion control card Dimensions:184 * 110 *30 mm
Electrical Characteristics Parameter:
- CPU:Dual-Processors, ARM+FPGA
- Axis output control:
Drive Current:Isolated open collector output; 5V, 20mA
Drive:Pulse + direction output
Output frequency:2000 KHZ
- Spindle inverter output:
Analog voltage output:0-10V
PWM output:5V, 1KHZ, Duty; 0-100%
Pulse + direction output:5V, 15HZ to 4 KHZ
-Spindle speed input
Input:Isolated input, 5V pulse signal
- 8 IO output:
Drive Current:Isolation: 50mA, 25V
- 16 IO input
Input Current:Isolated inputs, 5 mA, maximum voltage 25V
Mach3 Port Position:P1 Port
- USB interface:Complies with USB2.0 standard
1 x CNC Mach3 USB 4 Axis Motion Control Card
1 x USB Cable
1 x CD
1 x English Manual