|Quantity||3+ units||10+ units||30+ units||50+ units||More|
|Price /Unit||$8.52||$8.34||$8.08||$7.73||Contact US|
Wireless RF Transceiver Module 915MHz CC1101 CC110 Remote Control Arduino Robot
- Micro-power wireless data transmission module.
- Using high-performance TI-Chipcon's CC1101 wireless commucications chip.
- The maximum transmission data rates up to 500Kbps, rate can modify by software.
- Coverage up to 300~500 meters in open areas.
- with a wireless wake-up features, sensitivity to -110dBm, high reliability.
- working in the 915MHz frequency band. Compliance ETSI（EN300-220-1 & EN301-439-3), Compliance the requirements of wireless control, no need to apply frequency usage license.
- (Docs & Setup software will sent to your ebay email box upon you purchase)
- Both SMA & helical antenna available for buyer's choice:
- Operating voltage: 1.8V ~ 3.6V (recommended 3.3V)
- The maximum rate of 500kbps, support for 2-FSK, GFSK and MSK modulation.
- Setup softwafe can modify Rate, Power, Frequency.
- High sensitivity (1.2Kbps under-110dBm, 1% packet error rate)
- Built-in hardware CRC error detection, and address control.
- Programmable control of output power, up to +10 dBm.
- Wireless wake-up functionality to support low-power electromagnetic activation, wireless wake-up low-power sleep state of the equipment.
- Support the transmission channel before the auto-clean-up visits (CCA), the Carrier Sense System.
- Fast frequency changes brought about by a suitable synthesizer frequency hopping system.
- Module can be software-based address, software programming is very convenient.
- Standard 2.0mm DIP spacing interfaces for embedded applications.
- Separate 64-byte RX and TX data FIFO.
- Transmission Distance: open to the actual transmission distance 250-300 meters (depending on the specific situation of the environment and communication baud rate settings.
- Dimensions: 29 mm (L) x 16 mm (W) x 1 mm (H).
- 1x915mhz cc1101 Module with Spring Antenna