APM Pixhawk Wireless WIFI Telemetry Can Replace 3DR Data Transmission Module Support Phone PC

APM Pixhawk Wireless WIFI Telemetry Can Replace 3DR Data Transmission Module Support Phone PC

Description:
- WIFI telemetry, replacing traditional 3DR telemetry, using phone, pad, PC as receiving terminal, and hvae realtime transmission of flying state and related date information.
- After connected, transmitter and receiver can be used at the same time, After WIFI telemetry is connected with flight control, installing ground station, searching WIFI with phone. You don't need to distinguish 915 and 433, nor you need to choose baud rate, the default is 57600, with 2pcs APM and PIX data connecting cable for users
- External 2.4G soft WIFI antnna, 2dB gaining, 10cm length, convenient for users to installation

Parameters:
- Wireless standard:
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
- Wireless transmission rate:
11n: max can reach 150Mbps
11g: max can reach 54Mbps
11b: max can reach 11Mbps
- Channel Number: 1-14
- Frequency range: 2.4---2.4835G
- Transmitting rate: 14-18 DBM
- Interface: serial port, GPIO
- Antenna type: external antenna
- Transmission distance: 300-800m
- WIFI working mode
- Wireless network card / wireless access point
- Wireless security
- Wireless security features 64/128/152 bit WEP encryption
- WPA/WPA2, WPA-PSK/WPA2-PSK security mechanism
- Transmission rate: 57600bps
- TCP connection
- Maximum connection number 4

Other parameters
- Status indicator
- Status indicator
- Environmental standard
- Working temperature: -20-70
- Working humidity: 10%-90%RH (not setting)
- Storage temperature: -40-80
- Storage humidity: 5%-90%RH (not setting)
- Other properties
- Band bandwidth optional: 20MHz, 40MHz, automatic