{"title":"Flight Control \u0026 GPS","description":"","products":[{"product_id":"tiny-flight-controller-gps-fixed-wing-fpv-returning-function-balance-flight-control-arkbird-1","title":"Arkbird Tiny Flight Controller GPS Fixed-Wing FPV Returning Function Balance Flight Control","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Arkbird Flight Control Board ,with intelligent system,tilt angle function\u003c\/p\u003e\n\u003cp\u003e- Automatically Fly when the rocker indicate to 45 degree \u003c\/p\u003e\n\u003cp\u003e- ARKBIRD with 3 Axis Accelerate speed, gyro system\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Function all in one broad, on broad IMU (Inertial measurement unit).\u003c\/p\u003e\n\u003cp\u003e- Plug \u0026amp; Play, no soldering.\u003c\/p\u003e\n\u003cp\u003e- Intelligent PID controller. Easy to adjust, support delta-wing.\u003c\/p\u003e\n\u003cp\u003e- One button auto-leveling, semi-automatic flying\u003c\/p\u003e\n\u003cp\u003e- Lock angle 45°with MAX sticks, auto-leveling after releasing sticks.\u003c\/p\u003e\n\u003cp\u003e- Gyro 3D balance.\u003c\/p\u003e\n\u003cp\u003e- One button hover mode. regard the hover position as balance position.\u003c\/p\u003e\n\u003cp\u003e- 3 Axis Accelerate speed, gyro system, even for tough weather\u003c\/p\u003e\n\u003cp\u003e- Can be installed horizontal and vertical direction, also for mini quadcopter\u003c\/p\u003e\n\u003cp\u003e- Debug free, only need wire connection.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- GPS type: GPS 7.0\u003c\/p\u003e\n\u003cp\u003e- Applicable: like real machine ducted non-FPV\u003c\/p\u003e\n\u003cp\u003e- 32-bit CPU, intelligent adaptive control algorithm-free soldering design\u003c\/p\u003e\n\u003cp\u003e- Balance, GPS return, gyro stabilization, one-button crane, fence mode\u003c\/p\u003e\n\u003cp\u003e- ATT antenna automatic tracking: need adds external module   \u003c\/p\u003e\n\u003cp\u003e- Number of channels: 6 in 4 out\u003c\/p\u003e\n\u003cp\u003e- Mixed control: ordinary + delta wing\u003c\/p\u003e\n\u003cp\u003e- Power supply: BEC 5V\u003c\/p\u003e\n\u003cp\u003e- Airspeed RSSI PPM access support: PPM port\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x Flight Controller\u003c\/p\u003e\n\u003cp\u003e1 x Connect Cable\u003c\/p\u003e\n\u003cp\u003e1 x GPS Module \u003c\/p\u003e","brand":"Arkbird","offers":[{"title":"Default Title","offer_id":40824309514289,"sku":"60127","price":65.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076659593265_watermarked_0.jpg_0.png?v=1768079424"},{"product_id":"flight-controller-gps-fixed-wing-fpv-osd-full-set-cables-arkbird-2-1","title":"Flight Controller GPS Fixed-Wing FPV OSD Full Set Cables ARKBIRD 2.0","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- OPIONAL PLUG: T Plug, XT60 Plug \u003c\/p\u003e\n\u003cp\u003e- Standard high precision digitized airspeed meter to protect the airspeed and ground speed\u003c\/p\u003e\n\u003cp\u003e- Brand new case and inner framework design, double CPUs design, and optimized sensor's anti-knock performance\u003c\/p\u003e\n\u003cp\u003e- High-definition OSD menu, graphical rolling flight interface, with Chinese menu and Chinese flight interface  \u003c\/p\u003e\n\u003cp\u003e- With settable flap control(can set 1-7 channel mix control aileron-flap)\u003c\/p\u003e\n\u003cp\u003e- More mixed control include delta wing, V-tail, bio-motor, butterfly brake(Chanel 1, 2, 4, 7 to mix control)\u003c\/p\u003e\n\u003cp\u003e- Independent RSSI port(0-3.3V) and PPM port, support Arkbird 433MHz 10 channels + RSSI single wire output\u003c\/p\u003e\n\u003cp\u003e- Support \"Formation flight\", two Arkbird autopilots can show opposite position and auto track\u003c\/p\u003e\n\u003cp\u003e- Provide control value for some kinds of plane, such as skywalker 1680-1880 full serials, X5,X6,X7,X8 full serials, skyhunter, skysurfer, Mini talon and Nano talon. All parameters feedback from project actual flight and debug by a large of users\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Applicable: pixel level OSD animation interface\u003c\/p\u003e\n\u003cp\u003e- OSD type: Dual CPU + 8 OSD models are optional, real-time data map OSD display\u003c\/p\u003e\n\u003cp\u003e- ATT antenna automatic tracking: built-in AAT modulation mode fast\u003c\/p\u003e\n\u003cp\u003e- Number of channels: 6 in 6 out (with flap control)\u003c\/p\u003e\n\u003cp\u003e- Mixed control: ordinary + triangle + V tail + vertical takeoff and landing + butterfly brake + double set ordinary \u003c\/p\u003e\n\u003cp\u003e- Barometer: Yes\u003c\/p\u003e\n\u003cp\u003e- Airspeed interface: Yes\u003c\/p\u003e\n\u003cp\u003e- Power supply: Current is introduced into the power supply \u0026amp; BEC 5V \u003c\/p\u003e\n\u003cp\u003e- GPS type: GPS 8.0\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- 1 x Flight Control Board \u003c\/p\u003e\n\u003cp\u003e- 1 x Airspeed Meter \u003c\/p\u003e\n\u003cp\u003e- 1 x Current Sensor (XT60 Plug and T-Plug Optional)\u003c\/p\u003e\n\u003cp\u003e- 1 x GPS8.0\u003c\/p\u003e\n\u003cp\u003eFull set cables\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ePlug (T Plug \u0026amp; XT60 Plug) is OPTIOANL\u003c\/p\u003e\n\u003cp\u003eWhen you place an order, please do leave a message to tell us which type of plug you choose. Thank you.\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824310693937,"sku":"60144","price":183.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076660707377_watermarked_0.jpg_0.png?v=1768078814"},{"product_id":"data-ground-station-data-link-s-g-900m-for-a2-naza-wkm-with-2-4g-ground-station-digital","title":"Data Ground Station Data Link S\/G 900M for A2 NAZA WKM With 2.4G Ground Station Digital","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Support: For DJI NAZA, WKM, A2 flight control ( Not support A3, N3)  \u003c\/p\u003e\n\u003cp\u003e- Control distance is far.  \u003c\/p\u003e\n\u003cp\u003e- Transmission is stable, no packet loss, no loss of control.\u003c\/p\u003e\n\u003cp\u003e- Simple connection and low installation requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Size: 49.6*32*13.9mm\u003c\/p\u003e\n\u003cp\u003e- Color: Black\u003c\/p\u003e\n\u003cp\u003e- Weight: 27g\u003c\/p\u003e\n\u003cp\u003e- Power supply: For DJI flight control power supply \u003c\/p\u003e\n\u003cp\u003e- Power: 250mW\u003c\/p\u003e\n\u003cp\u003e- Transmission Distance: about 10 km  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x Transmit Station with Antenna\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824310956081,"sku":"60148","price":482.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076660969521_watermarked_0.jpg_0.png?v=1768078679"},{"product_id":"data-ground-station-data-transmit-machine-s-g-900m-for-a2-naza-wkm-1","title":"Data Ground Station Data Transmit Machine S\/G 900M for A2 NAZA WKM","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Support: For DJI NAZA, WKM, A2 flight control ( Not support A3, N3)\u003c\/p\u003e\n\u003cp\u003e- Control distance is far.\u003c\/p\u003e\n\u003cp\u003e- Transmission is stable, no packet loss, no loss of control.\u003c\/p\u003e\n\u003cp\u003e- Simple connection and low installation requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Size: 56.6*38*10.6mm \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Color: Dark Gray\u003c\/p\u003e\n\u003cp\u003e- Weight: 35g\u003c\/p\u003e\n\u003cp\u003e- Power supply: For DJI flight control power supply  \u003c\/p\u003e\n\u003cp\u003e- Power:1W\u003c\/p\u003e\n\u003cp\u003e- Transmission Distance: about 30 km \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x Transmit Station with Antenna\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824311021617,"sku":"60149","price":822.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076661035057_watermarked_0.jpg_0.png?v=1768078658"},{"product_id":"flight-controller-px4-pix2-4-8-32-bit-flight-control-four-axis-multi-rotor-fixed-wing-uav-pixhawk","title":"Flight Controller PX4 PIX2.4.8 32-bit Flight Control Four-axis Multi-rotor Fixed-wing UAV Pixhawk","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;\u003c\/p\u003e\n\u003cp\u003e- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;\u003c\/p\u003e\n\u003cp\u003e- Provide redundant power input and fault transfer function;\u003c\/p\u003e\n\u003cp\u003e- 14* PWM\/ actuator output;\u003c\/p\u003e\n\u003cp\u003e- Bus interface (UART, I2C, SPI, CAN);\u003c\/p\u003e\n\u003cp\u003e- Provide automatic and manual mode;\u003c\/p\u003e\n\u003cp\u003e- Color LED lamp;\u003c\/p\u003e\n\u003cp\u003e- Multi tone buzzer interface;\u003c\/p\u003e\n\u003cp\u003e- Micro SD to record flight data;\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e- Processor:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e  32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit\u003c\/p\u003e\n\u003cp\u003e  Main frequency: 256K, 168MHZ RAM \u003c\/p\u003e\n\u003cp\u003e  32 bit STM32F103 backup co processor\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e- Sensor:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e  L3GD20 3 axis digital 16 bit gyroscope\u003c\/p\u003e\n\u003cp\u003e  LSM303D 3 axis 14 bit accelerometer \/magnetometer\u003c\/p\u003e\n\u003cp\u003e  MPU6000 6 axis accelerometer \/ magnetometer\u003c\/p\u003e\n\u003cp\u003e  MS5611 high precision barometer\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e- Interface:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e  5* UART, 1*compatible high voltage, 2*hardware flow control\u003c\/p\u003e\n\u003cp\u003e  2*CAN\u003c\/p\u003e\n\u003cp\u003e  Spektrum DSM\/DSM2\/DSM-X satellite receiver compatible input\u003c\/p\u003e\n\u003cp\u003e  Futaba SBUS compatible input and output\u003c\/p\u003e\n\u003cp\u003e  PPM signal input\u003c\/p\u003e\n\u003cp\u003e  RSSI (PWM or voltage) input\u003c\/p\u003e\n\u003cp\u003e  I2C\u003c\/p\u003e\n\u003cp\u003e  SPI\u003c\/p\u003e\n\u003cp\u003e  3.3 and 6.6VADC input\u003c\/p\u003e\n\u003cp\u003e  External USB MICRO interface\u003c\/p\u003e\n\u003cp\u003eColor: Black\u003c\/p\u003e\n\u003cp\u003eSize: 50x82x16mm \u003c\/p\u003e\n\u003cp\u003eSet Weight: 52g                                \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 2.4.8 Pixhawk main control\u003c\/p\u003e\n\u003cp\u003e1 x Safety switch\u003c\/p\u003e\n\u003cp\u003e1 x Flight control shell\u003c\/p\u003e\n\u003cp\u003e1 x Buzzer\u003c\/p\u003e\n\u003cp\u003e1 x 6pin to 6pin line\u003c\/p\u003e\n\u003cp\u003e1 x 4Pin to 4Pin line\u003c\/p\u003e\n\u003cp\u003e1 x 3pin DuPont line\u003c\/p\u003e\n\u003cp\u003e1 x SD card\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824316067889,"sku":"60249","price":90.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076665720881_watermarked_0.jpg_0.png?v=1768064338"},{"product_id":"tarot-mini-flight-controller-for-racing-quadcopter-fpv-multicoper-zyx26","title":"Tarot Mini Flight Controller for Racing Quadcopter FPV Multi-copter ZYX26","description":"\u003cp\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003cbr\u003eTarot Racing Quadcopter ZYX26 Flight Controller is specially designed for racing game. Self-stabilize mode and manual mode is all available. It is compliant with Cleanflight software. It is suitable for flight control of 120, 130, 140, 150, 180 race-level FPV multi-copter. \u003cbr\u003e\u003cbr\u003eTarot ZYX26 Flight Controller helps you attitude stabilization of multi axis aircraft, to provide you with the vehicle on the current state that allows you to freely control the flying direction of the aircraft. It is beyond your imagination. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Main controller size: 38×28×9MM\u003cbr\u003e- USB connector size: 37.5×16.5×6MM\u003cbr\u003e- Calibration software: Clean Flight\u003cbr\u003e- G.W.: 0.25kg \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Main Flight Controller \u003cbr\u003e- 1 x USB Connector for Calibration \u003cbr\u003e- 1 x Bunch of Connection Wires \u003cbr\u003e\u003c\/p\u003e","brand":"Tarot","offers":[{"title":"Default Title","offer_id":40824317673521,"sku":"60294","price":33.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076667162673_watermarked_0.jpg_0.png?v=1768063815"},{"product_id":"10km-wireless-radio-data-modem-ultra-long-range-radio-modem-for-fpv-drone-rfd900u","title":"10KM Wireless Radio Data Modem Ultra Long Range Radio Modem for FPV Drone RFD900u","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eFeatures:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e- The smallest, lightest, and very sensitive digital data transmission device on the market\u003cbr\u003e- AES hardware encryption for secure data links\u003cbr\u003e- Long distance greater than 10km depending on antenna and GCS settings\u003cbr\u003e- 2 u.FL RF connectors, diversity switches\u003cbr\u003e- 100mW (+20dBm) transmit power\u003cbr\u003e- Integrated transmit low-pass filter reduces interference to other co-located radio links\u003cbr\u003e- High-linearity low noise amplifier (LNA) with the latest technology pHEMT, high gain greater than 24dB\u003cbr\u003e- Receive SAW filter to block out-of-band interference\u003cbr\u003e- 128kB flash, 8kB RAM, more space can be customized.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePorts:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- RF: 2pcs u.FL\/IPX connectors \u003cbr\u003e- Series: TTL\u003cbr\u003e- Power Supply: +5V, Peak 300mA (When it is of the biggest transmitting power)\u003cbr\u003e- GPIO: 2pcs universal IO (Digital, ADC, PWM functions)\u003cbr\u003e- Connector: DF13, 8-Way Connector \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- Frequency Range: 902 - 928 MHz\u003cbr\u003e- Output Power: 100mW (+20dBm)\u003cbr\u003e- \u003cb\u003eAir Data Transmission Rates:  \u003c\/b\u003e\u003cbr\u003e  4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192 and 250 kbit\/sec (Optional, 64k default)\u003cbr\u003e- \u003cb\u003eUART Data Transmission Rates:\u003c\/b\u003e\u003cbr\u003e  2400, 4800, 9600, 19200, 38400, 57600, 115200 baud (Optional, 57600 default)\u003cbr\u003e- Receiving Sensitivity: \u003cbr\u003e  \u0026lt;-111dBm at 9.6kpbs, \u003cbr\u003e  \u0026lt;-107 dBm at 64kbps, \u003cbr\u003e  \u0026lt;-105dBm at 129kbps (air serial speed)\u003cbr\u003e- Size: 19 x 30.4 x 4.5mm (W*L*Thickness)\u003cbr\u003e- Weight: 2.7g \u003cbr\u003e- Power Supply: \u003cbr\u003e  +5V (+3.5 V min, +5.5 V max)\u003cbr\u003e  ~190mA avg. TX +20dBm\u003cbr\u003e  ~230mA peak TX +20dBm\u003cbr\u003e  ~77mA RX\u003cbr\u003e- Temperature Range: -40 to 85℃\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePackage Included\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- One Set of RDF900u Mini Module \u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60618-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824457855025,"sku":"60618","price":135.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076729585713_watermarked_0.jpg_0.png?v=1768059982"},{"product_id":"radio-data-modem-p900-antenna-for-flight-controller-ipx-amp-universal","title":"Radio Data Modem P900 + Antenna for Flight Controller IPX AMP Universal","description":"\u003cp\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-03.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Radio Data Modem \u003cbr\u003e- 1 x Antenna\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824457887793,"sku":"60619","price":121.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076729618481_watermarked_0.jpg_0.png?v=1768059972"},{"product_id":"radio-data-modem-p900-for-fpv-drone-pixhawk-amp-ttl-amp-rs232-version","title":"Radio Data Modem P900 For FPV Drone PIXHAWK AMP TTL and RS232 Version","description":"\u003cp\u003e\u003cb\u003eRecommended Power Supply: 9-24V \u003c\/b\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eParameters:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 819px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-03.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Radio Data Modem P900 For FPV Drone PIXHAWK AMP TTL \u0026amp; RS232 Version\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/60620-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60620-05.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824457920561,"sku":"60620","price":142.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076729651249_watermarked_0.jpg_0.png?v=1768059962"},{"product_id":"here-gps-rtk-gnss-for-pixhawk-2-autopilot-rover-m8p-for-agricultural-uav-drone","title":"HERE+ GPS RTK GNSS for Pixhawk 2 Autopilot Rover M8P for Agricultural UAV Drone","description":"\u003cp\u003e\u003cb\u003eHighlights:\u003c\/b\u003e\u003cbr\u003e- Centimeter level GNSS positioning for the mass market\u003cbr\u003e- Integrated Real Time Kinematics (RTK) for fast time to market\u003cbr\u003e- Smallest, lightest, and energy‑efficient RTK module\u003cbr\u003e- Complete and versatile solution due to base and rover variants \u003cbr\u003e\u003cb\u003e\u003cbr\u003eOther Features: \u003c\/b\u003e\u003cbr\u003e- Breakaway mount\u003cbr\u003e- 4 compass options (Alpha testers only)\u003cbr\u003e- MPU9250 IMU (for future Breakaway detection and compensation)\u003cbr\u003e- MS5611 Barometer\u003cbr\u003e- 6CM Ground plane\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x HERE+ GPS RTK GNSS \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824491114545,"sku":"61259","price":425.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076753244209_watermarked_0.jpg_0.png?v=1768053546"},{"product_id":"ist8-external-compass-module-geomagnetic-sensor-ist8310-external-compass-for-pix-flight-controller","title":"IST8 External Compass Module Geomagnetic Sensor IST8310 External Compass for PIX Flight Controller","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eWith built-in 3×3mm LGA geomagnetic sensor IST8310, the IST8 compass module is widely used in UAV drones. It supports for PIX flight controller in PX4 and ArduPilot systems. It can be used as an external compass for V5 flight controller. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Compass: IST8310\u003cbr\u003e- Operating Temperature: -40 to 85℃ \u003cbr\u003e- Power Input: 5V\u003cbr\u003e- Interface: I2C\u003cbr\u003e- Weight: 5g\u003cbr\u003e- Size: 23*14*9mm\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e- Optional Version: for V5 I2C Interface; for PIX \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x External Compass Module \u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Please tell us your desired version when purchasing. Thank you! \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eInstallation:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201904\/61344-01.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSupported Firmware:\u003c\/b\u003e\u003cbr\u003eIt is suitable for the firmware of the CUAV V5 flight controller, supporting for both PIX and APM firmware. If you are using other flight controller, please contact our customer service. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompass Calibration: \u003c\/b\u003e\u003cbr\u003eSee compass calibration interface\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824498126897,"sku":"61344","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076758192177_watermarked_0.jpg_0.png?v=1768052849"},{"product_id":"gy-us42-ultrasonic-sensor-module-i2c-for-pixhawk-apm-flight-control-replacement-for-mb1242-srf02","title":"GY-US42 Ultrasonic Sensor Module I2C for Pixhawk APM Flight Control Replacement for MB1242 SRF02","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Premium ranging sensor module \u003cbr\u003e- This ultrasonic sensor module for Pixhawk APM \u003cbr\u003e- Plug and play with I2C interface \u003cbr\u003e- Replacement for MB1242, MB1240 \u0026amp; SRF02 \u003cbr\u003e\u003cb\u003e\u003cbr\u003eWebsite for Pixhawk APM Settings:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"http:\/\/ardupilot.org\/copter\/docs\/common-rangefinder-maxbotixi2c.html\"\u003ehttp:\/\/ardupilot.org\/copter\/docs\/common-rangefinder-maxbotixi2c.html\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eTechnical Parameters:\u003c\/b\u003e\u003cbr\u003e- Measuring Range: 20cm to 720cm (VCC=5V)\u003cbr\u003e- Resolution: 1cm\u003cbr\u003e- Response Frequency: 15Hz \u003cbr\u003e- Working Voltage: 3-5V\u003cbr\u003e- Operating Current: 9mA (VCC=5V)\u003cbr\u003e- Operating Temperature: -20℃ to 65℃\u003cbr\u003e- Storage Temperature: -40℃ to 85℃ \u003cbr\u003e- Dimensions: 21.5 x 21 x 24.5mm \u003cbr\u003e- Weight: 5g \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Ultrasonic Sensor Module \u003cbr\u003e- 6 x Pins Accessories \u003cbr\u003e\u003cspan style=\"background-color: inherit;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Only ultrasonic distance measuring module is included in this package. \u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 683px;\" src=\"https:\/\/www.byimg.com\/catalog\/201908\/62453\/62453-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824555339825,"sku":"62453","price":12.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076804231217_watermarked_0.jpg_0.png?v=1768035680"},{"product_id":"cuav-v5-version-airspeed-meter-differential-pressure-sensor-for-v5-flight-controller","title":"CUAV V5 Version Airspeed Meter Differential Pressure Sensor for V5 Flight Controller","description":"\u003cp\u003e\u003cb\u003eDifferential Pressure Sensor Board:\u003c\/b\u003e\u003cbr\u003eThe MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A\/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.\u003cbr\u003e \u003cbr\u003eThe MPXV7002 is designed to measure positive and negative pressure. In addition, with an offset specifically at 2.5V instead of the conventional 0V, this new series allows to measure pressure up to 7kPa through each port for pressure sensing but also for vacuum sensing (refer to the transfer function in the data sheet for more detailed information). Features: -2 to 2 kPa (-0.3 to 0.3 psi). 0.5 to 4.5 V Output\u003cbr\u003e\u003cb\u003e\u003cbr\u003eCalibration Introduction of Airspeed Meter:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"http:\/\/plane.ardupilot.com\/wiki\/calibrating-an-airspeed-sensor\/\"\u003ehttp:\/\/plane.ardupilot.com\/wiki\/calibrating-an-airspeed-sensor\/\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Airspeed Meter \u003cbr\u003e- 1 x Silicone Tube \u003cbr\u003e- 1 x 4-Pin Cable \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: It is a high-tech product. When your equipment fails, please carefully check the line and power supply voltage. \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40824577196081,"sku":"62759","price":51.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076817535025_watermarked_0.jpg_0.png?v=1768031135"},{"product_id":"arkbird-nano-rc-autopilot-for-small-fpv-xt60-plug-full-kit-flight-control-gps-mini-current-sensor","title":"Arkbird-Nano RC Autopilot for Small FPV XT60 Plug+Full Kit (Flight Control+GPS+Mini Current Sensor)","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eUltra small size! It is designed with single CPU, integrated pixel-level OSD, AAT airborne module and mini ammeter. The autopilot weights only 15.2g. It is perfect for racing drones and small FPV aircrafts.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Arkbird Nano Autopilot\u003cbr\u003e- 1 x Arkbird Nano Current Sensor \u003cbr\u003e- 1 x Arkbird Nano GPS\u003cbr\u003e- 1 x Full Set of Cables \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: Please note that the default plug is XT60. \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201910\/63013\/63013-01.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWiring:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/201910\/63013\/63013-02.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOSD Interface:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/201910\/63013\/63013-03.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- With high-precision digital airspeed meter interface. With airspeed \/ ground speed protection control.\u003cbr\u003e- HD pixel-level OSD menu with data graph display and 8 kinds of 3D animation plane models. \u003cbr\u003e- Integrated AAT airborne module for direct use with Arkbird AAT ground end.\u003cbr\u003e- Support Sbus or PPM input, 7-channel output, with stable PTZ output.\u003cbr\u003e- Intelligent flap control and release. You can set the speed to control flaps and 1-7 channels (aileron-flap) mixing control. \u003cbr\u003e- More mixed control methods include delta wing, V-tail wing, and bi-motor plane, bi-motor flying wing(differential steering) and butterfly brake (mixed control of 1247channel).\u003cbr\u003e- Support Arkbird433 10 channels + RSSI single line transmission. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e8 Basic Functions:\u003c\/b\u003e\u003cbr\u003e- Industrial reliability design, on-board buck chip. \"ESC + buck\" dual power supply.\u003cbr\u003e- Inertial measurement unit \u0026amp; air pressure to fix high. \u003cbr\u003e- Can be placed flat or sideways for models with small spaces.\u003cbr\u003e- Ultra-simple debugging, adaptive control algorithm, eliminating the need for complex tuning processes to suit a variety of models.\u003cbr\u003e- OSD display data + remote joystick to adjust parameters.\u003cbr\u003e- Various custom displays such as radar coordinates, real-time compass, flight time, horizon, and power consumption.\u003cbr\u003e- One button to balance, smart lock tilt system. The rocker is fully loaded with the corresponding locking angle of 45 degrees. When the rocker is released, your aircraft automatically flies.\u003cbr\u003e- Autonomous return. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e12 Expanded Functions:\u003c\/b\u003e\u003cbr\u003e- Auxiliary Takeoff: Push the throttle and it will not output the throttle. Wait to run. You run with an airplane in hand at speeds greater than 5kmph, the throttle opens and automatically controls takeoff.\u003cbr\u003e- Fence Mode: Set a rectangular area and the minimum height. Your aircraft will automatically return once it is out of the area. Suitable for beginners to practice flying.\u003cbr\u003e- Waypoint Mode: Cycle through the set points.\u003cbr\u003e- Crane Mode: Take the vertical direction of the nose as the balance point, your aircraft can fly vertically and hover.\u003cbr\u003e- Route (fixed height orientation): When the joystick is back, it locks the altitude and heading, your airplane will fly in a straight line.\u003cbr\u003e- Intelligent Flap Control: When the airspeed\/ground speed is lower than the safe speed, flaps are lowered proportionally to increase the lift.\u003cbr\u003e- Flying Wing Butterfly Control: The rudder surface works like a damper plate to achieve smooth rudder steering of the flying wing.\u003cbr\u003e- Data Recording: Record flight time, range, power consumption and maximum records (height, distance, speed, current).\u003cbr\u003e- 3D Gyro Mode: The amount of rudder in the opposite direction is provided when aircraft body is moving. There is no rudder when there is no action to ensure the 3D attitude.\u003cbr\u003e- Stabilizing PTZ: Connect the 5 and 6 output channels to the servo PTZ. When tilting the aircraft, it will give a compensation amount in the opposite direction to keep the camera level.\u003cbr\u003e- Semi-balance Mode: It is in balance mode when the rocker rudder amount is less than 50%. When it is over 50%, it is in gyro mode, which can realize large-angle turning and even vertical climbing and rolling. After the action maneuver is completed, the joystick can be returned to the middle.\u003cbr\u003e- Vertical Take-off and Landing: Support dual-shot vertical take-off and landing models. You can adjust the parameters.\u003cbr\u003e\u003c\/p\u003e","brand":"Arkbird","offers":[{"title":"Default Title","offer_id":40824621760561,"sku":"63013","price":79.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076833034289_watermarked_0.jpg_0.png?v=1768027394"},{"product_id":"cuav-can-pmu-power-management-unit-voltage-current-tester-w-cables-for-v5-series-flight-control-pix-drone","title":"CUAV CAN PMU Power Management Unit Voltage Current Tester w\/ Cables For V5 Series Flight Control PIX Drone","description":"\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-05.jpg\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x CAN PMU Module \u003cbr\u003e- 1 x Cable For Battery (Battery is not included)\u003cbr\u003e- 1 x Cable For ESC \u003cbr\u003e- 1 x Power Cable For V5 Series Flight Control \u003cbr\u003e- 1 x CAN Cable \u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40824696438833,"sku":"63499","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076863311921_watermarked_0.jpg_0.png?v=1768019298"},{"product_id":"6ch-flight-mode-switcher-for-apm-pix-jiyi-support-for-futuba-6ex-ap-frsky-t6-saitek-x52-pro","title":"6CH Flight Mode Switcher For APM PIX JIYI Support For Futuba 6EX AP\/Frsky T6\/Saitek X52 Pro","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Mini size \u003cbr\u003e- Stable performance \u003cbr\u003e- Easy operation \u003cbr\u003e- Designed for open source flight control systems such as APM, PX4, and PIX. It can accurately and quickly switch the various flight modes it has, replacing the cumbersome way of 2CH or 3CH switch\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Flight Mode Switcher \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: Other items pictured are not included in the package, for demonstration purposes only. \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 752.75px; height: 701.939px;\" src=\"https:\/\/www.byimg.com\/catalog\/65845\/65845-02.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 557px;\" src=\"https:\/\/www.byimg.com\/catalog\/65845\/65845-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825268437041,"sku":"65845","price":12.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077034852401_watermarked_0.jpg_0.png?v=1767982931"},{"product_id":"cuav-flight-controller-open-source-for-apm-px4-pixhawk-fpv-rc-drone-quadcopter-x7-pro-version","title":"CUAV Flight Controller Open Source For APM PX4 Pixhawk FPV RC Drone Quadcopter X7 Pro Version","description":"\u003cp\u003e\u003cb\u003eDifference Between X7 \u0026amp; X7 Pro:\u003c\/b\u003e\u003cbr\u003eX7 Pro replaces the ICM-20689 chip on X7 with a high-end ADIS16470 chip. Because of its excellent gyro and acceleration drift performance, it is used in some cutting-edge aerospace projects. This time, we introduced it to open source flight control. After careful polishing, it is integrated into the IMU with triple redundancy and exerts excellent performance. The sizes of these two versions are the same. \u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-02.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-03.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-05.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-06.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-07.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-08.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-09.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-13.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-14.jpg\"\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825268633649,"sku":"65850","price":1180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077035049009_watermarked_0.jpg_0.png?v=1767982859"},{"product_id":"flight-controller-obstacle-avoidance-sensor-altitude-ultrasonic-i2c-module-for-pixhawk-pix2-4-8-apm2-8-pixhack","title":"Flight Controller Obstacle Avoidance Sensor Altitude Ultrasonic I2C Module for PIXHAWK PIX2.4.8 APM2.8 PIXHACK","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e1. Excellent Performance: The module adopts a high-performance main processor to process the data required for altitude, convenient for different occasions and different needs. Ultrasonic comes with temperature compensation to avoid the influence of temperature on the accuracy of ultrasonic ranging.\u003cbr\u003e2. High Quality: The module adopts high-quality hardware resources to ensure the stable and reliable operation of the system.\u003cbr\u003e3. Easy to Use: The module is simple and easy to use, no need to change the hardware or software, plug and play.\u003cbr\u003e4. Ultrasonic Range: The ultrasonic range is 0.02~4.5M.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e1 x Obstacle Avoidance Sensor\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825334169649,"sku":"66160","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077060706353_watermarked_0.jpg_0.png?v=1767977881"},{"product_id":"cuav-tf02-pro-40m-laser-distance-sensor-single-point-lidar-sensor-for-v5-flight-control-pix-apm-uav","title":"CUAV TF02-Pro 40M Laser Distance Sensor Single Point Lidar Sensor For V5 Flight Control PIX APM UAV","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eTF02-Pro is a single-point ranging Lidar based on TF02 upgrade. The performance and accuracy of different reflectivity are improved, it can achieve stable, accuracy, sensitive and high frequency range detection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- The range up to 40 meters\u003cbr\u003e- Ambient light resistance(Up to 100Klux)\u003cbr\u003e- High frame rate(up to 1000Hz)\u003cbr\u003e- Low power consumption\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Applications:\u003c\/b\u003e\u003cbr\u003e- Intelligent traffic\u003cbr\u003e- Intelligent parking lots\u003cbr\u003e- Material level monitoring\u003cbr\u003e- UAV\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Laser Distance Sensor\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 800.748px; height: 892.033px;\" src=\"https:\/\/www.byimg.com\/catalog\/66946\/66946-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 799.75px; height: 818.144px;\" src=\"https:\/\/www.byimg.com\/catalog\/66946\/66946-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800.343px; height: 583.45px;\" src=\"https:\/\/www.byimg.com\/catalog\/66946\/66946-03.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825541263409,"sku":"66946","price":99.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116149809_watermarked_0.jpg_0.png?v=1767964958"},{"product_id":"cuav-ammeter-current-meter-input-10-62v-max-120a-for-drone-aircraft-x7-series-pix-flight-control","title":"CUAV Ammeter Current Meter Input 10-62V Max 120A For Drone Aircraft X7 Series PIX Flight Control","description":"\u003cp\u003e\u003cb\u003eMain Functions:\u003c\/b\u003e\u003cbr\u003e1. Support 10-62V voltage input\u003cbr\u003e2.Maximum Passing Current: Max. 120A\u003cbr\u003e3. Measurement Accuracy: current accuracy 0.3A, voltage accuracy 0.15V within 80A\u003cbr\u003e4. Regulated Output: can provide up to 22W 5.4V\/4A power supply output for peripherals\u003cbr\u003e5. Power supply indicator LED, indicating power supply voltage status\u003cbr\u003e6. Future upgrades support more functions such as power consumption statistics and instantaneous power consumption push \u003cbr\u003e\u003cb\u003e\u003cbr\u003eHardware Parameters:\u003c\/b\u003e\u003cbr\u003e- Processor: STM32F103CBU6\u003cbr\u003e- Input voltage: 10-62V (2-15S Lipo)\u003cbr\u003e- Maximum current: 120A (Maximum measurable current 80A)\u003cbr\u003e- Voltage accuracy: ±0.15V\u003cbr\u003e- Current accuracy: ±0.3A\u003cbr\u003e- Resolution: 0.01A\/V\u003cbr\u003e- Maximum output power: 4800W\/90S\u003cbr\u003e- Maximum stable output power: 3600W\u003cbr\u003e- 5V regulated output: maximum 5A, stable 4A\u003cbr\u003e- Communication protocol: UAVCAN\u003cbr\u003e- Working temperature: -20 to 100℃\u003cbr\u003e- Firmware upgrade: support\u003cbr\u003e- Interface type: \u003cbr\u003e* IN\/ OUT: XT60-M\/XT60-F\u003cbr\u003e* Power\/CAN: 502585-0670\u003cbr\u003e* Other: SMO6B-CHS-TB\u003cbr\u003e- Product size: 140 x 25 x 13 mm (LxWxH)\u003cbr\u003e- Support for PX4 firmware: For version above PX4 Pro V1.10.1\u003cbr\u003e- Support for APM firmware:\u003cbr\u003e1. For Rover 3.5.1 and above\u003cbr\u003e2. For Copter 3.7 and above\u003cbr\u003e3. For Plane 3.10 and above\u003cbr\u003e4. For Heli3.7 and above\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAttention: \u003c\/b\u003e\u003cbr\u003eUsers for Copter3.6 firmware need to flash version 3.7 firmware and then flash back to version 3.6.\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Ammeter \u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Battery is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825542180913,"sku":"66951","price":51.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116411953_watermarked_0.jpg_0.png?v=1767964888"},{"product_id":"cuav-hv-pm-power-module-ammeter-xt60-connector-support-60v-5a-for-pixhack-flight-control","title":"CUAV HV-PM Power Module Ammeter XT60 Connector Support 60V 5A For Pixhack Flight Control","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Support higher input voltage: 10V-60V (3s~14s battery), Battery is not included\u003cbr\u003e- More accurate current and voltage detection: Voltage detection accuracy: ±0.1v; Current detection accuracy: ±0.2A\u003cbr\u003e- Support higher output current of power supply port: 5A\u003cbr\u003e- Maximum (detection) current: 60A \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Functions:\u003c\/b\u003e\u003cbr\u003e1. Provide 5V voltage output and maximum 5A current to power your flight controller\u003cbr\u003e2. Detect current voltage and output analog signal to flight controller\u003cbr\u003e3. Detect current system current and output analog signal to flight controller\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAttention:\u003c\/b\u003e\u003cbr\u003e- Because the maximum detection voltage for PIX flight control ADC is 3.3, it can only detect a maximum of 60A current.\u003cbr\u003e- It is easy to use. 6P signal line is inserted into flight control POWER interface.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Module Size: 32mm * 2mm\u003cbr\u003e- Product Weight: 29g\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of HV-PM Power Module\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: Battery is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eGround Station Settings:\u003c\/b\u003e\u003cbr\u003e- Connect to ground station using USB or digital transmission \u003cbr\u003e- Initial Setup \u0026gt;\u0026gt; Optional Hardware \u0026gt;\u0026gt; Battery Detector (Battery not included)\u003cbr\u003e- Select Monitor: 4; Sensor 0; For APM version 4; Fill in partial voltage ratio 18; Fill in amps per volt: 24\u003cbr\u003e\u003cb\u003e \u003cbr\u003eManual Voltage Calibration:\u003c\/b\u003e\u003cbr\u003eBecause PM modules are analog sensor devices, there may be certain differences. The parameters can be calibrated to obtain better accuracy.\u003cbr\u003e\u003cbr\u003e\u003cu\u003ePreparation Before Calibration:\u003c\/u\u003e\u003cbr\u003e1: Multimeter or low-voltage alarm (for calibration voltage)\u003cbr\u003e\u003cbr\u003e\u003cu\u003eCalibrating Voltage Steps:\u003c\/u\u003e\u003cbr\u003e1: Battery powered and connected to ground station;\u003cbr\u003e2: Use a multimeter or low-voltage alarm to measure current battery voltage;\u003cbr\u003e3: Select sensor version as 0, input measured voltage into measured battery voltage box, just click your mouse or click TAB key, ground station will automatically calculate a voltage division ratio coefficient and automatically save and write to flight control;\u003cbr\u003e4: Calibration is complete, no calibration is required for current.\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825542279217,"sku":"66952","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116477489_watermarked_0.jpg_0.png?v=1767964879"},{"product_id":"cuav-hv-pm-power-module-ammeter-xt60-connector-support-60v-5a-for-v5-v5-flight-control","title":"CUAV HV-PM Power Module Ammeter XT60 Connector Support 60V 5A For V5\/V5+ Flight Control","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Support higher input voltage: 10V-60V (3s~14s battery), Battery is not included\u003cbr\u003e- More accurate current and voltage detection: Voltage detection accuracy: ±0.1v; Current detection accuracy: ±0.2A\u003cbr\u003e- Support higher output current of power supply port: 5A\u003cbr\u003e- Maximum (detection) current: 60A \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Functions:\u003c\/b\u003e\u003cbr\u003e1. Provide 5V voltage output and maximum 5A current to power your flight controller\u003cbr\u003e2. Detect current voltage and output analog signal to flight controller\u003cbr\u003e3. Detect current system current and output analog signal to flight controller\u003cbr\u003e\u003cb\u003e\u003cbr\u003eAttention:\u003c\/b\u003e\u003cbr\u003e- Because the maximum detection voltage for PIX flight control ADC is 3.3, it can only detect a maximum of 60A current.\u003cbr\u003e- It is easy to use. 6P signal line is inserted into flight control POWER interface.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Module Size: 32mm * 2mm\u003cbr\u003e- Product Weight: 29g\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of HV-PM Power Module\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Battery is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eGround Station Settings:\u003c\/b\u003e\u003cbr\u003e- Connect to ground station using USB or digital transmission \u003cbr\u003e- Initial Setup \u0026gt;\u0026gt; Optional Hardware \u0026gt;\u0026gt; Battery Detector (Battery not included)\u003cbr\u003e- Select Monitor: 4; Sensor 0; For APM version 4; Fill in partial voltage ratio 18; Fill in amps per volt: 24\u003cbr\u003e \u003cbr\u003e\u003cb\u003eManual Voltage Calibration:\u003c\/b\u003e\u003cbr\u003eBecause PM modules are analog sensor devices, there may be certain differences. The parameters can be calibrated to obtain better accuracy.\u003cbr\u003e \u003cbr\u003e\u003cu\u003ePreparation Before Calibration:\u003c\/u\u003e\u003cbr\u003e1: Multimeter or low-voltage alarm (for calibration voltage)\u003cbr\u003e\u003cbr\u003e\u003cu\u003eCalibrating Voltage Steps:\u003c\/u\u003e\u003cbr\u003e1: Battery powered and connected to ground station;\u003cbr\u003e2: Use a multimeter or low-voltage alarm to measure current battery voltage;\u003cbr\u003e3: Select sensor version as 0, input measured voltage into measured battery voltage box, just click your mouse or click TAB key, ground station will automatically calculate a voltage division ratio coefficient and automatically save and write to flight control;\u003cbr\u003e4: Calibration is complete, no calibration is required for current.\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825542344753,"sku":"66954","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116543025_watermarked_0.jpg_0.png?v=1767964860"},{"product_id":"pixhawk4-flight-controller-plastic-version-w-pm07-power-management-board-m8n-led-buzzer-gps-module","title":"Pixhawk4 Flight Controller Plastic Version w\/ PM07 Power Management Board M8N LED Buzzer GPS Module","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters\u003cb\u003e:\u003c\/b\u003e https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Plastic Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Holder\u003cbr\u003e-1 x PM07 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675382833,"sku":"67440","price":227.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077165924401_watermarked_0.jpg_0.png?v=1767957366"},{"product_id":"pixhawk4-flight-controller-plastic-version-px4-apm-open-source-firmware-for-rc-drone-quadcopter","title":"Pixhawk4 Flight Controller Plastic Version PX4\/APM Open Source Firmware for RC Drone Quadcopter","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, andaNuttXreal-timeoperatingsystem,deliveringincredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Plastic Version)\u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675481137,"sku":"67443","price":150.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166022705_watermarked_0.jpg_0.png?v=1767957333"},{"product_id":"pixhawk4-flight-controller-aluminum-version-w-pm07-power-management-board-m8n-led-buzzer-gps-module","title":"Pixhawk4 Flight Controller Aluminum Version w\/ PM07 Power Management Board M8N LED Buzzer GPS Module","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CAN Buses for dual CAN with serial ESC, Each CAN Bus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Aluminum Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Holder\u003cbr\u003e-1 x PM07 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675776049,"sku":"67446","price":276.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166317617_watermarked_0.jpg_0.png?v=1767957294"},{"product_id":"aluminum-case-cover-shell-for-pixhawk4-px4-autopilot-2-4-8-32-bit-flight-controller","title":"Aluminum Case Cover Shell for Pixhawk4 PX4 Autopilot 2.4.8 32 Bit Flight Controller","description":"\u003cp\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003eMaterial: aluminum\u003cbr\u003eNet weight: 33g\u003cbr\u003eGross weight: 37g\u003cbr\u003eApplication: for Pixhawk 4 flight controller\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e1 x Aluminum Shell\u003cbr\u003e1 x Accessories Kit\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825690685489,"sku":"67480","price":61.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077172117553_watermarked_0.jpg_0.png?v=1767956847"},{"product_id":"for-jiyi-k-flight-controller-set-perfect-for-diy-agricultural-plant-protection-spray-drones","title":"For Jiyi K++ Flight Controller Set Perfect For DIY Agricultural Plant Protection Spray Drones","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eDescription: \u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003eAs a new generation of flagship flight control system, K++ combines the advantages of classic flight control K3A, and strengthens the compatibility and multi-redundancy scheme to form a redundant redundancy control system with superior performance and strong reliability. Work safe.\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003ePrecise Control: \u003cbr\u003eFlight accuracy increased by 25%.\u003cbr\u003eVertical control accuracy increased by 20%.\u003cbr\u003eThe trajectory is more precise and the flight is smoother.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eStrong Shock Resistance:\u003c\/b\u003e\u003cbr\u003eDouble shock absorption structure design.\u003cbr\u003eRespond to a variety of complex vibration effects.\u003cbr\u003eThe aging of the rack can also be stable.\u003cbr\u003eReduce investment in after-sales maintenance.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eMultiple Redundant Backup: \u003c\/b\u003e\u003cbr\u003eThree redundant IMU.\u003cbr\u003eDouble redundant barometer.\u003cbr\u003eFlying is safer.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eNoise Reduction and Power Saving:\u003c\/b\u003e\u003cbr\u003eMotor noise is three times smaller.\u003cbr\u003eProvince 5~15% electricity.\u003cbr\u003eThe flying sound is smaller.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eCalibration Free: \u003c\/b\u003e\u003cbr\u003eIndustrial grade sensor configuration.\u003cbr\u003eOne calibration.\u003cbr\u003eLifetime free IMU calibration.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAttitude Control:\u003c\/b\u003e\u003cbr\u003eThe attitude control stability is doubled.\u003cbr\u003eControl is more stable.\u003cbr\u003eBetter wind resistance.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eDual CPU Configuration:\u003c\/b\u003e\u003cbr\u003eDual CPU configuration.\u003cbr\u003eMore powerful processing.\u003cbr\u003eSupports up to 1000Hz ESC control.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eBackup Power:\u003c\/b\u003e\u003cbr\u003eThe main control supports the backup power interface.\u003cbr\u003eThe power supply is more reliable.\u003cbr\u003e\u003cb\u003e \u003cbr\u003eIntelligent Vibration Analysis Function:\u003c\/b\u003e\u003cbr\u003eK++ comes with intelligent vibration analysis function, which can determine the vibration of the aircraft in real time during flight, and display the safety warning in the APP to help adjust the adaptability of all aspects of the fuselage device, making the flight operation more energy efficient , safer and safer.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eMultiple Backups are Safer to Fly:\u003c\/b\u003e\u003cbr\u003eDuring the sensor, the sensor data of IMU is monitored in real time through advanced diagnostic algorithms. When the sensor in the navigation system is abnormal, the system immediately switches to another sensor. To ensure the safe flight of the aircraft.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eOne Calibration, Not Afraid of Environmental Interference:\u003c\/b\u003e\u003cbr\u003eAfter the same aircraft flight control system is installed, it only needs to be calibrated once. Even if the operating environment is replaced, it does not need to be recalibrated and is easy to Use.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eProduct Parameters:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003eSupported multi-rotor types:\u003cbr\u003eQuadcopter (+, X)\u003cbr\u003eHexacopter (+, X, IY and YI coaxial twins)\u003cbr\u003eOctocopter (+ type, X type, V type)\u003cbr\u003eSupported ESC type: 490HZ or less PWM ESC\u003cbr\u003eMaximum output channel: 8 channels\u003cbr\u003e \u003cbr\u003eRecommended remote control type\u003cbr\u003eSupported receiver types: For PPM, S-BUS receiver\u003cbr\u003eSupport expansion equipment: For K-BOX, IOT, RTK, obstacle avoidance radar, terrain radar, integrated remote control, FPV camera, flow meter, level gauge\u003cbr\u003eWorking voltage: 2-12S\u003cbr\u003ePower consumption: less than 5W\u003cbr\u003eWorking environment temperature: -10 to 60°C\u003cbr\u003eStorage environment temperature: -25 to 60°C\u003cbr\u003eEarthquake resistance rating: \u0026lt;1G\u003cbr\u003e \u003cbr\u003eFlight characteristics\u003cbr\u003eHovering accuracy: horizontal direction ±1.5 m; vertical direction ±0.5 m\u003cbr\u003eMaximum tilt angle: 30°\u003cbr\u003eMaximum yaw speed: 150°\/sec\u003cbr\u003eSBUS receiver Maximum vertical speed: 6 m\/s\u003cbr\u003eWind resistance: continuous wind: 4\u003cbr\u003eGust: Level 5\u003cbr\u003e\u003cbr\u003eFlight mode and function:\u003cbr\u003eAttitude mode, GPS mode, AB operation, route operation, one-button return loss control, out of control continue operation, low voltage protection, fence function, log storage function, landing lock function, no-fly zone function, vibration protection function, star protection function, active noise reduction function, motor sequence detection function, direction detection function, dual pump mode, drug break protection function, precision spray, water pump switch control, water pump linkage control\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eHardware Specifications:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003eWeight:\u003cbr\u003e- Total net weight: 321g\u003cbr\u003e- FC: 87g\u003cbr\u003e- PMU: 41g\u003cbr\u003e- PMU2 (UPS): 44g\u003cbr\u003e \u003cbr\u003eSizes:\u003cbr\u003e- FC: 72.6mm x 48.0mm x 22.8mm\u003cbr\u003e- PMU: 53.4mm x 34.4mm x 14.5mm\u003cbr\u003e- PMU2 (UPS): 53.4mm x 34.4mm x 14.5mm\u003cbr\u003e- GPS: 62*14.3mm\u003cbr\u003e- LED: 24*24*8mm\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- 1 x Set of Flight Controller\u003cbr\u003e\u003c\/p\u003e","brand":"Jiyi","offers":[{"title":"Default Title","offer_id":40825838108721,"sku":"67768","price":389.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077207048241_watermarked_0.jpg_0.png?v=1767952424"},{"product_id":"drone-radar-terrain-following-radar-perfect-for-diy-agricultural-plant-protection-spray-drones","title":"Drone Radar Terrain Following Radar Perfect For DIY Agricultural Plant Protection Spray Drones","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Terrain Radar\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: The terrain radar option does not have a HUB module because we will change the connector of the terrain radar so that it can be connected to the flight controller.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825838239793,"sku":"67769","price":294.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077207179313_watermarked_0.jpg_0.png?v=1767952409"},{"product_id":"obstacle-avoidance-radar-with-hub-module-for-diy-agricultural-plant-protection-spray-drones","title":"Obstacle Avoidance Radar with HUB Module For DIY Agricultural Plant Protection Spray Drones","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Obstacle Avoidance Radar with HUB Module\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 563px;\" src=\"https:\/\/www.byimg.com\/catalog\/67770\/67770-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825838338097,"sku":"67770","price":294.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077207244849_watermarked_0.jpg_0.png?v=1767952401"},{"product_id":"happymodel-crazybee-f4-pro-v3-0-2-4s-flight-controller-esc-w-flysky-receiver-for-larva-x-fpv-drone","title":"Happymodel Crazybee F4 Pro V3.0 2-4S Flight Controller ESC w\/ Flysky Receiver for Larva X FPV Drone","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eFlysky Version: \u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003eCrazybee F4FS PRO V3.0 Firmware target\u003cbr\u003eBuilt-in SPI Flysky receiver with telemetry (AFHDS\/AFHDS2A switchable)\u003cbr\u003e\u003cbr\u003eMCU: STM32F411CEU6 (100MHZ, 512K FLASH)\u003cbr\u003eSensor: MPU-6000(SPI connection)\u003cbr\u003eBoard size: 28.5*28.5mm\u003cbr\u003ePower supply: 2-4S battery input (DC 7-17V)\u003cbr\u003eBuilt-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready\u003cbr\u003e\u003cbr\u003eBuilt-in Betaflight OSD(SPI Control)\u003cbr\u003eBuilt-in Current meter Max 70A\u003cbr\u003eCurrent meter scale set to 470\u003cbr\u003eBuilt-in 5V 1A BEC\u003cbr\u003eBuilt-in voltage detection\u003cbr\u003e\u003cbr\u003eMCU upgraded to EFM8BB21\u003cbr\u003ePower supply: 2-4S LiPo\/LiPo HV (7V\/17V)\u003cbr\u003eCurrent: 10A continuous peak 12A (5 seconds)\u003cbr\u003eSupport BLHeliSuite programmable\u003cbr\u003eFactory firmware: F_H_40_REV16_5.HEX\u003cbr\u003eDefault protocol: DSHOT600\u003cbr\u003e\u003cbr\u003eSPI BUS receiver\u003cbr\u003eProtocol: AFHDS and AFHDS-2A Switchable\u003cbr\u003eChannels: 8CH (AFHDS) or 14CH (AFHDS-2A)\u003cbr\u003eNo ground interference ( transmitter and receiver 1 m from the ground): 300m\u003cbr\u003eFailsafe support\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e1 x Flight Controller \u003cbr\u003e1 x Accessories Kit  \u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/68428\/68428-01.jpg\"\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/68428\/68428-02.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Happymodel","offers":[{"title":"Default Title","offer_id":40826053132337,"sku":"68428","price":58.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077262884913_watermarked_0.jpg_0.png?v=1767942193"},{"product_id":"cuav-can-pmu-uavcan-bus-digital-precisely-detect-voltage-current-apm-px4-open-source-for-v5-x7","title":"CUAV CAN PMU\/UAVCAN Bus Digital Precisely Detect Voltage Current APM\/PX4 Open Source For V5\/X7","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eCAN PMU is a UAV power management unit module with built-in STM32F4 processor and running CUAV ITT algorithm. It can accurately measure UAV voltage and current in real time. It can support 6-62V voltage and 110A current at maximum, and can output 5.4V 8A. The flight controller is powered by CAN bus communication and supports the standard UAV CAN protocol. Each PMU unit is factory calibrated to ensure good consistency and high accuracy.\u003cbr\u003e  \u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Digital communication, safe and reliable. CAN PMU adopts standard UAVCAN digital communication protocol. All information is transmitted digitally to avoid error problems caused by traditional ADCs that are easily susceptible to attenuation and interference.\u003cbr\u003e- Accurate power consumption estimates. Internally through real-time sampling of more than 100HZ and real-time statistics of power consumption \/ instantaneous power consumption, pass accurate power consumption information to the flight controller to achieve a safer and controllable flight.\u003cbr\u003e- Low EMI, 5A high current regulated output. Built-in voltage regulator uses LT8645S chip, supports 62V input, 5.4V \/ 5A * synchronous step-down voltage regulator, has ultra-low EMI and EMC, up to 95% conversion efficiency, meets the industry drone flight control peripherals, and power consumption Big application needs. Attention: The maximum instantaneous output circuit is 8A, and the maximum continuous output current is 5A.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-06.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40826343129137,"sku":"69167","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077421547569_watermarked_0.jpg_0.png?v=1767898751"},{"product_id":"hobbywing-xrotor-micro-40a-20x20-6s-4-in-1-esc-amp-fc-f7-flight-controller-combo-for-100-300mm-fpvs","title":"Hobbywing XRotor Micro 40A (20x20) 6S 4 IN 1 ESC and FC F7 Flight Controller Combo For 100-300MM FPVs","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eIntroduction:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e- Product Number: 38040303\u003cbr\u003e- ESC: XRotorMicro40A (20x20) 6S 4in1 ESC\u003cbr\u003e- FC: XRotor Flight Controller F7\u003cbr\u003e- Applications: 100-300mm FPVs\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- 1 x Set of ESC \u0026amp; Flight Controller\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003e\u003cbr\u003eXRotor Micro 40A (20x20) BLHeli_32 4in1 DShot1200:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eOverview:\u003c\/b\u003e\u003cbr\u003eHighly Integrated \u0026amp; Compact\u003cbr\u003eXRotor Micro 40A 4in1 ESC features 32bit MCU and 3rd-generation BLHeli-32 firmware, handles 6S up to 40A per channel. The built-in voltameter module which allows FC to monitor power supply volt \u0026amp; amp in real time. With this 20x20 ESC makes your electronic stack smaller and be able to shave some grams.\u003cbr\u003e \u003cbr\u003eHigh Quality Hardware\u003cbr\u003eHigh performance 32bit for ARM MCU can run at 48MHz.3IN1IC drive. Imported mosfet and ceramic capacitor. 3 ounces of copper, 8 layers. Greatly reduce heat. More efficient.\u003cbr\u003e\u003cbr\u003eBLHeli-32 Firmware Ready\u003cbr\u003eThe ESC flashed with the 3rd-generation BLHeli-32 firmware has great performance \u0026amp; rich functions and supports adjusting parameters or upgrading firmware via different ways (i.e. via throttle signal wire with using other development board or a FC flashed with the firmware for Clean fight\/Beta flight).\u003cbr\u003e\u003cbr\u003eUnique Soft Mount\u003cbr\u003eThe soft mounts prevent vibrations from being transferred to the FC. Soft wiring and welder pads for the best possible connection.\u003cbr\u003e\u003cbr\u003eDShot1200 Ready\u003cbr\u003eBesides the regular PWM mode, Oneshot125\/Oneshot42\/Multishot modes, DShot150\/300\/600 modes, the latest DShot1200 mode is also supported. In DShot1200mode, the ESC has great anti-interference performance and rapid response.\u003cbr\u003e\u003cbr\u003eHardware Generated PWM\u0026amp; Damped Light Mode\u003cbr\u003eThe ESC firmware uses hardware generated motor pwm for smooth throttle response and silent operation. Damped light does regenerative breaking, causing very fast motor retardation, and it inherently also does active freewheeling.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Product Name: XRotor Micro 40A (20x20) BLHeli_32 4in1 DShot1200\u003cbr\u003e- Product Number: 30902045\u003cbr\u003e- Cont.\/Peak Current: 40Ax4\/60Ax4\u003cbr\u003e- Input Voltage: 3-6S Lipo\u003cbr\u003e- BEC output: NO\u003cbr\u003e\u003cbr\u003eWires \u0026amp; Connectors:\u003cbr\u003e- Input Wires: Red-14AWG-100mm\/Black-14AWG-100mm\u003cbr\u003e- Output Wires: No wires but solder tabs\u003cbr\u003e- Input Connectors: XT60 plug enclosed with package\u003cbr\u003e- Output Connectors: No\u003cbr\u003e- Note: All the wire length above is the original length not the length you see from the outside\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- Firmware: Hobbywing_X Rotor_BLHeli-32 Version\u003cbr\u003e- ESC Programming: BLHeliSuite32\u003cbr\u003e- Stick Programming: Supported\u003cbr\u003e- DEO: Supported\u003cbr\u003e- Throttle Range Calibration: Supported\u003cbr\u003e- Oneshot125Mode: Supported\u003cbr\u003e- Oneshot42 Mode: Supported\u003cbr\u003e- MultiShot Mode: Supported\u003cbr\u003e- DShot150\/300\/600\/1200: Supported\u003cbr\u003e- Timing: Supported\u003cbr\u003e- Motor Rotation: Supported\u003cbr\u003e\u003cbr\u003eSize \u0026amp; Weight:\u003cbr\u003e- Size: 40x33x5mm\u003cbr\u003e- Weight: 12g\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eXRotor Flight Controller F7:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eOverview:\u003c\/b\u003e\u003cbr\u003eSuper hardware and running speed\u003cbr\u003eEquipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.\u003cbr\u003e\u003cbr\u003eSpecial interface for DJI image transmission system\u003cbr\u003eWith image transmission system port for DJl, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.\u003cbr\u003e\u003cbr\u003eOn-board 5V \u0026amp; 12Vdual BEC circuit\u003cbr\u003eFMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.\u003cbr\u003e\u003cbr\u003eOn-board Pit Switch module\u003cbr\u003eFC integrated Pit Switch module can open or close VTx by radio after being adjusted on FC parameter software. Easy and convenient.\u003cbr\u003e \u003cbr\u003ePerfectly support firmware of various FPV\u003cbr\u003eIt support the firmware for BetaFlight, Cleanflight, Butterlight, inva and other mainstream FPV, and can use corresponding parameter adjustment software to adjust various parameters, making the FC more suitable for various FPV flight and race.\u003cbr\u003e\u003cbr\u003eUnique installation design and shock absorption structure\u003cbr\u003eThe double hole distance mounting hole design (30*30MM \u0026amp; 20*20MM) can adapt to different frames. The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC), and the shock absorption mechanism of instillation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate.\u003cbr\u003e\u003cbr\u003ePerfectly match with Hobbywing\u003cbr\u003eMatch with Hobbywing tower 4in1 ESC, easy to install and wire. The appearance is more beautiful.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Product Name: XRotor Flight Controller F7\u003cbr\u003e- Product Number: 31003002\u003cbr\u003e\u003cbr\u003eBasic Features:\u003cbr\u003e- Compatible with (Multirotors): Quadcopters\u003cbr\u003e- Firmware: HOBBYWING_XROTORF7CONV\u003cbr\u003e- FC Programming: Supported\u003cbr\u003e- Programming via: For Betaflight\/Cleanflight-configurator\u003cbr\u003e- Compatible with (Modes): PWM, Oneshot 125, Oneshot 42, Multishot, Dshot150, Dshot300, Dshot600, PROSHOT1000\u003cbr\u003e- Compatible with (Transmitters): For PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL\u003cbr\u003e- OSD: Built-in\u003cbr\u003e- Voltage Monitoring: Supported\u003cbr\u003e- Current Monitoring: Supported\u003cbr\u003e- External Buzzer: Supported\u003cbr\u003e- LED Control: Supported\u003cbr\u003e- BEC: 5V at 1.5A; 10V at 1.5A\u003cbr\u003e- USB Port: Micro USB\u003cbr\u003e\u003cbr\u003eSize \u0026amp; Weight:\u003cbr\u003e- Size: 32x32mm\u003cbr\u003e- Weight: 3.3g\u003cbr\u003e\u003c\/p\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":40826344341553,"sku":"71790","price":72.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077422759985_watermarked_0.jpg_0.png?v=1767898205"},{"product_id":"happymodel-elrsf4-2g4-aio-5-in-1-flight-control-built-in-spi-2-4ghz-elrs-drone-receiver-kit","title":"Happymodel ELRSF4 2G4 AIO 5-In-1 Flight Control Built-in SPI 2.4GHz ELRS Drone Receiver Kit","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe world’s first AIO 5in1 F4 flight controller with integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrates SPI controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter and OSD for Betaflight. Ultra-small size and ultra-stable remote control range can improve the range of the original SPI receiver. And because the 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency, this flight controller is the one that all Race\/Freestyle pilots needed. It is suitable for use in Tiny whoop Race or Toothpick Freestyle, and can also be used in 1S ultra-lightweight Nano Long Range platform.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cu\u003eFlight Controller:\u003c\/u\u003e\u003cbr\u003e- MCU: STM32F411CEU6 (100MHZ, 512K FLASH)\u003cbr\u003e- Sensor: MPU-6000 (SPI connection)\u003cbr\u003e- Original whoop size compatible\u003cbr\u003e- Power supply: 1S battery input (DC 2.9V-4.35V)\u003cbr\u003e- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready\u003cbr\u003e- Built-in Betaflight OSD (SPI Control)\u003cbr\u003e- Built-in 5.8G VTX\u003cbr\u003e- Built-in SPI ExpressLRS 2.4GHz receiver\u003cbr\u003e- Built-in 5V 1A BECFlight controller firmware target: CRAZYBEEF4SX1280\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard 4in1 ESC:\u003c\/u\u003e\u003cbr\u003e- MCU upgraded to EFM8BB21\u003cbr\u003e- Power supply: 1S LiPo\/LiPo HV Current: 5A continuous peak 6A (3 seconds)\u003cbr\u003e- Support programmable\u003cbr\u003e- Factory firmware: O_H_5_REV16_8.HEX\u003cbr\u003e- Default protocol: DSHOT600\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard SPI ExpressLRS 2.4GHz Receiver:\u003c\/u\u003e\u003cbr\u003e- Packet Rate option: 25Hz\/50Hz\/150Hz\/250Hz\/500Hz\u003cbr\u003e- RF Frequency: 2.4GHzAntenna: SMD antenna\u003cbr\u003e- Telemetry output Power: \u0026lt;12dBmReceiver protocol: SPI ExpressLRS could bind with Happymodel ES24TX, ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module (need to flash the same version ELRS firmware)\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard 5.8g VTX:\u003c\/u\u003e\u003cbr\u003e- Output power: 25mw~200mw switchable\u003cbr\u003e- Frequency: 40CH\u003cbr\u003e- Input voltage: 3.3V 5.5V\u003cbr\u003e- Current consumption: 300mA(type)\u003cbr\u003e- Frequency: 5.8GHz 5bands 40 channels (include Race band) Smartaudio ready\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard voltage and Amperage meters settings:\u003c\/u\u003e\u003cbr\u003e- Voltage meter scale setting 110\u003cbr\u003e- Amperage meter scale setting 1175\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Receiver\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Batteries are not included.\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eBind Procedure:\u003c\/b\u003e\u003cbr\u003e1. Power the flight controller by connecting USB. Please make sure that the port driver of the flight controller is correctly installed on the computer, then open Betaflight Configurator(Latest version) to connect, enter to the “receiver” interface, and then click “Bind Receiver”, the red LED at the bottom of the flight controller will flash quickly, which means that the SPI ELRS receiver enters the bind mode. There is another way to make the receiver enter the bind mode: after connecting to the Betaflight configurator, move to the CLI interface and enter “bind_rx” in the command line.\u003cbr\u003e2. After correctly connecting the ES24TX or ES24TX Lite\/Slim module or DIY 2.4G ELRS TX module to your Opentx radio transmitter, copy the latest version of ELRS.LUA file to the SD card in the remote controller. The directory is “SD Card\/Scripts\/tools”, Then run ELRS.LUA and upgrade the specified TX firmware through Wifi, and then click “bind” to link with the SPI ExpressLRS receiver.  The Red LED will blinking slowly, this means the bind is successfully. Note: You need to adjust the Packet Rate to 500Hz from the ELRS interface of your radio controller before binding.\u003cbr\u003e3. After the binding is successful, please re-power for the radio transmitter and then the Red LED at the bottom of the flight controller will getting to be solid, and the telemetry can be received at the same time.\u003cbr\u003e4. The meaning of the LED status of the SPI receiver: the LED is getting to be solid, indicating that the bind is successful or the connection and communication is normal, the LED flashing quickly indicates that the receiver is in binding mode, and the LED flashing slowly indicates that the there is no signal received from the radio controller.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDownload Some Useful Firmware and Tools:\u003cbr\u003e\u003c\/b\u003e\u003ca href=\"http:\/\/www.happymodel.cn\/index.php\/2021\/05\/18\/betaflight-firmware-diff-document-elrs-lua-es24tx-firmware-for-happymodel-elrs-f4-2g4\/\"\u003ehttp:\/\/www.happymodel.cn\/index.php\/2021\/05\/18\/betaflight-firmware-diff-document-elrs-lua-es24tx-firmware-for-happymodel-elrs-f4-2g4\/\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNotes: For Betaflight has not yet released the official firmware that could supports the SPI Expresslrs protocol, the current version is the Beta version(Target: CrazybeeF4SX1280). For Betaflight will update to their official target soon. Please feel free to contact with us if you have any issues with this Beta version Firmware.\u003cbr\u003e\u003cbr\u003ePlease change the \"PID loop frequency\" to \"4KHZ\" , sometimes it would make the SPI receiver not working correct while the value is \"8KHZ\".\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cimg style=\"width: 339px;\" src=\"https:\/\/www.byimg.com\/catalog\/71792\/71794-01.png\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eIf find buzzer is not working , please go to CLI command and enter the following code\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003eset beeper_inversion = ON\u003cbr\u003eset beeper_od = OFF\u003cbr\u003esave\u003cbr\u003e\u003c\/p\u003e","brand":"Happymodel","offers":[{"title":"Default Title","offer_id":40826344505393,"sku":"71794","price":62.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077422923825_watermarked_0.jpg_0.png?v=1767898140"},{"product_id":"grtk-rtk-full-kit-multi-satellite-multi-frequency-gps-centimeter-level-positioning-for-uav-pixhawk","title":"GRTK RTK Full Kit Multi-Satellite Multi-frequency GPS Centimeter-Level Positioning For UAV Pixhawk","description":"\u003cp\u003e\u003cb\u003eGRTK Automatic Route Accuracy Test:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.bilibili.com\/video\/BV1cK4y1R71z\"\u003ehttps:\/\/www.bilibili.com\/video\/BV1cK4y1R71z\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.bilibili.com\/video\/BV1f44y167TB\"\u003ehttps:\/\/www.bilibili.com\/video\/BV1f44y167TB\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eGRTK Static Accuracy Test:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.bilibili.com\/video\/BV1iV411j7M8\"\u003ehttps:\/\/www.bilibili.com\/video\/BV1iV411j7M8\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Parameters:\u003c\/b\u003e\u003cbr\u003e- Frequency: BDS B1L\/B2L; GPS L1\/L2; GLONASS L1\/L2; Galileo E1\/E5b; QZSS L1\/L2\u003cbr\u003e- Single Point Positioning (RMS): Plane: 1.5m; Elevation: 2.5m\u003cbr\u003e- RTK (RMS): Plane: 1cm+1ppm; Elevation: 1.5cm+1ppm\u003cbr\u003e- Orientation accuracy (RMS): 0.2 degree\/1m baseline\u003cbr\u003e- Input voltage: 7V-60V\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003eMobile End:\u003cbr\u003e- 1 x G-RTK\u003cbr\u003e- 2 x Multi-satellite multi-frequency spiral antennas\u003cbr\u003e- Several cables\u003cbr\u003e\u003cbr\u003eBase Station:\u003cbr\u003e- 1 x G-RTK\u003cbr\u003e- 1 x Multi-satellite multi-frequency spiral antenna\u003cbr\u003e- Several cables\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826363871281,"sku":"71940","price":1047.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077431902257_watermarked_0.jpg_0.png?v=1767894853"},{"product_id":"30m-98-4ft-gps-antenna-cable-timing-antenna-clock-antenna-for-ntp-server-gps-beidou-ii-glonass","title":"30M\/98.4FT GPS Antenna Cable Timing Antenna Clock Antenna For NTP Server GPS Beidou II GLONASS","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e30M\/98.4FT antenna can be connected to clocks and other devices that require GPS signals to provide high-quality GPS signals.\u003cbr\u003e\u003cbr\u003eThe cable length can be extended to more than 100m\/328.1ft. A cable amplifier can be added when cable length exceeds 50m\/164ft.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Frequency Range: \u003cbr\u003e* 1575±5MHz (GPS)\u003cbr\u003e* 1561±4MHz (for Beidou II)\u003cbr\u003e* 1609±8MHz (GLONASS)\u003cbr\u003e- Polarization method: Right-hand circular polarization\u003cbr\u003e- Antenna gain: ≥3.5dB\u003cbr\u003e- Amplifier gain: ≥37dB\u003cbr\u003e- Noise figure: ≤1.5dB\u003cbr\u003e- Reflection loss: -14dB (i.e. standing wave ratio≤1.5)\u003cbr\u003e- P-1: ≥ 10dBm\u003cbr\u003e- Interference suppression: ≥25dB (f0±100MHz)\u003cbr\u003e- Power supply: 3V\/5V DC\u003cbr\u003e- Connector: N type (female) or BNC; SYV-50-3 cable 30m or optional\u003cbr\u003e- Installation method: threaded (M24×1.5) connection\u003cbr\u003e- Volume: Diameter 96 × 126mm\/3.8 x 5\"\u003cbr\u003e- Working temperature: -45℃ to 85℃\u003cbr\u003e- Storage temperature: -50℃ to 90℃\u003cbr\u003e- Humidity: 100%\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Antenna\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826406240305,"sku":"69346","price":65.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077451497521_watermarked_0.jpg_0.png?v=1767888188"},{"product_id":"spiral-antenna-gps-antenna-sma-male-connector-1-4-1-68ghz-perfect-for-satellite-positioning-systems","title":"Spiral Antenna GPS Antenna SMA Male Connector 1.4-1.68GHz Perfect For Satellite Positioning Systems","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eFour-arm spiral structure antenna. It consists of four spiral arms, each of which is an integer multiple of a quarter wavelength. The current amplitudes at the feed ends of the four spiral arms are equal, and phases are sequentially different by 90°. It has a cardioid pattern, good front-to-rear ratio and excellent wide-beam circular polarization characteristics, and is very suitable for use as a receiving antenna for satellite positioning systems.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Application:\u003c\/b\u003e\u003cbr\u003e- Aerospace, meteorology, positioning, relay and the like.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAntenna Parameters:\u003c\/b\u003e\u003cbr\u003e- Antenna impedance: 50 ohms\u003cbr\u003e- Working frequency band: 1.4-1.68GHz\u003cbr\u003e- Size: 23 x 78 x 1.6mm\/0.9 x 3.1 x 0.06\"\u003cbr\u003e- Product weight: 8.4g\/0.02LB\u003cbr\u003e- Antenna connector: SMA (male)\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Antenna\u003cbr\u003e\u003cbr\u003e\u003cb\u003eS11 Measured Picture:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 640px;\" src=\"https:\/\/www.byimg.com\/catalog\/69488\/69488-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826491535409,"sku":"69488","price":21.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077493211185_watermarked_0.jpg_0.png?v=1767880208"},{"product_id":"mateksys-3901-lox-optical-flow-lidar-sensor-for-f4-f7-flight-controller-fixed-height-hovering-flight","title":"MATEKSYS 3901-LOX Optical Flow Lidar Sensor For F4 F7 Flight Controller Fixed Height Hovering Flight","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- MATEK fixed height special accessories\u003cbr\u003e- With this accessory, stable altitude and hovering flight can be achieved\u003cbr\u003e- The sensor is mini and compact, saving space. Not increase flight weight\u003cbr\u003e- Simple wiring, simple setting, only need to connect TX\/RX\/5V\/GND\u003cbr\u003e- Only support F4 and F7 flight controller for INAV firmware. And the flight controller must have a spare UART port\u003cbr\u003e- Before starting the flight control, make sure that the distance between the sensor and the ground is greater than 2CM\/0.8\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Optical meter: PMW3901\u003cbr\u003e- Lidar: VL53L0X\u003cbr\u003e- Interface: UART\u003cbr\u003e- Protocol: for INAV MSP\u003cbr\u003e- Working range: 8cm-200cm\/3.1-78.7\"\u003cbr\u003e- Field of view: 42 degrees (PMW3901), 27 degrees (VL53L0X)\u003cbr\u003e- Minimum illumination: \u0026gt; 60Lux\u003cbr\u003e- Input voltage: 4.5~5.5v\u003cbr\u003e- Power consumption: 40ma\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Optical Flow Lidar Sensor\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-04.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"MATEKSYS","offers":[{"title":"Default Title","offer_id":40826601865265,"sku":"72882","price":33.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077536858161_watermarked_0.jpg_0.png?v=1767873916"},{"product_id":"neo-m8n-gps-beidou-glonass-dual-mode-gps-module-satellite-positioning-module-with-sma-connector","title":"NEO-M8N GPS\/Beidou\/GLONASS\/Dual-Mode GPS Module Satellite Positioning Module with SMA Connector","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Default output baud rate: 9600 (can be modified through U-CENTER)\u003cbr\u003e- Default output frequency: 1HZ (can be modified through U-CENTER)\u003cbr\u003e- Output protocol: NMEA-0183\u003cbr\u003e- Output level: serial communication TTL level\u003cbr\u003e- Support satellites: GPS, Beidou, GLONASS\u003cbr\u003e- Can be set to use GPS+ Beidou satellites (the default is a combination of GPS+GLONASS satellites, or a combination of GPS+GLONASS satellites)\u003cbr\u003e- Comes with IPEX and SMA antenna interfaces, which can be connected to various active antennas\u003cbr\u003e- Comes with EEPROM, can save configuration information\u003cbr\u003e- Rechargeable backup battery can temporarily maintain ephemeris data when power is off, and increase the speed of hot start positioning\u003cbr\u003e- Compatible with 5V\/3.3V voltage, adapt to all kinds of MCU\u003cbr\u003e- With EEPROM and backup battery, satellite searching module\u003cbr\u003e- Support China: Beidou Satellite\u003cbr\u003e- Support the United States: GPS satellites\u003cbr\u003e- Support Russia: GLO NSAA satellite\u003cbr\u003e- Board size: 23 x 17MM\/0.9 x 0.7\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x NEO-M8N Module\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826647511089,"sku":"73346","price":15.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077570838577_watermarked_0.jpg_0.png?v=1767863547"},{"product_id":"m8n-gps-flight-controller-for-pixhawk-2-4-8-standard-ammeter-damping-plate-gps-bracket","title":"M8N GPS + Flight Controller For Pixhawk 2.4.8 Standard + Ammeter + Damping Plate + GPS Bracket","description":"\u003cp\u003e\u003cb\u003eRead Before Purchasing:\u003c\/b\u003e\u003cbr\u003e- If the flight controller needs to automatically return to the origin and land at low voltage, it needs to be equipped with an ammeter (packages with ammeters can be purchased)\u003cbr\u003e- The damping plate is used for flight control and damping. Increase the stability, make the fixed height more stable, filter the vibration of the body\u003cbr\u003e- The bracket is a GPS support bracket, foldable, supports GPS fixation, and avoids interference by the body circuit\u003cbr\u003e- PPM decoder board: when some remote controllers do not support PPM or SBUS, PPM decoder board is needed to convert ordinary receivers into PPM\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlight Controller For PIXHAWK 2.4.8:\u003c\/b\u003e\u003cbr\u003eIt adopts a flight controller for PIXHAWK 2.4.8. It is a new generation of flight control system. Its predecessor is APM flight control. As the processor of APM flight control is close to full load, there is no way to meet more complex calculation processing, so the hardware manufacturer uses the current 32-bit processor with high performance. All hardware of flight control for PIXHAWK is transparent and open source. All its buses and peripherals are derived, which can not only be compatible with some peripherals, but also provide convenience for users for further development. For PIXHAWK is a dual-processor flight controller, a 32-bit STM32F427 for Cortex M4 core 168MHz\/256KBRAM\/2MB Flash processor is good at powerful computing. And a 32bit STM32F 103 co-processor is mainly targeted for industrial use. Its characteristic is safety and stability. So even if the main processor crashes, there is a co-processor to ensure safety.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Version for Pixhawk 2.4.8 Flight Controller:\u003c\/b\u003e\u003cbr\u003eIncluding a flight controller for Pixhawk 2.4.8, a safety switch, a buzzer, a set of I2C expansion board, a set of PPM decoder board, a card reader and sandwich rubber.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eImported M8N GPS Module:\u003c\/b\u003e\u003cbr\u003e- Original GPS module\u003cbr\u003e- To ensure stable power supply for GPS and compass, we use MIC5219 power supply module with a maximum current of 500MA\u003cbr\u003e- Use original HMC5883 electronic compass\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Details:\u003c\/b\u003e\u003cbr\u003eProcessor:\u003cbr\u003e- Main processor: 32-bit STM32F427 for Cortex M4 core and FPU 168MHz \/ 256KB RAM \/ 2MB flash memory\u003cbr\u003e- Coprocessor: 32-bit STM32F103 fail-safe coprocessor\u003cbr\u003e\u003cbr\u003eSensor:\u003cbr\u003e- For ST Micro L3GD20 3-axis 16-bit gyroscope\u003cbr\u003e- For ST Micro LSM303D 3-axis 14-bit accelerometer\/magnetometer\u003cbr\u003e- For Invensense MPU 6000 3-axis accelerometer\/gyro\u003cbr\u003e- For MEAS MS5611 Barometer\u003cbr\u003e\u003cbr\u003eInterfaces:\u003cbr\u003e- 5 UARTs (serial ports), one high power, 2 hardware flow control\u003cbr\u003e- 2xCAN\u003cbr\u003e- Support for Spektrum DSM\/DSM2\/DSM-X Satellite and DX8 compatible input (DX9 and later versions are not supported)\u003cbr\u003e- Support S.BUS input and output\u003cbr\u003e- Support PPM input\u003cbr\u003e- Support RSSI (PWM or voltage) input\u003cbr\u003e- Support I2C\u003cbr\u003e- Support SPI\u003cbr\u003e- 3.3 and 6.6V ADC input\u003cbr\u003e- External microUSB port\u003cbr\u003e\u003cbr\u003ePower Systems:\u003cbr\u003e- Automatic diode control after power failure (uninterrupted power supply)\u003cbr\u003e- Support maximum 10V servo power supply and maximum 10A power consumption\u003cbr\u003e- All peripheral outputs are protected against overcurrent\u003cbr\u003e- All inputs are ESD protected\u003cbr\u003e\u003cbr\u003eGround Station:\u003cbr\u003e- For QGroundControl, MissionPlanner\u003cbr\u003e\u003cbr\u003eFirmware:\u003cbr\u003e- Support for PX4 and Ardupilot firmware for V, 2V3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e1. Advanced 32-bit high-performance processor for ARM cortex M4, which can run RTOS real-time operating system for Nuttx\u003cbr\u003e2. 14pcs PWM\/Servo output\u003cbr\u003e3. Bus interface (UART, I2C, SPI, CAN)\u003cbr\u003e4. Integrated backup power supply and failed backup controller, which can safely switch to the backup controller when the main controller fails\u003cbr\u003e5. Provide automatic and manual modes\u003cbr\u003e6. Provide redundant power input and failover function\u003cbr\u003e7. Multi-color LED lights\u003cbr\u003e8. Provide multi-tone buzzer interface\u003cbr\u003e9. Micro SD records flight data, (trajectory, sensor, position, altitude, power and all other data)\u003cbr\u003e10. Support optical flow sensor, perfect indoor fixed height and fixed point\u003cbr\u003e11. Support ultrasonic. Ultra-low altitude can not drop high, ultrasonic multi-faceted obstacle avoidance\u003cbr\u003e12. It can be installed with dual GPS to realize ultra-high-precision satellite positioning, and it can also support RTK differential positioning\u003cbr\u003e13. Support more than a dozen flight modes such as one-key return home, automatic cruise, automatic waypoint flight, fixed-point hover, fixed height, automatic landing, follow, self-stabilization, automatic circle, etc.\u003cbr\u003e14. Can flash the original PIX firmware (PX4) and firmware for Ardupilot (APM), support vertical take-off and landing, two-axis, etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage 1:\u003c\/b\u003e\u003cbr\u003e- 1 x For Pixhawk 2.4.8 Light Controller\u003cbr\u003e- 1 x M8N GPS\u003cbr\u003e- 1 x Safety Switch\u003cbr\u003e- 1 x I2C Extension Board\u003cbr\u003e- 1 x PPM Decoder Board\u003cbr\u003e- 1 x Card Reader\u003cbr\u003e- 1 x Ammeter\u003cbr\u003e- 1 x Buzzer\u003cbr\u003e- 1 x Mounting Bracket\u003cbr\u003e- 1 x Shocker Absorber\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003e\u003cb\u003eNote:\u003cbr\u003e- The ammeter is designed with T plug by default. If you need other plugs, please leave a note when purchasing.\u003cbr\u003e- SD card is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003eQ: What model does the flight control for Pixhawk support? What remote control is compatible?\u003cbr\u003eA: Support almost all aircraft models, car models, boat models, underwater robots, etc. on the market. Supports for RadioLink, WFLY, Futaba, FLYSKY, MC, Walkera, Siyi, Skydroid, JR etc. more than 5 channels remote control\u003cbr\u003e\u003cbr\u003eQ: How to power the flight controller?\u003cbr\u003eA: You can purchase the version with an ammeter. Use the ammeter for power supply, or 5V voltage stabilizer module BEC power supply, or power supply with BEC ESC.\u003cbr\u003e\u003cbr\u003eQ: Do GPS and flight controllers have their own compasses?\u003cbr\u003eA: Both GPS and flight control have their own compasses, and they are used as dual compasses when in use.\u003cbr\u003e\u003cbr\u003eQ: Can the flight control be re-developed?\u003cbr\u003eA: For Pixhawk is an open source flight controller, it can be re-developed. After purchase, source code, environment establishment and other open source materials will be provided.\u003cbr\u003e\u003cbr\u003eQ: Flight controller for Pixhawk VS APM flight controller\u003cbr\u003eA: The flight control for Pixhawk is more stable and accurate, and can operate more efficiently. APM flight control is cost-effective.\u003cbr\u003e\u003cbr\u003eQ: Does the flight controller provide technical support? Is there a tutorial?\u003cbr\u003eA: We provide powerful technical support services, provide a full set of PIX debugging and installation video tutorials, easy to complete the debugging.\u003cbr\u003e\u003cbr\u003eQ: How to achieve indoor fixed-point hovering? Does it support obstacle avoidance?\u003cbr\u003eA: The indoor fixed point needs to be equipped with an optical flow sensor (be purchased separately), the fixed point and height can be realized indoors, and an ultrasonic module (be purchased separately) can support obstacle avoidance.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-05.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pixhawk","offers":[{"title":"Default Title","offer_id":40826652950577,"sku":"73409","price":167.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077575196721_watermarked_0.jpg_0.png?v=1767862127"},{"product_id":"m8n-gps-flight-controller-simple-version-for-pixhawk-2-4-8-ammeter-damping-plate-gps-bracket","title":"M8N GPS + Flight Controller Simple Version For Pixhawk 2.4.8 + Ammeter + Damping Plate + GPS Bracket","description":"\u003cp\u003e\u003cb\u003eRead Before Purchasing:\u003c\/b\u003e\u003cbr\u003e- If the flight controller needs to automatically return to the origin and land at low voltage, it needs to be equipped with an ammeter (packages with ammeters can be purchased)\u003cbr\u003e- The damping plate is used for flight control and damping. Increase the stability, make the fixed height more stable, filter the vibration of the body\u003cbr\u003e- The bracket is a GPS support bracket, foldable, supports GPS fixation, and avoids interference by the body circuit\u003cbr\u003e- PPM decoder board: when some remote controllers do not support PPM or SBUS, PPM decoder board is needed to convert ordinary receivers into PPM\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlight Controller For PIXHAWK 2.4.8:\u003c\/b\u003e\u003cbr\u003eIt adopts a flight controller for PIXHAWK 2.4.8. It is a new generation of flight control system. Its predecessor is APM flight control. As the processor of APM flight control is close to full load, there is no way to meet more complex calculation processing, so the hardware manufacturer uses the current 32-bit processor with high performance. All hardware of flight control for PIXHAWK is transparent and open source. All its buses and peripherals are derived, which can not only be compatible with some peripherals, but also provide convenience for users for further development. For PIXHAWK is a dual-processor flight controller, a 32-bit STM32F427 for Cortex M4 core 168MHz\/256KBRAM\/2MB Flash processor is good at powerful computing. And a 32bit STM32F 103 co-processor is mainly targeted for industrial use. Its characteristic is safety and stability. So even if the main processor crashes, there is a co-processor to ensure safety.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSimple Version for Pixhawk 2.4.8 Flight Controller:\u003c\/b\u003e\u003cbr\u003eIncluding a flight controller for Pixhawk 2.4.8, a safety switch, a buzzer, a set of I2C expansion board, and sandwich rubber.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eImported M8N GPS Module:\u003c\/b\u003e\u003cbr\u003e- Original GPS module\u003cbr\u003e- To ensure stable power supply for GPS and compass, we use MIC5219 power supply module with a maximum current of 500MA\u003cbr\u003e- Use original HMC5883 electronic compass\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Details:\u003c\/b\u003e\u003cbr\u003eProcessor:\u003cbr\u003e- Main processor: 32-bit STM32F427 for Cortex M4 core and FPU 168MHz \/ 256KB RAM \/ 2MB flash memory\u003cbr\u003e- Coprocessor: 32-bit STM32F103 fail-safe coprocessor\u003cbr\u003e\u003cbr\u003eSensor:\u003cbr\u003e- For ST Micro L3GD20 3-axis 16-bit gyroscope\u003cbr\u003e- For ST Micro LSM303D 3-axis 14-bit accelerometer\/magnetometer\u003cbr\u003e- For Invensense MPU 6000 3-axis accelerometer\/gyro\u003cbr\u003e- For MEAS MS5611 Barometer\u003cbr\u003e\u003cbr\u003eInterfaces:\u003cbr\u003e- 5 UARTs (serial ports), one high power, 2 hardware flow control\u003cbr\u003e- 2xCAN\u003cbr\u003e- Support for Spektrum DSM\/DSM2\/DSM-X Satellite and DX8 compatible input (DX9 and later versions are not supported)\u003cbr\u003e- Support S.BUS input and output\u003cbr\u003e- Support PPM input\u003cbr\u003e- Support RSSI (PWM or voltage) input\u003cbr\u003e- Support I2C\u003cbr\u003e- Support SPI\u003cbr\u003e- 3.3 and 6.6V ADC input\u003cbr\u003e- External microUSB port\u003cbr\u003e\u003cbr\u003ePower Systems:\u003cbr\u003e- Automatic diode control after power failure (uninterrupted power supply)\u003cbr\u003e- Support maximum 10V servo power supply and maximum 10A power consumption\u003cbr\u003e- All peripheral outputs are protected against overcurrent\u003cbr\u003e- All inputs are ESD protected\u003cbr\u003e\u003cbr\u003eGround Station:\u003cbr\u003e- For QGroundControl, MissionPlanner\u003cbr\u003e\u003cbr\u003eFirmware:\u003cbr\u003e- Support for PX4 and Ardupilot firmware for V, 2V3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e1. Advanced 32-bit high-performance processor for ARM cortex M4, which can run RTOS real-time operating system for Nuttx\u003cbr\u003e2. 14pcs PWM\/Servo output\u003cbr\u003e3. Bus interface (UART, I2C, SPI, CAN)\u003cbr\u003e4. Integrated backup power supply and failed backup controller, which can safely switch to the backup controller when the main controller fails\u003cbr\u003e5. Provide automatic and manual modes\u003cbr\u003e6. Provide redundant power input and failover function\u003cbr\u003e7. Multi-color LED lights\u003cbr\u003e8. Provide multi-tone buzzer interface\u003cbr\u003e9. Micro SD records flight data, (trajectory, sensor, position, altitude, power and all other data)\u003cbr\u003e10. Support optical flow sensor, perfect indoor fixed height and fixed point\u003cbr\u003e11. Support ultrasonic. Ultra-low altitude can not drop high, ultrasonic multi-faceted obstacle avoidance\u003cbr\u003e12. It can be installed with dual GPS to realize ultra-high-precision satellite positioning, and it can also support RTK differential positioning\u003cbr\u003e13. Support more than a dozen flight modes such as one-key return home, automatic cruise, automatic waypoint flight, fixed-point hover, fixed height, automatic landing, follow, self-stabilization, automatic circle, etc.\u003cbr\u003e14. Can flash the original PIX firmware (PX4) and firmware for Ardupilot (APM), support vertical take-off and landing, two-axis, etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage 2:\u003c\/b\u003e\u003cbr\u003e- 1 x For Pixhawk 2.4.8 Light Controller\u003cbr\u003e- 1 x M8N GPS\u003cbr\u003e- 1 x Safety Switch\u003cbr\u003e- 1 x I2C Extension Board\u003cbr\u003e- 1 x Ammeter\u003cbr\u003e- 1 x Buzzer\u003cbr\u003e- 1 x Mounting Bracket\u003cbr\u003e- 1 x Shocker Absorber\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote:\u003cbr\u003e- The ammeter is designed with T plug by default. If you need other plugs, please leave a note when purchasing.\u003cbr\u003e- SD card is not included in the package.\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003eQ: What model does the flight control for Pixhawk support? What remote control is compatible?\u003cbr\u003eA: Support almost all aircraft models, car models, boat models, underwater robots, etc. on the market. Supports for RadioLink, WFLY, Futaba, FLYSKY, MC, Walkera, Siyi, Skydroid, JR etc. more than 5 channels remote control\u003cbr\u003e\u003cbr\u003eQ: How to power the flight controller?\u003cbr\u003eA: You can purchase the version with an ammeter. Use the ammeter for power supply, or 5V voltage stabilizer module BEC power supply, or power supply with BEC ESC.\u003cbr\u003e\u003cbr\u003eQ: Do GPS and flight controllers have their own compasses?\u003cbr\u003eA: Both GPS and flight control have their own compasses, and they are used as dual compasses when in use.\u003cbr\u003e\u003cbr\u003eQ: Can the flight control be re-developed?\u003cbr\u003eA: For Pixhawk is an open source flight controller, it can be re-developed. After purchase, source code, environment establishment and other open source materials will be provided.\u003cbr\u003e\u003cbr\u003eQ: Flight controller for Pixhawk VS APM flight controller\u003cbr\u003eA: The flight control for Pixhawk is more stable and accurate, and can operate more efficiently. APM flight control is cost-effective.\u003cbr\u003e\u003cbr\u003eQ: Does the flight controller provide technical support? Is there a tutorial?\u003cbr\u003eA: We provide powerful technical support services, provide a full set of PIX debugging and installation video tutorials, easy to complete the debugging.\u003cbr\u003e\u003cbr\u003eQ: How to achieve indoor fixed-point hovering? Does it support obstacle avoidance?\u003cbr\u003eA: The indoor fixed point needs to be equipped with an optical flow sensor (be purchased separately), the fixed point and height can be realized indoors, and an ultrasonic module (be purchased separately) can support obstacle avoidance.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-05.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pixhawk","offers":[{"title":"Default Title","offer_id":40826652983345,"sku":"73410","price":149.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077575229489_watermarked_0.jpg_0.png?v=1767862107"},{"product_id":"flight-controller-for-pixhawk-2-4-8-simple-version-without-gps-suitable-for-4-axis-multi-rotor-drones","title":"Flight Controller For Pixhawk 2.4.8 Simple Version Without GPS Suitable For 4-Axis Multi-Rotor Drones","description":"\u003cp\u003e\u003cb\u003eRead Before Purchasing:\u003c\/b\u003e\u003cbr\u003e- If the flight controller needs to automatically return to the origin and land at low voltage, it needs to be equipped with an ammeter (packages with ammeters can be purchased)\u003cbr\u003e- The damping plate is used for flight control and damping. Increase the stability, make the fixed height more stable, filter the vibration of the body\u003cbr\u003e- The bracket is a GPS support bracket, foldable, supports GPS fixation, and avoids interference by the body circuit\u003cbr\u003e- PPM decoder board: when some remote controllers do not support PPM or SBUS, PPM decoder board is needed to convert ordinary receivers into PPM\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlight Controller For PIXHAWK 2.4.8:\u003c\/b\u003e\u003cbr\u003eIt adopts a flight controller for PIXHAWK 2.4.8. It is a new generation of flight control system. Its predecessor is APM flight control. As the processor of APM flight control is close to full load, there is no way to meet more complex calculation processing, so the hardware manufacturer uses the current 32-bit processor with high performance. All hardware of flight control for PIXHAWK is transparent and open source. All its buses and peripherals are derived, which can not only be compatible with some peripherals, but also provide convenience for users for further development. For PIXHAWK is a dual-processor flight controller, a 32-bit STM32F427 for Cortex M4 core 168MHz\/256KBRAM\/2MB Flash processor is good at powerful computing. And a 32bit STM32F 103 co-processor is mainly targeted for industrial use. Its characteristic is safety and stability. So even if the main processor crashes, there is a co-processor to ensure safety.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSimple Version for Pixhawk 2.4.8 Flight Controller:\u003c\/b\u003e\u003cbr\u003eIncluding a flight controller for Pixhawk 2.4.8, a safety switch, a buzzer, a set of I2C expansion board, and sandwich rubber.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Details:\u003c\/b\u003e\u003cbr\u003eProcessor:\u003cbr\u003e- Main processor: 32-bit STM32F427 for Cortex M4 core and FPU 168MHz \/ 256KB RAM \/ 2MB flash memory\u003cbr\u003e- Coprocessor: 32-bit STM32F103 fail-safe coprocessor\u003cbr\u003e\u003cbr\u003eSensor:\u003cbr\u003e- For ST Micro L3GD20 3-axis 16-bit gyroscope\u003cbr\u003e- For ST Micro LSM303D 3-axis 14-bit accelerometer\/magnetometer\u003cbr\u003e- For Invensense MPU 6000 3-axis accelerometer\/gyro\u003cbr\u003e- For MEAS MS5611 Barometer\u003cbr\u003e\u003cbr\u003eInterfaces:\u003cbr\u003e- 5 UARTs (serial ports), one high power, 2 hardware flow control\u003cbr\u003e- 2xCAN\u003cbr\u003e- Support for Spektrum DSM\/DSM2\/DSM-X Satellite and DX8 compatible input (DX9 and later versions are not supported)\u003cbr\u003e- Support S.BUS input and output\u003cbr\u003e- Support PPM input\u003cbr\u003e- Support RSSI (PWM or voltage) input\u003cbr\u003e- Support I2C\u003cbr\u003e- Support SPI\u003cbr\u003e- 3.3 and 6.6V ADC input\u003cbr\u003e- External microUSB port\u003cbr\u003e\u003cbr\u003ePower Systems:\u003cbr\u003e- Automatic diode control after power failure (uninterrupted power supply)\u003cbr\u003e- Support maximum 10V servo power supply and maximum 10A power consumption\u003cbr\u003e- All peripheral outputs are protected against overcurrent\u003cbr\u003e- All inputs are ESD protected\u003cbr\u003e\u003cbr\u003eGround Station:\u003cbr\u003e- For QGroundControl, MissionPlanner\u003cbr\u003e\u003cbr\u003eFirmware:\u003cbr\u003e- Support for PX4 and Ardupilot firmware for V, 2V3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e1. Advanced 32-bit high-performance processor for ARM cortex M4, which can run RTOS real-time operating system for Nuttx\u003cbr\u003e2. 14pcs PWM\/Servo output\u003cbr\u003e3. Bus interface (UART, I2C, SPI, CAN)\u003cbr\u003e4. Integrated backup power supply and failed backup controller, which can safely switch to the backup controller when the main controller fails\u003cbr\u003e5. Provide automatic and manual modes\u003cbr\u003e6. Provide redundant power input and failover function\u003cbr\u003e7. Multi-color LED lights\u003cbr\u003e8. Provide multi-tone buzzer interface\u003cbr\u003e9. Micro SD records flight data, (trajectory, sensor, position, altitude, power and all other data)\u003cbr\u003e10. Support optical flow sensor, perfect indoor fixed height and fixed point\u003cbr\u003e11. Support ultrasonic. Ultra-low altitude can not drop high, ultrasonic multi-faceted obstacle avoidance\u003cbr\u003e12. It can be installed with dual GPS to realize ultra-high-precision satellite positioning, and it can also support RTK differential positioning\u003cbr\u003e13. Support more than a dozen flight modes such as one-key return home, automatic cruise, automatic waypoint flight, fixed-point hover, fixed height, automatic landing, follow, self-stabilization, automatic circle, etc.\u003cbr\u003e14. Can flash the original PIX firmware (PX4) and firmware for Ardupilot (APM), support vertical take-off and landing, two-axis, etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage 3:\u003c\/b\u003e\u003cbr\u003e- 1 x For Pixhawk 2.4.8 Light Controller\u003cbr\u003e- 1 x Safety Switch\u003cbr\u003e- 1 x I2C Extension Board\u003cbr\u003e- 1 x Buzzer\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote:\u003cbr\u003e- SD card is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003eQ: What model does the flight control for Pixhawk support? What remote control is compatible?\u003cbr\u003eA: Support almost all aircraft models, car models, boat models, underwater robots, etc. on the market. Supports for RadioLink, WFLY, Futaba, FLYSKY, MC, Walkera, Siyi, Skydroid, JR etc. more than 5 channels remote control\u003cbr\u003e\u003cbr\u003eQ: How to power the flight controller?\u003cbr\u003eA: You can purchase the version with an ammeter. Use the ammeter for power supply, or 5V voltage stabilizer module BEC power supply, or power supply with BEC ESC.\u003cbr\u003e\u003cbr\u003eQ: Do GPS and flight controllers have their own compasses?\u003cbr\u003eA: Both GPS and flight control have their own compasses, and they are used as dual compasses when in use.\u003cbr\u003e\u003cbr\u003eQ: Can the flight control be re-developed?\u003cbr\u003eA: For Pixhawk is an open source flight controller, it can be re-developed. After purchase, source code, environment establishment and other open source materials will be provided.\u003cbr\u003e\u003cbr\u003eQ: Flight controller for Pixhawk VS APM flight controller\u003cbr\u003eA: The flight control for Pixhawk is more stable and accurate, and can operate more efficiently. APM flight control is cost-effective.\u003cbr\u003e\u003cbr\u003eQ: Does the flight controller provide technical support? Is there a tutorial?\u003cbr\u003eA: We provide powerful technical support services, provide a full set of PIX debugging and installation video tutorials, easy to complete the debugging.\u003cbr\u003e\u003cbr\u003eQ: How to achieve indoor fixed-point hovering? Does it support obstacle avoidance?\u003cbr\u003eA: The indoor fixed point needs to be equipped with an optical flow sensor (be purchased separately), the fixed point and height can be realized indoors, and an ultrasonic module (be purchased separately) can support obstacle avoidance.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-05.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pixhawk","offers":[{"title":"Default Title","offer_id":40826653704241,"sku":"73411","price":106.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077575295025_watermarked_0.jpg_0.png?v=1767862088"},{"product_id":"flight-controller-standard-version-for-pixhawk-2-4-8-without-gps-for-4-axis-multi-rotor-drones","title":"Flight Controller Standard Version For Pixhawk 2.4.8 Without GPS For 4-Axis Multi-Rotor Drones","description":"\u003cp\u003e\u003cb\u003eRead Before Purchasing:\u003c\/b\u003e\u003cbr\u003e- If the flight controller needs to automatically return to the origin and land at low voltage, it needs to be equipped with an ammeter (packages with ammeters can be purchased)\u003cbr\u003e- The damping plate is used for flight control and damping. Increase the stability, make the fixed height more stable, filter the vibration of the body\u003cbr\u003e- The bracket is a GPS support bracket, foldable, supports GPS fixation, and avoids interference by the body circuit\u003cbr\u003e- PPM decoder board: when some remote controllers do not support PPM or SBUS, PPM decoder board is needed to convert ordinary receivers into PPM\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlight Controller For PIXHAWK 2.4.8:\u003c\/b\u003e\u003cbr\u003eIt adopts a flight controller for PIXHAWK 2.4.8. It is a new generation of flight control system. Its predecessor is APM flight control. As the processor of APM flight control is close to full load, there is no way to meet more complex calculation processing, so the hardware manufacturer uses the current 32-bit processor with high performance. All hardware of flight control for PIXHAWK is transparent and open source. All its buses and peripherals are derived, which can not only be compatible with some peripherals, but also provide convenience for users for further development. For PIXHAWK is a dual-processor flight controller, a 32-bit STM32F427 for Cortex M4 core 168MHz\/256KBRAM\/2MB Flash processor is good at powerful computing. And a 32bit STM32F 103 co-processor is mainly targeted for industrial use. Its characteristic is safety and stability. So even if the main processor crashes, there is a co-processor to ensure safety.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStandard Version for Pixhawk 2.4.8 Flight Controller:\u003c\/b\u003e\u003cbr\u003eIncluding a flight controller for Pixhawk 2.4.8, a safety switch, a buzzer, a set of I2C expansion board, a set of PPM decoder board, a card reader and sandwich rubber.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eProduct Details:\u003c\/b\u003e\u003cbr\u003eProcessor:\u003cbr\u003e- Main processor: 32-bit STM32F427 for Cortex M4 core and FPU 168MHz \/ 256KB RAM \/ 2MB flash memory\u003cbr\u003e- Coprocessor: 32-bit STM32F103 fail-safe coprocessor\u003cbr\u003e\u003cbr\u003eSensor:\u003cbr\u003e- For ST Micro L3GD20 3-axis 16-bit gyroscope\u003cbr\u003e- For ST Micro LSM303D 3-axis 14-bit accelerometer\/magnetometer\u003cbr\u003e- For Invensense MPU 6000 3-axis accelerometer\/gyro\u003cbr\u003e- For MEAS MS5611 Barometer\u003cbr\u003e\u003cbr\u003eInterfaces:\u003cbr\u003e- 5 UARTs (serial ports), one high power, 2 hardware flow control\u003cbr\u003e- 2xCAN\u003cbr\u003e- Support for Spektrum DSM\/DSM2\/DSM-X Satellite and DX8 compatible input (DX9 and later versions are not supported)\u003cbr\u003e- Support S.BUS input and output\u003cbr\u003e- Support PPM input\u003cbr\u003e- Support RSSI (PWM or voltage) input\u003cbr\u003e- Support I2C\u003cbr\u003e- Support SPI\u003cbr\u003e- 3.3 and 6.6V ADC input\u003cbr\u003e- External microUSB port\u003cbr\u003e\u003cbr\u003ePower Systems:\u003cbr\u003e- Automatic diode control after power failure (uninterrupted power supply)\u003cbr\u003e- Support maximum 10V servo power supply and maximum 10A power consumption\u003cbr\u003e- All peripheral outputs are protected against overcurrent\u003cbr\u003e- All inputs are ESD protected\u003cbr\u003e\u003cbr\u003eGround Station:\u003cbr\u003e- For QGroundControl, MissionPlanner\u003cbr\u003e\u003cbr\u003eFirmware:\u003cbr\u003e- Support for PX4 and Ardupilot firmware for V, 2V3\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e1. Advanced 32-bit high-performance processor for ARM cortex M4, which can run RTOS real-time operating system for Nuttx\u003cbr\u003e2. 14pcs PWM\/Servo output\u003cbr\u003e3. Bus interface (UART, I2C, SPI, CAN)\u003cbr\u003e4. Integrated backup power supply and failed backup controller, which can safely switch to the backup controller when the main controller fails\u003cbr\u003e5. Provide automatic and manual modes\u003cbr\u003e6. Provide redundant power input and failover function\u003cbr\u003e7. Multi-color LED lights\u003cbr\u003e8. Provide multi-tone buzzer interface\u003cbr\u003e9. Micro SD records flight data, (trajectory, sensor, position, altitude, power and all other data)\u003cbr\u003e10. Support optical flow sensor, perfect indoor fixed height and fixed point\u003cbr\u003e11. Support ultrasonic. Ultra-low altitude can not drop high, ultrasonic multi-faceted obstacle avoidance\u003cbr\u003e12. It can be installed with dual GPS to realize ultra-high-precision satellite positioning, and it can also support RTK differential positioning\u003cbr\u003e13. Support more than a dozen flight modes such as one-key return home, automatic cruise, automatic waypoint flight, fixed-point hover, fixed height, automatic landing, follow, self-stabilization, automatic circle, etc.\u003cbr\u003e14. Can flash the original PIX firmware (PX4) and firmware for Ardupilot (APM), support vertical take-off and landing, two-axis, etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage 4:\u003c\/b\u003e\u003cbr\u003e- 1 x For Pixhawk 2.4.8 Light Controller\u003cbr\u003e- 1 x Safety Switch\u003cbr\u003e- 1 x I2C Extension Board\u003cbr\u003e- 1 x PWM Decoder Board\u003cbr\u003e- 1 x Card Reader\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- SD card is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFAQ:\u003c\/b\u003e\u003cbr\u003eQ: What model does the flight control for Pixhawk support? What remote control is compatible?\u003cbr\u003eA: Support almost all aircraft models, car models, boat models, underwater robots, etc. on the market. Supports for RadioLink, WFLY, Futaba, FLYSKY, MC, Walkera, Siyi, Skydroid, JR etc. more than 5 channels remote control\u003cbr\u003e\u003cbr\u003eQ: How to power the flight controller?\u003cbr\u003eA: You can purchase the version with an ammeter. Use the ammeter for power supply, or 5V voltage stabilizer module BEC power supply, or power supply with BEC ESC.\u003cbr\u003e\u003cbr\u003eQ: Do GPS and flight controllers have their own compasses?\u003cbr\u003eA: Both GPS and flight control have their own compasses, and they are used as dual compasses when in use.\u003cbr\u003e\u003cbr\u003eQ: Can the flight control be re-developed?\u003cbr\u003eA: For Pixhawk is an open source flight controller, it can be re-developed. After purchase, source code, environment establishment and other open source materials will be provided.\u003cbr\u003e\u003cbr\u003eQ: Flight controller for Pixhawk VS APM flight controller\u003cbr\u003eA: The flight control for Pixhawk is more stable and accurate, and can operate more efficiently. APM flight control is cost-effective.\u003cbr\u003e\u003cbr\u003eQ: Does the flight controller provide technical support? Is there a tutorial?\u003cbr\u003eA: We provide powerful technical support services, provide a full set of PIX debugging and installation video tutorials, easy to complete the debugging.\u003cbr\u003e\u003cbr\u003eQ: How to achieve indoor fixed-point hovering? Does it support obstacle avoidance?\u003cbr\u003eA: The indoor fixed point needs to be equipped with an optical flow sensor (be purchased separately), the fixed point and height can be realized indoors, and an ultrasonic module (be purchased separately) can support obstacle avoidance.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/73409\/73409-05.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Pixhawk","offers":[{"title":"Default Title","offer_id":40826654982193,"sku":"73412","price":114.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077575393329_watermarked_0.jpg_0.png?v=1767862042"},{"product_id":"m5stack-gps-module-m8n-esp32-support-for-nmea-amp-ubx-amp-rtcm-with-mcx-interface-and-built-in-antenna","title":"M5Stack GPS Module M8N ESP32 Support for NMEA \u0026 UBX \u0026 RTCM with MCX Interface and Built-in Antenna","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e- GPS is a satellite positioning module in the M5Stack stack module series. It is developed based on NEO-M8N module and equipped with active antenna.\u003cbr\u003e- NEO-M8 can spend a small amount of time to carry out high sensitivity acquisition and maintain low power consumption of the system.\u003cbr\u003e- The NEO-M8N integrates a 72-channel u-blox M8 GNSS engine, supports multiple GNSS systems: BDS, Galileo, GLONASS, GPS\/QZSS, and allows simultaneous reception of data from three GNSS systems.\u003cbr\u003e- The UART communication protocol is used between the M5Core and the GPS module, and the communication is realized through the connection pin * * UART2 (GPIO16, GPIO17) * *.\u003cbr\u003e- If you want to change the serial port baud rate, click (u-center-just-for-Windows) to view it\u003cbr\u003e- Note: In order to get a good signal from the GPS module, please place the module outdoors when using it.\u003cbr\u003e- UART protocol: baud rate (9600bps by default), data bit (8 bits), start bit (1 bit), stop bit (1 bit), check bit (none).\u003cbr\u003e- More details: https:\/\/docs.m5stack.com\/#\/zh_CN\/module\/gps\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003e- Working temperature: -40~80℃\u003cbr\u003e- Antenna type: Built-in ceramic antenna and external antenna\u003cbr\u003e- External antenna interface: SMA\u003cbr\u003e- Horizontal position accuracy: 2.5m minimum\u003cbr\u003e- GPS module (NEO-M8N) built-in flash memory, firmware upgrade through u-center-just-for-Windows\u003cbr\u003e- Support protocols: NMEA, UBX, RTCM\u003cbr\u003e- Sensitivity: - 167dBm\u003cbr\u003e- Size: 54 x 54 x 13mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x M5Stack GPS Module\u003cbr\u003e- 1 x External Antenna (length: 1m)\u003cbr\u003e\u003c\/p\u003e","brand":"M5Stack","offers":[{"title":"Default Title","offer_id":40826789330993,"sku":"80278","price":24.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077651480625_watermarked_0.jpg_0.png?v=1767849396"},{"product_id":"5mp-pix-optical-flow-sensor-camera-w-gh1-25-connector-for-drone-positioning-hovering-pixhawk2-1","title":"5MP PIX Optical Flow Sensor Camera w\/ GH1.25 Connector For Drone Positioning Hovering Pixhawk2","description":"\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003cbr\u003e- Visual Positioning and GPS Positioning are Compatible: By default, the flight controller for Pixhawk firmware version V3.4 or higher will automatically switch between visual positioning and GPS positioning. If the visual positioning data and GPS data are normal, the flight controller will integrate the two data to obtain better positioning accuracy. If the signal is lost, the flight controller will automatically switch to using visual positioning without manual intervention, making it more intelligent. In addition, users can turn off GPS positioning according to their needs and use visual positioning.\u003cbr\u003e- Ultrasonic and Barometer Compatible: Under the default settings, the flight controller for Pixhawk firmware version V3.4 and above will automatically switch the ultrasonic and barometer to set altitudes. When the altitude is lower than 3.5m\/11.5ft, to avoid low air flow instability, the flight controller will use ultrasonic to provide accurate altitude data. When the altitude is higher than 3.5m\/11.5ft, the flight controller will automatically switch the barometer to meet the higher demand for fixed altitude.\u003cbr\u003e- Maximum Height of Visual Positioning: In the default setting, the maximum visual positioning height of the flight control for Pixhawk firmware version V3.4 and above is based on the height of the camera's clear image. The vision positioning module camera adopts a high-definition lens with a focal length of 12mm\/0.5\", and the theoretical visual range is 30-40m\/98.4-131.2ft.\u003cbr\u003e- Easy to Use: The visual fixed-point module has passed all tests such as our data test, stability test, online debugging, etc. Users do not need to debug the module by themselves, plug and play. PIX optical flow sensor is perfect for indoor and outdoor positioning.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Excellent Performance: The vision fixed-point module adopts innovative image processing algorithms. After years of research and development and testing, under the existing hardware resources, it is excellent in data stability and anti-interference\u003cbr\u003e- Firmware Compatibility: The visual fixed-point module is compatible with the current mainstream flight control system for Pixhawk, and provides support for multiple stable versions of the flight control for Pixhawk and the latest V3.6.7\u003cbr\u003e- Reliable Quality: The visual fixed-point module uses excellent hardware resources, including its main chip to the gyroscope to the camera, high-definition lens. High-quality hardware resources are used to ensure the stable and reliable operation of the system\u003cbr\u003e- Abundant Information: We provide detailed configuration tutorials on the vision fixed-point module, various versions of firmware for Pixhawk, etc. The hardware used in the test video, such as motor ESCs, are all entry-level and inexpensive. Under normal circumstances, users configures according to our method, and at least the effect in the test can be achieved when the other parameters of the flight controller (for Pixhawk) are defaulted. And the hardware configuration is better than that in the video\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Parameters:\u003c\/b\u003e\u003cbr\u003e- STM32F407VET6 main chip, for ARM Cortex-M4 32b MCU+FPU\u003cbr\u003e- 752 x 480 MT9V034 image sensor, L3GD20 three-axis gyroscope, US-100 ultrasonic\u003cbr\u003e- 12mm\/0.5\" focal length M12 5MP HD lens (integrated infrared filter)\u003cbr\u003e- Module weight: 33g\/0.07 lb\u003cbr\u003e- Module size: 65 x 45mm\/2.6 x 1.8\"\u003cbr\u003e- Ultrasonic distance: 3.5m\/11.5ft\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Optical Flow Sensor\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73755\/73755-01.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73755\/73755-02.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73755\/73755-03.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73755\/73755-04.jpg\" style=\"width: 750px;\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826789658673,"sku":"73756","price":75.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077651808305_watermarked_0.jpg_0.png?v=1767849281"},{"product_id":"hakrc-f405-dm-f4520d-flight-controller-3-6s-5v-3a-9v-2-5a-for-dji-digital-transmitter-small-fpv-drones","title":"HAKRC F405 DM (F4520D) Flight Controller 3-6S 5V\/3A 9V\/2.5A For DJI Digital Transmitter Small FPV Drones","description":"\u003cp\u003e\u003cb\u003eNotice For Use:\u003c\/b\u003e\u003cbr\u003e- The flight controller has many integrated functions and the components are very dense. When installing, please not use tools (such as needle-nose pliers or sleeves) to screw the nuts. It is easy to scratch hardware of flight control and ESC and cause unnecessary losses. Please tighten the nut with your fingers, and quickly tighten the screw from the bottom with a screwdriver. (Remember not to be too tight, so as not to damage the PCB board).\u003cbr\u003e- Please not install propellers when installing and debugging the flight controller, try not to fly indoors, so as to avoid safety accidents. Before installing propellers for flight test, please check again whether the steering of motor and the direction of propeller are correct. Please not fly near crowds. Our company is not responsible for all losses caused by the crash of the aircraft.\u003cbr\u003e- Please not use non-original aluminum or nylon columns to avoid damage to the flight controller's hardware. The official standard configuration is a custom-sized nylon column that fits flight controller and ESC.\u003cbr\u003e- Before an aircraft is powered on, please check again whether the installation between the flight controller and ESC is correct (the pins or cables must be aligned and installed), check whether the welding positive and negative poles are correct, and check whether motor screws are against the motor stator to avoid short circuits.\u003cbr\u003e- Check whether there is any solder thrown out on electronic components of flight controller and ESC, for this may cause a short circuit. Users shall be responsible for short circuits caused by installation and welding.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Size: 31 x 28 x 8mm\/1.2 x 1.1 x 0.3\"\u003cbr\u003e- Hole spacing: 20 x 20mm\/0.8 x 0.8\"; hole diameter 4mm\/0.16\"\u003cbr\u003e- Weight: 6g\/0.01 lb\u003cbr\u003e- Processor: STM32F405RGT6\u003cbr\u003e- Gyroscope: MPU6000\u003cbr\u003e- BEC: 5V\/3A; 9V\/2.5A\u003cbr\u003e- Storage: 16MB\u003cbr\u003e- Input voltage: 3-6S\u003cbr\u003e- Firmware: for betaflight_4.1.0_MATEKF405\u003cbr\u003e- Uart serial port: 5pcs\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Flight Controller\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAKRC","offers":[{"title":"Default Title","offer_id":40826823671857,"sku":"73919","price":46.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077674811441_watermarked_0.jpg_0.png?v=1767843393"},{"product_id":"blheli-32-60a-esc-drone-esc-hakrc-f722-flight-controller-3-6s-for-fpv-drones-diy-users","title":"BLHeli 32 60A ESC Drone ESC + HAKRC F722 Flight Controller 3-6S For FPV Drones DIY Users","description":"\u003cp\u003e\u003cb\u003eESC:\u003c\/b\u003e\u003cbr\u003e- Dimensions: 45 x 42.5 x 6mm\/1.8 x 1.7 x 0.2\"\u003cbr\u003e- N.W.: 14.5g\/0.03 lb\u003cbr\u003e- Hole spacing: 30.5 x 30.5mm\/1.2 x 1.2\"\u003cbr\u003e- Continuous current: 60A\u003cbr\u003e- Maximum current: 70A\u003cbr\u003e- Software to adjust parameters: BLHeli 32\u003cbr\u003e- Input voltage: 2-6S\u003cbr\u003e- Drive signal: Support for Dshot150\/300\/600\/1200, Multishot, PWM, Oneshot125, Oneshot 42 and Multshot\u003cbr\u003e- Firmware version: BL32\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlight Controller:\u003c\/b\u003e\u003cbr\u003e- Size: 36 x 36mm\/1.4 x 1.4\"\u003cbr\u003e- N.W.: 6g\/0.01 lb\u003cbr\u003e- Hole spacing: 30.5 x 30.5mm\/1.2 x 1.2\"; diameter 4mm\/0.2\"\u003cbr\u003e- Processor: STM32F722RET6\u003cbr\u003e- Gyroscope: MPU6000 or ICM20602\u003cbr\u003e- BEC: 5V\/3A; 9V\/2.5A\u003cbr\u003e- Input voltage: 3-6S\u003cbr\u003e- Storage: 16MB\u003cbr\u003e- Firmware: for betaflight_4.1.0_MATEK722se\u003cbr\u003e- Uart serial port: 5pcs\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of ESC \u0026amp; Flight Controller\u003cbr\u003e\u003c\/p\u003e","brand":"BLHeli","offers":[{"title":"Default Title","offer_id":40826824917041,"sku":"73932","price":129.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077676089393_watermarked_0.jpg_0.png?v=1767843229"},{"product_id":"hakrc-f4126-35a-aio-flight-controller-esc-board-2-6s-integrated-board-for-fpv-racing-drones","title":"HAKRC F4126 35A AIO Flight Controller ESC Board 2-6S Integrated Board For FPV Racing Drones","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- PCB with high-end eight-layered 2oZ thick copper, which has stronger over-current capability and good heat dissipation performance\u003cbr\u003e- Imported 30V high current resistance MOS with long lifespan and strong load capacity\u003cbr\u003e- Industrial-grade LDO featuring high temperature resistance\u003cbr\u003e- Using high-quality capacitors for Murata, featuring strong filtering performance\u003cbr\u003e- Size: 31 x 31mm\/1.2 x 1.2\" [Mounting hole 25.5-26.5mm (1\")]\u003cbr\u003e- Net weight 7g\/0.02 lb\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlight Controller:\u003c\/b\u003e\u003cbr\u003e- CPU: STM32F411CEU6\u003cbr\u003e- IMU: MPU6000\u003cbr\u003e- OSD: AT7456E\u003cbr\u003e- Barometer: BMP280\u003cbr\u003e- LED: Support WS2812 and other programmable\u003cbr\u003e- Sensor: Built-in current sensor\u003cbr\u003e- Firmware version: for betaflight_4.1.1_MATEKF411\u003cbr\u003e- Receiver: for Frsky\/ Futaba\/ Flysky\/ TBS Crossfire\/ DSMX: DSM2 receiver\u003cbr\u003e\u003cbr\u003e\u003cb\u003eESC:\u003c\/b\u003e\u003cbr\u003e- Firmware: support for BLHELI_ S\u003cbr\u003e- Protocol: support for PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300 and Dshot600\u003cbr\u003e- Input voltage: 2-6S Lipo\u003cbr\u003e- Continuous current: 35A\u003cbr\u003e- Peak current: 40A for 5S\u003cbr\u003e- Firmware version: G-H-30\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x AIO Flight Controller ESC\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Battery and other items pictured are not included in the package, for demonstration purposes only.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73933\/73933-01.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73933\/73933-02.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73933\/73933-03.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73933\/73933-04.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/73933\/73933-05.jpg\" style=\"width: 750px;\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"HAKRC","offers":[{"title":"Default Title","offer_id":40826824982577,"sku":"73934","price":64.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077676154929_watermarked_0.jpg_0.png?v=1767843204"},{"product_id":"airspeed-meter-module-differential-pitot-tube-rc-airplane-accessories-suitable-for-pixhawk-amp-px4","title":"Airspeed Meter Module + Differential Pitot Tube RC Airplane Accessories Suitable For PIXHAWK \u0026 PX4","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe pitot tube use a digitally differential pressure sensor and I2C communication. It is suitable for PIXHAWK and PX4. Because its sensor is different from the ones for APM, it cannot replace the counterpart for APM.\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Airspeed Meter Module\u003cbr\u003e- 1 x Pitot Tube\u003cbr\u003e- 1 x Silicone Tube\u003cbr\u003e- 1 x 4-Pin Connecting Cable\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAttention:\u003c\/b\u003e\u003cbr\u003eElectronic equipment is a product with high technical content. When your equipment fails, please carefully check the supply voltage of cables.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eCheck For Faults:\u003c\/b\u003e\u003cbr\u003eYou can read airspeed counts using the APP for APM Planner or other ground stations. Blow into the pitot tube and observe the response. Both zero and small oscillations (2-3) are normal in still air. Airspeed varies with the square root of pressure, so at near zero differential pressure the change is very minimal, while in flight a larger pressure change is required to produce the estimated speed change. For most of the time, values will change by 0, 1, and 2, occasionally by 3 or 4, this is normal, as you won't see such changes when your aircraft is in a flight.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAirspeed Sensor Module:\u003c\/b\u003e\u003cbr\u003eThe top port is for dynamic pressure and the lower port is for static pressure\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 720px;\" src=\"https:\/\/www.byimg.com\/catalog\/75426\/75426-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/75426\/75426-02.jpg\"\u003e\u003cbr\u003e\u003cb\u003eConfigure Airspeed Ground Station:\u003c\/b\u003e\u003cbr\u003eTest Conditions:\u003cbr\u003e- Ground Station for Mission Planer 1.3.58\u003cbr\u003e- Version of flight control firmware: 3.9.0 (For reference only, for the configuration of different versions may be slightly different)\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/75426\/75426-03.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e- When ARSPD_BUS is configured as 0, it uses internal I2C 0.\u003cbr\u003e- ARSPD_SKIP_CAL is configured to 0. Every time your flight controller is restarted, the offset of the airspeed meter needs to be calibrated. When set to 1, the airspeed offset calibration is automatically skipped and the last calibrated offset is used.\u003cbr\u003e- When ARSPD_TUBE_ORDER is configured as 2, it automatically matches the top port or the bottom port as dynamic pressure.\u003cbr\u003e- When ARSPD_TYPE is configured as 1, 1:I2C-MS4525D0 is used.\u003cbr\u003e- After the configuration is complete, be sure to restart the flight controller, so that the airspeed meter can work normally.\u003cbr\u003e- In the debugging interface of the ground station, observe the changes of the airspeed meter. Generally, when the numerical value is kept within 1-3. Blow into the airspeed meter, if the airspeed increases, the airspeed meter is working properly.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/75426\/75426-04.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e- If the values of airspeed meter is too large and out of the normal range, users need to calibrate the airspeed meter.\u003cbr\u003e- Normal calibration steps: find \"PREFLIGHT_CALIBRATE\" on the \"Action\" interface, and click \"Execute Action\" (Attention: The dynamic pressure tube to calibrate the airspeed is generally carried out under no wind conditions. When there is wind, it can be sealed with an object to create conditions.)\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/75426\/75426-05.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eConfigure Cruise Airspeed:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/75426\/75426-06.jpg\"\u003e\u003cbr\u003eAttention: After the parameter TRIM_ARSPD_CM is modified, the flight controller must be restarted to make it to work.\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40827603583025,"sku":"75426","price":37.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078243401777_watermarked_0.jpg_0.png?v=1767821410"},{"product_id":"flight-controller-pix-32bit-apm-flight-controller-without-gps-for-pixhawk2-4-8-multi-rotor-drones","title":"Flight Controller PIX 32Bit APM Flight Controller without GPS for Pixhawk2.4.8 Multi-Rotor Drones","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Advanced 32-bit high-performance processor for ARM CortexM4, which can run NuttX RTOS real-time operating system\u003cbr\u003e- 14 PWM\/Servo outputs\u003cbr\u003e- Bus interface (UART, I2C, SPI, and CAN)\u003cbr\u003e- Integrated backup power supply and failure backup controller, can safely switch to backup control when the main controller fails\u003cbr\u003e- Provide automatic and manual mode\u003cbr\u003e- Provide redundant power input and fail-over function\u003cbr\u003e- Multi-color LED light\u003cbr\u003e- Provide multi-tone buzzer interface\u003cbr\u003e- Support MicroSD memory card to record flight data\u003cbr\u003e- Flight control with built-in compass, imported barometer, and accelerometer, supporting dual GPS dual compass to work\u003cbr\u003e- Flight control supports multi-rotor aircraft (applicable wheelbase includes 250, 330, 450, 500, 550, 650, and 680), fixed-wing aircraft, helicopter, ship model, car model, two-axis, VTOL aircraft and other models\u003cbr\u003e- Adapt to most remote controllers on the market, including for MC6 series, RadioLink series, Flysky, Walkera, WFLY, and FUTABAD\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cu\u003eProcessor:\u003c\/u\u003e\u003cbr\u003e- 32bit 2M flash STM32F427 for CortexM4, with hardware floating point processing unit with main frequency (168MHZ, 256K RAM)\u003cbr\u003e- 32bit STM32F103 backup co-processor\u003cbr\u003e\u003cbr\u003e\u003cu\u003eBuilt-in Sensor:\u003c\/u\u003e\u003cbr\u003e- L3GD20 3-axis digital 16-bit gyroscope\u003cbr\u003e- LSM303D 3-axis 14-bit accelerometer\/magnetometer\u003cbr\u003e- MPU6000 6-axis accelerometer\/magnetometer\u003cbr\u003e- MS5611 high-precision barometer\u003cbr\u003e\u003cbr\u003e\u003cu\u003eWorking Voltage and Environmental Requirements:\u003c\/u\u003e\u003cbr\u003e- Operating temperature: -5°C to +55°C\u003cbr\u003e- PM sensor working voltage: 2-6S\u003cbr\u003e- PM sensor output voltage: 5.4V 3A\u003cbr\u003e- PWM OUT input power supply voltage up to 9V (supports high voltage servos, while the original one for Pixhawk does not support power supply higher than 5.5V)\u003cbr\u003e- 2-way power supply automatic redundancy (PM port and PWM OUT port). PM port gives priority to power supply, and automatically switches to PWM OUT port for power supply in case of failure\u003cbr\u003e\u003cbr\u003e\u003cu\u003eDimensions and Weight:\u003c\/u\u003e\u003cbr\u003e- Flight controller size: 81 x 47 x 16mm\/3.2 x 1.9 x 0.6\"\u003cbr\u003e- Net weight: 37G\/0.08LB\u003cbr\u003e\u003cbr\u003e\u003cu\u003eData Interface:\u003c\/u\u003e\u003cbr\u003e- 14 PWM servo or ESC outputs\u003cbr\u003e- 25 UART (serial ports), one of which supports high power, and two of which have hardware flow control\u003cbr\u003e- Two CAN I\/O interfaces (one has internal 3.3V receiving and transmitting, and the other is on the expansion interface)\u003cbr\u003e- Support for Spektrum DSM\/DSM2\/DSM-X; Satellite receiver input: Allows the use of remote control receivers for Specktrum\u003cbr\u003e- Support for Futaba S.BUS input and output\u003cbr\u003e- PPM sum signal input\u003cbr\u003e- RSSI (PWM or voltage) input\u003cbr\u003e- I2C and SPI serial ports\u003cbr\u003e- Two 3.3V and one 6.6V analog signal inputs\u003cbr\u003e- Built-in microUSB interface and external microUSB interface expansion\u003cbr\u003e- Contains its own on-board microcontroller and FMU stack\u003cbr\u003e- Integrated power supply system with redundant design and extended protection\u003cbr\u003e\u003cbr\u003e\u003cu\u003ePeripheral Equipment:\u003c\/u\u003e\u003cbr\u003e- Support fixed wing drone, multi-rotor drone, helicopter, vehicle, and firmware\u003cbr\u003e- Supported receiver types: S-Bus, DSM2, PPM. Attention: If an ordinary PWM receiver is used, a ppm encoder is required\u003cbr\u003e- System requirements: for Windows XP SP3\/7\/8 (32 or 64 bit)\u003cbr\u003e- Support external CUAV products: MINIM OSD, 3DR digital transmission, XTEND digital transmission, RTB BOX digital transmission, MAAT tracking antenna, optical flow sensor\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Flight controller\u003cbr\u003e- 1 x Safety switch\u003cbr\u003e- 1 x Buzzer\u003cbr\u003e- 1 x 4GB MicroSD card\u003cbr\u003e- 1 x PPM decoder board\u003cbr\u003e- 1 x I2C expansion board\u003cbr\u003e- 1 x Sponge adhesive tape\u003cbr\u003e- 1 x Data cable\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Battery is not included. 2S~6S lithium polymer battery is recommended.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-05.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40827866054705,"sku":"76155","price":88.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078322929713_watermarked_0.jpg_0.png?v=1767802491"},{"product_id":"flight-controller-pix-32bit-apm-flight-controller-with-m8n-gps-for-pixhawk2-4-8-multi-rotor-drones","title":"Flight Controller PIX 32Bit APM Flight Controller with M8N GPS for Pixhawk2.4.8 Multi-Rotor Drones","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Advanced 32-bit high-performance processor for ARM CortexM4, which can run NuttX RTOS real-time operating system\u003cbr\u003e- 14 PWM\/Servo outputs\u003cbr\u003e- Bus interface (UART, I2C, SPI, and CAN)\u003cbr\u003e- Integrated backup power supply and failure backup controller, can safely switch to backup control when the main controller fails\u003cbr\u003e- Provide automatic and manual mode\u003cbr\u003e- Provide redundant power input and fail-over function\u003cbr\u003e- Multi-color LED light\u003cbr\u003e- Provide multi-tone buzzer interface\u003cbr\u003e- Support MicroSD memory card to record flight data\u003cbr\u003e- Flight control with built-in compass, imported barometer, and accelerometer, supporting dual GPS dual compass to work\u003cbr\u003e- Flight control supports multi-rotor aircraft (applicable wheelbase includes 250, 330, 450, 500, 550, 650, and 680), fixed-wing aircraft, helicopter, ship model, car model, two-axis, VTOL aircraft and other models\u003cbr\u003e- Adapt to most remote controllers on the market, including for MC6 series, RadioLink series, Flysky, Walkera, WFLY, and FUTABAD\u003cbr\u003e- The original M8N GPS module has high precision and stable working performance. Can support multiple satellite\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cu\u003eProcessor:\u003c\/u\u003e\u003cbr\u003e- 32bit 2M flash STM32F427 for CortexM4, with hardware floating point processing unit with main frequency (168MHZ, 256K RAM)\u003cbr\u003e- 32bit STM32F103 backup co-processor\u003cbr\u003e\u003cbr\u003e\u003cu\u003eBuilt-in Sensor:\u003c\/u\u003e\u003cbr\u003e- L3GD20 3-axis digital 16-bit gyroscope\u003cbr\u003e- LSM303D 3-axis 14-bit accelerometer\/magnetometer\u003cbr\u003e- MPU6000 6-axis accelerometer\/magnetometer\u003cbr\u003e- MS5611 high-precision barometer\u003cbr\u003e\u003cbr\u003e\u003cu\u003eWorking Voltage and Environmental Requirements:\u003c\/u\u003e\u003cbr\u003e- Operating temperature: -5°C to +55°C\u003cbr\u003e- PM sensor working voltage: 2-6S\u003cbr\u003e- PM sensor output voltage: 5.4V 3A\u003cbr\u003e- PWM OUT input power supply voltage up to 9V (supports high voltage servos, while the original one for Pixhawk does not support power supply higher than 5.5V)\u003cbr\u003e- 2-way power supply automatic redundancy (PM port and PWM OUT port). PM port gives priority to power supply, and automatically switches to PWM OUT port for power supply in case of failure\u003cbr\u003e\u003cbr\u003e\u003cu\u003eDimensions and Weight:\u003c\/u\u003e\u003cbr\u003e- Flight controller size: 81 x 47 x 16mm\/3.2 x 1.9 x 0.6\"\u003cbr\u003e- Net weight: 37G\/0.08LB\u003cbr\u003e\u003cbr\u003e\u003cu\u003eData Interface:\u003c\/u\u003e\u003cbr\u003e- 14 PWM servo or ESC outputs\u003cbr\u003e- 25 UART (serial ports), one of which supports high power, and two of which have hardware flow control\u003cbr\u003e- Two CAN I\/O interfaces (one has internal 3.3V receiving and transmitting, and the other is on the expansion interface)\u003cbr\u003e- Support for Spektrum DSM\/DSM2\/DSM-X; Satellite receiver input: Allows the use of remote control receivers for Specktrum\u003cbr\u003e- Support for Futaba S.BUS input and output\u003cbr\u003e- PPM sum signal input\u003cbr\u003e- RSSI (PWM or voltage) input\u003cbr\u003e- I2C and SPI serial ports\u003cbr\u003e- Two 3.3V and one 6.6V analog signal inputs\u003cbr\u003e- Built-in microUSB interface and external microUSB interface expansion\u003cbr\u003e- Contains its own on-board microcontroller and FMU stack\u003cbr\u003e- Integrated power supply system with redundant design and extended protection\u003cbr\u003e\u003cbr\u003e\u003cu\u003ePeripheral Equipment:\u003c\/u\u003e\u003cbr\u003e- Support fixed wing drone, multi-rotor drone, helicopter, vehicle, and firmware\u003cbr\u003e- Supported receiver types: S-Bus, DSM2, PPM. Attention: If an ordinary PWM receiver is used, a ppm encoder is required\u003cbr\u003e- System requirements: for Windows XP SP3\/7\/8 (32 or 64 bit)\u003cbr\u003e- Support external CUAV products: MINIM OSD, 3DR digital transmission, XTEND digital transmission, RTB BOX digital transmission, MAAT tracking antenna, optical flow sensor\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Flight controller\u003cbr\u003e- 1 x Safety switch\u003cbr\u003e- 1 x Buzzer\u003cbr\u003e- 1 x 4GB MicroSD card\u003cbr\u003e- 1 x PPM decoder board\u003cbr\u003e- 1 x I2C expansion board\u003cbr\u003e- 1 x Sponge adhesive tape\u003cbr\u003e- 1 x Data cable\u003cbr\u003e- 1 x M8N GPS module\u003cbr\u003e- 1 x Current meter\u003cbr\u003e- 1 x GPS bracket\u003cbr\u003e- 1 x Shock absorber board\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Battery is not included. 2S~6S lithium polymer battery is recommended.\u003cbr\u003e- Please leave a message about your desired current meter plug. If there is no remarks, the one with an XT60 plug will be delivered by default. Thank you!\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/76155\/76155-06.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40827866415153,"sku":"76156","price":127.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078323290161_watermarked_0.jpg_0.png?v=1767802403"}],"url":"https:\/\/www.thanksbuyer.com\/cs\/collections\/flight-control-gps.oembed?page=2","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}