CUAV P8 Radio UAV Telemetry Drone Telemetry Flight Control Data Transmission 60KM Base Station End

CUAV P8 Radio UAV Telemetry Drone Telemetry Flight Control Data Transmission 60KM Base Station End

Specifications:
- Working frequency: 840-850MHZ
- Error detection: 32-bit CRC, ARQ
- Working temperature: -40℃ to 85℃
- Antenna gain: 3DBi
- Serial port type: 3.3V for CMOS TTL
- Rate: up to 345kbps
- Working voltage: 12V-60V
- Input current: >2.5A
- Baud rate: 300bps to 230kbps; 57600
- Antenna gain: limit distance: 60km+; reference distance: 40km
- Interface: Antenna: SMA male connector; Serial port: GHR-06V-; SUSB: TYPE-C
- Transmission mode: frequency hopping/fixed frequency, transparent transmission, GMSK, 2GFSK, 4GFSK, QPSK
- Transmitting power: 100mw~1000mw (default 1000mw)
- Forward error correction: Hamming code, BCH, Gray code, Reed-Solomon code, Viterbi
- Power consumption: sleep <1mA, idle <20mA RX: 45~98mATX (peak), 2A
- Sensitivity: -109dBM at 115.2kdps; -108dBm at 172.8kdps; -106dBm at 230.4kbps
- Working mode: point-to-point, point-to-multipoint, relay mode
- Weight: P8 module 55g / 0.12 lb, antenna 31g / 0.07 lb
- Size: 65 x 40 x 16.5mm/2.6 x 1.6 x 0.6"

Package Included (Base Station End):
- 1 x P8 Module
- 1 x 840MHz Antenna
- 1 x XT30-XT60 Power Cable 25cm/9.8"
- 1 x Type-C Cable

Note:
- Battery is not included.
- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!