| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $47.92 | $46.94 | $45.48 | $43.52 | Contact US |
AXera PI Zero Module 5MP AI-ISP Camera Module Designed with SoC Chip AX620Q+SC450AI Image Sensor
$67.98
0.5-inch 1024X768 OLED Driver Board High Quality Circuit Board for V760A-5 Wearable Head Mounted Display
$40.24
1PCS SFP+ Dual Mode Optical Module Small Form-factor Pluggable Transceiver Support 10Gbps Transmission with LC Interface
$26.09
Description:
The FG085 is a low cost yet versatile function generator capable of producing signals of many different waveforms. As an easy-to-use tool operation of FG085 is very simple and straightforward. It is an ideal test/experiment tool for electronic hobbyists and students
Features
- Generating continuous waveforms of Sine, Square, Triangle, Ramp (up and down), and Staircase (up and down)
- Generating user defined arbitrary waveforms (AWG)
- Generating frequency sweeping signals of selected waveforms. Start frequency, stop frequency, and sweep rate can be independently set
- Generating servo test/control signals in micro-second resolution with user programmable pulse width, amplitude, and cycle
- Setting of frequency (or period), amplitude, and offset is done with digits - quick and straightforward
- Variable duty cycle from 1% - 100% for square signal
- Frequency (period), amplitude, and offset can be incrementally adjusted with rotary encoder
- Incremental step size can be set to any value. Very convenient for quickly adjust frequency/cycle arount a certain point or over a range [ NEW with firmware version 113-08501-110 or later]
- Trigger input available
- Synchorous output available for sweeping mode
- Settings are memorized after power down.
Can be used as an adjustable DC voltage source by setting frequency to 0
Specification
- Frequency range: 0 - 200KHz (Sine)
- Frequency resolution: 1Hz
- Period resolution: 1ms
- Maximum frequency error (CW mode): 0.1490Hz for F > 40Hz, 0.000596Hz for F <= 40Hz
- Maximum frequency error (Sweep mode): 0.1490Hz
- Amplitude range: 0 - 10V peak-to-peak
- Amplitude resolution: 0.1V
- Offset range: -5V - +5V
- Offset resolution: 40mV
- Memory depth: 256 bytes
- Sample rate: 2.5Msps
- Trigger input level: High - 3.5V (min), Low - 1.5V (max)
- Output delay at trigger: < 5us (when no panel operation)
- Sync Output Level: 5V TTL
- Output impedance: 50 ohm
- Power supply voltage: DC 15V (maximun 16V DC)
- Current comsuption: < 150mA (without loading)
- Dimension: 155 X 55 X 30 mm
- Net weight: 100 gram
Documents, firmwares, and tools: pls click the below (contact us because we could not use Hyperlinks here):
Quick Reference
Manual
Assembly Guide (08501K and 08502K)
Assembly Guide (08503K)
Firmware
Schematic
Part list
Assembly Back
Assembly Front
How to Generate User Defined Waveform
FG085 Waveform File Format
Waveform Template File
