{"title":"Flight Control \u0026 GPS","description":"","products":[{"product_id":"tiny-flight-controller-gps-fixed-wing-fpv-returning-function-balance-flight-control-arkbird-1","title":"Arkbird Tiny Flight Controller GPS Fixed-Wing FPV Returning Function Balance Flight Control","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Arkbird Flight Control Board ,with intelligent system,tilt angle function\u003c\/p\u003e\n\u003cp\u003e- Automatically Fly when the rocker indicate to 45 degree \u003c\/p\u003e\n\u003cp\u003e- ARKBIRD with 3 Axis Accelerate speed, gyro system\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Function all in one broad, on broad IMU (Inertial measurement unit).\u003c\/p\u003e\n\u003cp\u003e- Plug \u0026amp; Play, no soldering.\u003c\/p\u003e\n\u003cp\u003e- Intelligent PID controller. Easy to adjust, support delta-wing.\u003c\/p\u003e\n\u003cp\u003e- One button auto-leveling, semi-automatic flying\u003c\/p\u003e\n\u003cp\u003e- Lock angle 45°with MAX sticks, auto-leveling after releasing sticks.\u003c\/p\u003e\n\u003cp\u003e- Gyro 3D balance.\u003c\/p\u003e\n\u003cp\u003e- One button hover mode. regard the hover position as balance position.\u003c\/p\u003e\n\u003cp\u003e- 3 Axis Accelerate speed, gyro system, even for tough weather\u003c\/p\u003e\n\u003cp\u003e- Can be installed horizontal and vertical direction, also for mini quadcopter\u003c\/p\u003e\n\u003cp\u003e- Debug free, only need wire connection.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- GPS type: GPS 7.0\u003c\/p\u003e\n\u003cp\u003e- Applicable: like real machine ducted non-FPV\u003c\/p\u003e\n\u003cp\u003e- 32-bit CPU, intelligent adaptive control algorithm-free soldering design\u003c\/p\u003e\n\u003cp\u003e- Balance, GPS return, gyro stabilization, one-button crane, fence mode\u003c\/p\u003e\n\u003cp\u003e- ATT antenna automatic tracking: need adds external module   \u003c\/p\u003e\n\u003cp\u003e- Number of channels: 6 in 4 out\u003c\/p\u003e\n\u003cp\u003e- Mixed control: ordinary + delta wing\u003c\/p\u003e\n\u003cp\u003e- Power supply: BEC 5V\u003c\/p\u003e\n\u003cp\u003e- Airspeed RSSI PPM access support: PPM port\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x Flight Controller\u003c\/p\u003e\n\u003cp\u003e1 x Connect Cable\u003c\/p\u003e\n\u003cp\u003e1 x GPS Module \u003c\/p\u003e","brand":"Arkbird","offers":[{"title":"Default Title","offer_id":40824309514289,"sku":"60127","price":65.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076659593265_watermarked_0.jpg_0.png?v=1768079424"},{"product_id":"flight-controller-gps-fixed-wing-fpv-osd-full-set-cables-arkbird-2-1","title":"Flight Controller GPS Fixed-Wing FPV OSD Full Set Cables ARKBIRD 2.0","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- OPIONAL PLUG: T Plug, XT60 Plug \u003c\/p\u003e\n\u003cp\u003e- Standard high precision digitized airspeed meter to protect the airspeed and ground speed\u003c\/p\u003e\n\u003cp\u003e- Brand new case and inner framework design, double CPUs design, and optimized sensor's anti-knock performance\u003c\/p\u003e\n\u003cp\u003e- High-definition OSD menu, graphical rolling flight interface, with Chinese menu and Chinese flight interface  \u003c\/p\u003e\n\u003cp\u003e- With settable flap control(can set 1-7 channel mix control aileron-flap)\u003c\/p\u003e\n\u003cp\u003e- More mixed control include delta wing, V-tail, bio-motor, butterfly brake(Chanel 1, 2, 4, 7 to mix control)\u003c\/p\u003e\n\u003cp\u003e- Independent RSSI port(0-3.3V) and PPM port, support Arkbird 433MHz 10 channels + RSSI single wire output\u003c\/p\u003e\n\u003cp\u003e- Support \"Formation flight\", two Arkbird autopilots can show opposite position and auto track\u003c\/p\u003e\n\u003cp\u003e- Provide control value for some kinds of plane, such as skywalker 1680-1880 full serials, X5,X6,X7,X8 full serials, skyhunter, skysurfer, Mini talon and Nano talon. All parameters feedback from project actual flight and debug by a large of users\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Applicable: pixel level OSD animation interface\u003c\/p\u003e\n\u003cp\u003e- OSD type: Dual CPU + 8 OSD models are optional, real-time data map OSD display\u003c\/p\u003e\n\u003cp\u003e- ATT antenna automatic tracking: built-in AAT modulation mode fast\u003c\/p\u003e\n\u003cp\u003e- Number of channels: 6 in 6 out (with flap control)\u003c\/p\u003e\n\u003cp\u003e- Mixed control: ordinary + triangle + V tail + vertical takeoff and landing + butterfly brake + double set ordinary \u003c\/p\u003e\n\u003cp\u003e- Barometer: Yes\u003c\/p\u003e\n\u003cp\u003e- Airspeed interface: Yes\u003c\/p\u003e\n\u003cp\u003e- Power supply: Current is introduced into the power supply \u0026amp; BEC 5V \u003c\/p\u003e\n\u003cp\u003e- GPS type: GPS 8.0\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes: \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- 1 x Flight Control Board \u003c\/p\u003e\n\u003cp\u003e- 1 x Airspeed Meter \u003c\/p\u003e\n\u003cp\u003e- 1 x Current Sensor (XT60 Plug and T-Plug Optional)\u003c\/p\u003e\n\u003cp\u003e- 1 x GPS8.0\u003c\/p\u003e\n\u003cp\u003eFull set cables\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003ePlug (T Plug \u0026amp; XT60 Plug) is OPTIOANL\u003c\/p\u003e\n\u003cp\u003eWhen you place an order, please do leave a message to tell us which type of plug you choose. Thank you.\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824310693937,"sku":"60144","price":183.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076660707377_watermarked_0.jpg_0.png?v=1768078814"},{"product_id":"data-ground-station-data-link-s-g-900m-for-a2-naza-wkm-with-2-4g-ground-station-digital","title":"Data Ground Station Data Link S\/G 900M for A2 NAZA WKM With 2.4G Ground Station Digital","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Support: For DJI NAZA, WKM, A2 flight control ( Not support A3, N3)  \u003c\/p\u003e\n\u003cp\u003e- Control distance is far.  \u003c\/p\u003e\n\u003cp\u003e- Transmission is stable, no packet loss, no loss of control.\u003c\/p\u003e\n\u003cp\u003e- Simple connection and low installation requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Size: 49.6*32*13.9mm\u003c\/p\u003e\n\u003cp\u003e- Color: Black\u003c\/p\u003e\n\u003cp\u003e- Weight: 27g\u003c\/p\u003e\n\u003cp\u003e- Power supply: For DJI flight control power supply \u003c\/p\u003e\n\u003cp\u003e- Power: 250mW\u003c\/p\u003e\n\u003cp\u003e- Transmission Distance: about 10 km  \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x Transmit Station with Antenna\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824310956081,"sku":"60148","price":482.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076660969521_watermarked_0.jpg_0.png?v=1768078679"},{"product_id":"data-ground-station-data-transmit-machine-s-g-900m-for-a2-naza-wkm-1","title":"Data Ground Station Data Transmit Machine S\/G 900M for A2 NAZA WKM","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Support: For DJI NAZA, WKM, A2 flight control ( Not support A3, N3)\u003c\/p\u003e\n\u003cp\u003e- Control distance is far.\u003c\/p\u003e\n\u003cp\u003e- Transmission is stable, no packet loss, no loss of control.\u003c\/p\u003e\n\u003cp\u003e- Simple connection and low installation requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Size: 56.6*38*10.6mm \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- Color: Dark Gray\u003c\/p\u003e\n\u003cp\u003e- Weight: 35g\u003c\/p\u003e\n\u003cp\u003e- Power supply: For DJI flight control power supply  \u003c\/p\u003e\n\u003cp\u003e- Power:1W\u003c\/p\u003e\n\u003cp\u003e- Transmission Distance: about 30 km \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Includes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x Transmit Station with Antenna\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824311021617,"sku":"60149","price":822.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076661035057_watermarked_0.jpg_0.png?v=1768078658"},{"product_id":"flight-controller-px4-pix2-4-8-32-bit-flight-control-four-axis-multi-rotor-fixed-wing-uav-pixhawk","title":"Flight Controller PX4 PIX2.4.8 32-bit Flight Control Four-axis Multi-rotor Fixed-wing UAV Pixhawk","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e- Advanced 32 bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system;\u003c\/p\u003e\n\u003cp\u003e- Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control;\u003c\/p\u003e\n\u003cp\u003e- Provide redundant power input and fault transfer function;\u003c\/p\u003e\n\u003cp\u003e- 14* PWM\/ actuator output;\u003c\/p\u003e\n\u003cp\u003e- Bus interface (UART, I2C, SPI, CAN);\u003c\/p\u003e\n\u003cp\u003e- Provide automatic and manual mode;\u003c\/p\u003e\n\u003cp\u003e- Color LED lamp;\u003c\/p\u003e\n\u003cp\u003e- Multi tone buzzer interface;\u003c\/p\u003e\n\u003cp\u003e- Micro SD to record flight data;\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e- Processor:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e  32 bit 2M flash memory STM32F427 Cortex M4, with hardware floating point processing unit\u003c\/p\u003e\n\u003cp\u003e  Main frequency: 256K, 168MHZ RAM \u003c\/p\u003e\n\u003cp\u003e  32 bit STM32F103 backup co processor\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e- Sensor:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e  L3GD20 3 axis digital 16 bit gyroscope\u003c\/p\u003e\n\u003cp\u003e  LSM303D 3 axis 14 bit accelerometer \/magnetometer\u003c\/p\u003e\n\u003cp\u003e  MPU6000 6 axis accelerometer \/ magnetometer\u003c\/p\u003e\n\u003cp\u003e  MS5611 high precision barometer\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e- Interface:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e  5* UART, 1*compatible high voltage, 2*hardware flow control\u003c\/p\u003e\n\u003cp\u003e  2*CAN\u003c\/p\u003e\n\u003cp\u003e  Spektrum DSM\/DSM2\/DSM-X satellite receiver compatible input\u003c\/p\u003e\n\u003cp\u003e  Futaba SBUS compatible input and output\u003c\/p\u003e\n\u003cp\u003e  PPM signal input\u003c\/p\u003e\n\u003cp\u003e  RSSI (PWM or voltage) input\u003c\/p\u003e\n\u003cp\u003e  I2C\u003c\/p\u003e\n\u003cp\u003e  SPI\u003c\/p\u003e\n\u003cp\u003e  3.3 and 6.6VADC input\u003c\/p\u003e\n\u003cp\u003e  External USB MICRO interface\u003c\/p\u003e\n\u003cp\u003eColor: Black\u003c\/p\u003e\n\u003cp\u003eSize: 50x82x16mm \u003c\/p\u003e\n\u003cp\u003eSet Weight: 52g                                \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e1 x 2.4.8 Pixhawk main control\u003c\/p\u003e\n\u003cp\u003e1 x Safety switch\u003c\/p\u003e\n\u003cp\u003e1 x Flight control shell\u003c\/p\u003e\n\u003cp\u003e1 x Buzzer\u003c\/p\u003e\n\u003cp\u003e1 x 6pin to 6pin line\u003c\/p\u003e\n\u003cp\u003e1 x 4Pin to 4Pin line\u003c\/p\u003e\n\u003cp\u003e1 x 3pin DuPont line\u003c\/p\u003e\n\u003cp\u003e1 x SD card\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824316067889,"sku":"60249","price":90.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076665720881_watermarked_0.jpg_0.png?v=1768064338"},{"product_id":"tarot-mini-flight-controller-for-racing-quadcopter-fpv-multicoper-zyx26","title":"Tarot Mini Flight Controller for Racing Quadcopter FPV Multi-copter ZYX26","description":"\u003cp\u003e\u003cb\u003eDescription: \u003c\/b\u003e\u003cbr\u003eTarot Racing Quadcopter ZYX26 Flight Controller is specially designed for racing game. Self-stabilize mode and manual mode is all available. It is compliant with Cleanflight software. It is suitable for flight control of 120, 130, 140, 150, 180 race-level FPV multi-copter. \u003cbr\u003e\u003cbr\u003eTarot ZYX26 Flight Controller helps you attitude stabilization of multi axis aircraft, to provide you with the vehicle on the current state that allows you to freely control the flying direction of the aircraft. It is beyond your imagination. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Main controller size: 38×28×9MM\u003cbr\u003e- USB connector size: 37.5×16.5×6MM\u003cbr\u003e- Calibration software: Clean Flight\u003cbr\u003e- G.W.: 0.25kg \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Main Flight Controller \u003cbr\u003e- 1 x USB Connector for Calibration \u003cbr\u003e- 1 x Bunch of Connection Wires \u003cbr\u003e\u003c\/p\u003e","brand":"Tarot","offers":[{"title":"Default Title","offer_id":40824317673521,"sku":"60294","price":33.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076667162673_watermarked_0.jpg_0.png?v=1768063815"},{"product_id":"10km-wireless-radio-data-modem-ultra-long-range-radio-modem-for-fpv-drone-rfd900u","title":"10KM Wireless Radio Data Modem Ultra Long Range Radio Modem for FPV Drone RFD900u","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eFeatures:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e- The smallest, lightest, and very sensitive digital data transmission device on the market\u003cbr\u003e- AES hardware encryption for secure data links\u003cbr\u003e- Long distance greater than 10km depending on antenna and GCS settings\u003cbr\u003e- 2 u.FL RF connectors, diversity switches\u003cbr\u003e- 100mW (+20dBm) transmit power\u003cbr\u003e- Integrated transmit low-pass filter reduces interference to other co-located radio links\u003cbr\u003e- High-linearity low noise amplifier (LNA) with the latest technology pHEMT, high gain greater than 24dB\u003cbr\u003e- Receive SAW filter to block out-of-band interference\u003cbr\u003e- 128kB flash, 8kB RAM, more space can be customized.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePorts:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- RF: 2pcs u.FL\/IPX connectors \u003cbr\u003e- Series: TTL\u003cbr\u003e- Power Supply: +5V, Peak 300mA (When it is of the biggest transmitting power)\u003cbr\u003e- GPIO: 2pcs universal IO (Digital, ADC, PWM functions)\u003cbr\u003e- Connector: DF13, 8-Way Connector \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- Frequency Range: 902 - 928 MHz\u003cbr\u003e- Output Power: 100mW (+20dBm)\u003cbr\u003e- \u003cb\u003eAir Data Transmission Rates:  \u003c\/b\u003e\u003cbr\u003e  4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192 and 250 kbit\/sec (Optional, 64k default)\u003cbr\u003e- \u003cb\u003eUART Data Transmission Rates:\u003c\/b\u003e\u003cbr\u003e  2400, 4800, 9600, 19200, 38400, 57600, 115200 baud (Optional, 57600 default)\u003cbr\u003e- Receiving Sensitivity: \u003cbr\u003e  \u0026lt;-111dBm at 9.6kpbs, \u003cbr\u003e  \u0026lt;-107 dBm at 64kbps, \u003cbr\u003e  \u0026lt;-105dBm at 129kbps (air serial speed)\u003cbr\u003e- Size: 19 x 30.4 x 4.5mm (W*L*Thickness)\u003cbr\u003e- Weight: 2.7g \u003cbr\u003e- Power Supply: \u003cbr\u003e  +5V (+3.5 V min, +5.5 V max)\u003cbr\u003e  ~190mA avg. TX +20dBm\u003cbr\u003e  ~230mA peak TX +20dBm\u003cbr\u003e  ~77mA RX\u003cbr\u003e- Temperature Range: -40 to 85℃\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePackage Included\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- One Set of RDF900u Mini Module \u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60618-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824457855025,"sku":"60618","price":135.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076729585713_watermarked_0.jpg_0.png?v=1768059982"},{"product_id":"radio-data-modem-p900-antenna-for-flight-controller-ipx-amp-universal","title":"Radio Data Modem P900 + Antenna for Flight Controller IPX AMP Universal","description":"\u003cp\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-03.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Radio Data Modem \u003cbr\u003e- 1 x Antenna\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824457887793,"sku":"60619","price":121.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076729618481_watermarked_0.jpg_0.png?v=1768059972"},{"product_id":"radio-data-modem-p900-for-fpv-drone-pixhawk-amp-ttl-amp-rs232-version","title":"Radio Data Modem P900 For FPV Drone PIXHAWK AMP TTL and RS232 Version","description":"\u003cp\u003e\u003cb\u003eRecommended Power Supply: 9-24V \u003c\/b\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eParameters:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 577px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 819px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60619-03.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Radio Data Modem P900 For FPV Drone PIXHAWK AMP TTL \u0026amp; RS232 Version\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/60620-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201901\/60620-05.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824457920561,"sku":"60620","price":142.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076729651249_watermarked_0.jpg_0.png?v=1768059962"},{"product_id":"here-gps-rtk-gnss-for-pixhawk-2-autopilot-rover-m8p-for-agricultural-uav-drone","title":"HERE+ GPS RTK GNSS for Pixhawk 2 Autopilot Rover M8P for Agricultural UAV Drone","description":"\u003cp\u003e\u003cb\u003eHighlights:\u003c\/b\u003e\u003cbr\u003e- Centimeter level GNSS positioning for the mass market\u003cbr\u003e- Integrated Real Time Kinematics (RTK) for fast time to market\u003cbr\u003e- Smallest, lightest, and energy‑efficient RTK module\u003cbr\u003e- Complete and versatile solution due to base and rover variants \u003cbr\u003e\u003cb\u003e\u003cbr\u003eOther Features: \u003c\/b\u003e\u003cbr\u003e- Breakaway mount\u003cbr\u003e- 4 compass options (Alpha testers only)\u003cbr\u003e- MPU9250 IMU (for future Breakaway detection and compensation)\u003cbr\u003e- MS5611 Barometer\u003cbr\u003e- 6CM Ground plane\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x HERE+ GPS RTK GNSS \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824491114545,"sku":"61259","price":425.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076753244209_watermarked_0.jpg_0.png?v=1768053546"},{"product_id":"ist8-external-compass-module-geomagnetic-sensor-ist8310-external-compass-for-pix-flight-controller","title":"IST8 External Compass Module Geomagnetic Sensor IST8310 External Compass for PIX Flight Controller","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eWith built-in 3×3mm LGA geomagnetic sensor IST8310, the IST8 compass module is widely used in UAV drones. It supports for PIX flight controller in PX4 and ArduPilot systems. It can be used as an external compass for V5 flight controller. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Compass: IST8310\u003cbr\u003e- Operating Temperature: -40 to 85℃ \u003cbr\u003e- Power Input: 5V\u003cbr\u003e- Interface: I2C\u003cbr\u003e- Weight: 5g\u003cbr\u003e- Size: 23*14*9mm\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e- Optional Version: for V5 I2C Interface; for PIX \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x External Compass Module \u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Please tell us your desired version when purchasing. Thank you! \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eInstallation:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201904\/61344-01.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSupported Firmware:\u003c\/b\u003e\u003cbr\u003eIt is suitable for the firmware of the CUAV V5 flight controller, supporting for both PIX and APM firmware. If you are using other flight controller, please contact our customer service. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eCompass Calibration: \u003c\/b\u003e\u003cbr\u003eSee compass calibration interface\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824498126897,"sku":"61344","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076758192177_watermarked_0.jpg_0.png?v=1768052849"},{"product_id":"gy-us42-ultrasonic-sensor-module-i2c-for-pixhawk-apm-flight-control-replacement-for-mb1242-srf02","title":"GY-US42 Ultrasonic Sensor Module I2C for Pixhawk APM Flight Control Replacement for MB1242 SRF02","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Premium ranging sensor module \u003cbr\u003e- This ultrasonic sensor module for Pixhawk APM \u003cbr\u003e- Plug and play with I2C interface \u003cbr\u003e- Replacement for MB1242, MB1240 \u0026amp; SRF02 \u003cbr\u003e\u003cb\u003e\u003cbr\u003eWebsite for Pixhawk APM Settings:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"http:\/\/ardupilot.org\/copter\/docs\/common-rangefinder-maxbotixi2c.html\"\u003ehttp:\/\/ardupilot.org\/copter\/docs\/common-rangefinder-maxbotixi2c.html\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eTechnical Parameters:\u003c\/b\u003e\u003cbr\u003e- Measuring Range: 20cm to 720cm (VCC=5V)\u003cbr\u003e- Resolution: 1cm\u003cbr\u003e- Response Frequency: 15Hz \u003cbr\u003e- Working Voltage: 3-5V\u003cbr\u003e- Operating Current: 9mA (VCC=5V)\u003cbr\u003e- Operating Temperature: -20℃ to 65℃\u003cbr\u003e- Storage Temperature: -40℃ to 85℃ \u003cbr\u003e- Dimensions: 21.5 x 21 x 24.5mm \u003cbr\u003e- Weight: 5g \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Ultrasonic Sensor Module \u003cbr\u003e- 6 x Pins Accessories \u003cbr\u003e\u003cspan style=\"background-color: inherit;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Only ultrasonic distance measuring module is included in this package. \u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 683px;\" src=\"https:\/\/www.byimg.com\/catalog\/201908\/62453\/62453-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824555339825,"sku":"62453","price":12.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076804231217_watermarked_0.jpg_0.png?v=1768035680"},{"product_id":"cuav-v5-version-airspeed-meter-differential-pressure-sensor-for-v5-flight-controller","title":"CUAV V5 Version Airspeed Meter Differential Pressure Sensor for V5 Flight Controller","description":"\u003cp\u003e\u003cb\u003eDifferential Pressure Sensor Board:\u003c\/b\u003e\u003cbr\u003eThe MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, but particularly those employing a microcontroller or microprocessor with A\/D inputs. This patented, single element transducer combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.\u003cbr\u003e \u003cbr\u003eThe MPXV7002 is designed to measure positive and negative pressure. In addition, with an offset specifically at 2.5V instead of the conventional 0V, this new series allows to measure pressure up to 7kPa through each port for pressure sensing but also for vacuum sensing (refer to the transfer function in the data sheet for more detailed information). Features: -2 to 2 kPa (-0.3 to 0.3 psi). 0.5 to 4.5 V Output\u003cbr\u003e\u003cb\u003e\u003cbr\u003eCalibration Introduction of Airspeed Meter:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"http:\/\/plane.ardupilot.com\/wiki\/calibrating-an-airspeed-sensor\/\"\u003ehttp:\/\/plane.ardupilot.com\/wiki\/calibrating-an-airspeed-sensor\/\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Airspeed Meter \u003cbr\u003e- 1 x Silicone Tube \u003cbr\u003e- 1 x 4-Pin Cable \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: It is a high-tech product. When your equipment fails, please carefully check the line and power supply voltage. \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40824577196081,"sku":"62759","price":51.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076817535025_watermarked_0.jpg_0.png?v=1768031135"},{"product_id":"arkbird-nano-rc-autopilot-for-small-fpv-xt60-plug-full-kit-flight-control-gps-mini-current-sensor","title":"Arkbird-Nano RC Autopilot for Small FPV XT60 Plug+Full Kit (Flight Control+GPS+Mini Current Sensor)","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eUltra small size! It is designed with single CPU, integrated pixel-level OSD, AAT airborne module and mini ammeter. The autopilot weights only 15.2g. It is perfect for racing drones and small FPV aircrafts.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Arkbird Nano Autopilot\u003cbr\u003e- 1 x Arkbird Nano Current Sensor \u003cbr\u003e- 1 x Arkbird Nano GPS\u003cbr\u003e- 1 x Full Set of Cables \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: Please note that the default plug is XT60. \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 700px;\" src=\"https:\/\/www.byimg.com\/catalog\/201910\/63013\/63013-01.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWiring:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/201910\/63013\/63013-02.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eOSD Interface:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/201910\/63013\/63013-03.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- With high-precision digital airspeed meter interface. With airspeed \/ ground speed protection control.\u003cbr\u003e- HD pixel-level OSD menu with data graph display and 8 kinds of 3D animation plane models. \u003cbr\u003e- Integrated AAT airborne module for direct use with Arkbird AAT ground end.\u003cbr\u003e- Support Sbus or PPM input, 7-channel output, with stable PTZ output.\u003cbr\u003e- Intelligent flap control and release. You can set the speed to control flaps and 1-7 channels (aileron-flap) mixing control. \u003cbr\u003e- More mixed control methods include delta wing, V-tail wing, and bi-motor plane, bi-motor flying wing(differential steering) and butterfly brake (mixed control of 1247channel).\u003cbr\u003e- Support Arkbird433 10 channels + RSSI single line transmission. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e8 Basic Functions:\u003c\/b\u003e\u003cbr\u003e- Industrial reliability design, on-board buck chip. \"ESC + buck\" dual power supply.\u003cbr\u003e- Inertial measurement unit \u0026amp; air pressure to fix high. \u003cbr\u003e- Can be placed flat or sideways for models with small spaces.\u003cbr\u003e- Ultra-simple debugging, adaptive control algorithm, eliminating the need for complex tuning processes to suit a variety of models.\u003cbr\u003e- OSD display data + remote joystick to adjust parameters.\u003cbr\u003e- Various custom displays such as radar coordinates, real-time compass, flight time, horizon, and power consumption.\u003cbr\u003e- One button to balance, smart lock tilt system. The rocker is fully loaded with the corresponding locking angle of 45 degrees. When the rocker is released, your aircraft automatically flies.\u003cbr\u003e- Autonomous return. \u003cbr\u003e\u003cbr\u003e\u003cb\u003e12 Expanded Functions:\u003c\/b\u003e\u003cbr\u003e- Auxiliary Takeoff: Push the throttle and it will not output the throttle. Wait to run. You run with an airplane in hand at speeds greater than 5kmph, the throttle opens and automatically controls takeoff.\u003cbr\u003e- Fence Mode: Set a rectangular area and the minimum height. Your aircraft will automatically return once it is out of the area. Suitable for beginners to practice flying.\u003cbr\u003e- Waypoint Mode: Cycle through the set points.\u003cbr\u003e- Crane Mode: Take the vertical direction of the nose as the balance point, your aircraft can fly vertically and hover.\u003cbr\u003e- Route (fixed height orientation): When the joystick is back, it locks the altitude and heading, your airplane will fly in a straight line.\u003cbr\u003e- Intelligent Flap Control: When the airspeed\/ground speed is lower than the safe speed, flaps are lowered proportionally to increase the lift.\u003cbr\u003e- Flying Wing Butterfly Control: The rudder surface works like a damper plate to achieve smooth rudder steering of the flying wing.\u003cbr\u003e- Data Recording: Record flight time, range, power consumption and maximum records (height, distance, speed, current).\u003cbr\u003e- 3D Gyro Mode: The amount of rudder in the opposite direction is provided when aircraft body is moving. There is no rudder when there is no action to ensure the 3D attitude.\u003cbr\u003e- Stabilizing PTZ: Connect the 5 and 6 output channels to the servo PTZ. When tilting the aircraft, it will give a compensation amount in the opposite direction to keep the camera level.\u003cbr\u003e- Semi-balance Mode: It is in balance mode when the rocker rudder amount is less than 50%. When it is over 50%, it is in gyro mode, which can realize large-angle turning and even vertical climbing and rolling. After the action maneuver is completed, the joystick can be returned to the middle.\u003cbr\u003e- Vertical Take-off and Landing: Support dual-shot vertical take-off and landing models. You can adjust the parameters.\u003cbr\u003e\u003c\/p\u003e","brand":"Arkbird","offers":[{"title":"Default Title","offer_id":40824621760561,"sku":"63013","price":79.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076833034289_watermarked_0.jpg_0.png?v=1768027394"},{"product_id":"cuav-can-pmu-power-management-unit-voltage-current-tester-w-cables-for-v5-series-flight-control-pix-drone","title":"CUAV CAN PMU Power Management Unit Voltage Current Tester w\/ Cables For V5 Series Flight Control PIX Drone","description":"\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-05.jpg\"\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63499\/63499-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x CAN PMU Module \u003cbr\u003e- 1 x Cable For Battery (Battery is not included)\u003cbr\u003e- 1 x Cable For ESC \u003cbr\u003e- 1 x Power Cable For V5 Series Flight Control \u003cbr\u003e- 1 x CAN Cable \u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40824696438833,"sku":"63499","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076863311921_watermarked_0.jpg_0.png?v=1768019298"},{"product_id":"6ch-flight-mode-switcher-for-apm-pix-jiyi-support-for-futuba-6ex-ap-frsky-t6-saitek-x52-pro","title":"6CH Flight Mode Switcher For APM PIX JIYI Support For Futuba 6EX AP\/Frsky T6\/Saitek X52 Pro","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Mini size \u003cbr\u003e- Stable performance \u003cbr\u003e- Easy operation \u003cbr\u003e- Designed for open source flight control systems such as APM, PX4, and PIX. It can accurately and quickly switch the various flight modes it has, replacing the cumbersome way of 2CH or 3CH switch\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Flight Mode Switcher \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: Other items pictured are not included in the package, for demonstration purposes only. \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 752.75px; height: 701.939px;\" src=\"https:\/\/www.byimg.com\/catalog\/65845\/65845-02.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 557px;\" src=\"https:\/\/www.byimg.com\/catalog\/65845\/65845-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825268437041,"sku":"65845","price":12.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077034852401_watermarked_0.jpg_0.png?v=1767982931"},{"product_id":"cuav-flight-controller-open-source-for-apm-px4-pixhawk-fpv-rc-drone-quadcopter-x7-pro-version","title":"CUAV Flight Controller Open Source For APM PX4 Pixhawk FPV RC Drone Quadcopter X7 Pro Version","description":"\u003cp\u003e\u003cb\u003eDifference Between X7 \u0026amp; X7 Pro:\u003c\/b\u003e\u003cbr\u003eX7 Pro replaces the ICM-20689 chip on X7 with a high-end ADIS16470 chip. Because of its excellent gyro and acceleration drift performance, it is used in some cutting-edge aerospace projects. This time, we introduced it to open source flight control. After careful polishing, it is integrated into the IMU with triple redundancy and exerts excellent performance. The sizes of these two versions are the same. \u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-02.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-03.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-05.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-06.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-07.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-08.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-09.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-13.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/65849\/65849-14.jpg\"\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825268633649,"sku":"65850","price":1180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077035049009_watermarked_0.jpg_0.png?v=1767982859"},{"product_id":"flight-controller-obstacle-avoidance-sensor-altitude-ultrasonic-i2c-module-for-pixhawk-pix2-4-8-apm2-8-pixhack","title":"Flight Controller Obstacle Avoidance Sensor Altitude Ultrasonic I2C Module for PIXHAWK PIX2.4.8 APM2.8 PIXHACK","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e1. Excellent Performance: The module adopts a high-performance main processor to process the data required for altitude, convenient for different occasions and different needs. Ultrasonic comes with temperature compensation to avoid the influence of temperature on the accuracy of ultrasonic ranging.\u003cbr\u003e2. High Quality: The module adopts high-quality hardware resources to ensure the stable and reliable operation of the system.\u003cbr\u003e3. Easy to Use: The module is simple and easy to use, no need to change the hardware or software, plug and play.\u003cbr\u003e4. Ultrasonic Range: The ultrasonic range is 0.02~4.5M.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e1 x Obstacle Avoidance Sensor\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825334169649,"sku":"66160","price":13.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077060706353_watermarked_0.jpg_0.png?v=1767977881"},{"product_id":"cuav-tf02-pro-40m-laser-distance-sensor-single-point-lidar-sensor-for-v5-flight-control-pix-apm-uav","title":"CUAV TF02-Pro 40M Laser Distance Sensor Single Point Lidar Sensor For V5 Flight Control PIX APM UAV","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eTF02-Pro is a single-point ranging Lidar based on TF02 upgrade. The performance and accuracy of different reflectivity are improved, it can achieve stable, accuracy, sensitive and high frequency range detection.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- The range up to 40 meters\u003cbr\u003e- Ambient light resistance(Up to 100Klux)\u003cbr\u003e- High frame rate(up to 1000Hz)\u003cbr\u003e- Low power consumption\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Applications:\u003c\/b\u003e\u003cbr\u003e- Intelligent traffic\u003cbr\u003e- Intelligent parking lots\u003cbr\u003e- Material level monitoring\u003cbr\u003e- UAV\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Laser Distance Sensor\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 800.748px; height: 892.033px;\" src=\"https:\/\/www.byimg.com\/catalog\/66946\/66946-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 799.75px; height: 818.144px;\" src=\"https:\/\/www.byimg.com\/catalog\/66946\/66946-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800.343px; height: 583.45px;\" src=\"https:\/\/www.byimg.com\/catalog\/66946\/66946-03.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825541263409,"sku":"66946","price":99.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116149809_watermarked_0.jpg_0.png?v=1767964958"},{"product_id":"cuav-ammeter-current-meter-input-10-62v-max-120a-for-drone-aircraft-x7-series-pix-flight-control","title":"CUAV Ammeter Current Meter Input 10-62V Max 120A For Drone Aircraft X7 Series PIX Flight Control","description":"\u003cp\u003e\u003cb\u003eMain Functions:\u003c\/b\u003e\u003cbr\u003e1. Support 10-62V voltage input\u003cbr\u003e2.Maximum Passing Current: Max. 120A\u003cbr\u003e3. Measurement Accuracy: current accuracy 0.3A, voltage accuracy 0.15V within 80A\u003cbr\u003e4. Regulated Output: can provide up to 22W 5.4V\/4A power supply output for peripherals\u003cbr\u003e5. Power supply indicator LED, indicating power supply voltage status\u003cbr\u003e6. Future upgrades support more functions such as power consumption statistics and instantaneous power consumption push \u003cbr\u003e\u003cb\u003e\u003cbr\u003eHardware Parameters:\u003c\/b\u003e\u003cbr\u003e- Processor: STM32F103CBU6\u003cbr\u003e- Input voltage: 10-62V (2-15S Lipo)\u003cbr\u003e- Maximum current: 120A (Maximum measurable current 80A)\u003cbr\u003e- Voltage accuracy: ±0.15V\u003cbr\u003e- Current accuracy: ±0.3A\u003cbr\u003e- Resolution: 0.01A\/V\u003cbr\u003e- Maximum output power: 4800W\/90S\u003cbr\u003e- Maximum stable output power: 3600W\u003cbr\u003e- 5V regulated output: maximum 5A, stable 4A\u003cbr\u003e- Communication protocol: UAVCAN\u003cbr\u003e- Working temperature: -20 to 100℃\u003cbr\u003e- Firmware upgrade: support\u003cbr\u003e- Interface type: \u003cbr\u003e* IN\/ OUT: XT60-M\/XT60-F\u003cbr\u003e* Power\/CAN: 502585-0670\u003cbr\u003e* Other: SMO6B-CHS-TB\u003cbr\u003e- Product size: 140 x 25 x 13 mm (LxWxH)\u003cbr\u003e- Support for PX4 firmware: For version above PX4 Pro V1.10.1\u003cbr\u003e- Support for APM firmware:\u003cbr\u003e1. For Rover 3.5.1 and above\u003cbr\u003e2. For Copter 3.7 and above\u003cbr\u003e3. For Plane 3.10 and above\u003cbr\u003e4. For Heli3.7 and above\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAttention: \u003c\/b\u003e\u003cbr\u003eUsers for Copter3.6 firmware need to flash version 3.7 firmware and then flash back to version 3.6.\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Ammeter \u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Battery is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825542180913,"sku":"66951","price":51.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116411953_watermarked_0.jpg_0.png?v=1767964888"},{"product_id":"cuav-hv-pm-power-module-ammeter-xt60-connector-support-60v-5a-for-pixhack-flight-control","title":"CUAV HV-PM Power Module Ammeter XT60 Connector Support 60V 5A For Pixhack Flight Control","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Support higher input voltage: 10V-60V (3s~14s battery), Battery is not included\u003cbr\u003e- More accurate current and voltage detection: Voltage detection accuracy: ±0.1v; Current detection accuracy: ±0.2A\u003cbr\u003e- Support higher output current of power supply port: 5A\u003cbr\u003e- Maximum (detection) current: 60A \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Functions:\u003c\/b\u003e\u003cbr\u003e1. Provide 5V voltage output and maximum 5A current to power your flight controller\u003cbr\u003e2. Detect current voltage and output analog signal to flight controller\u003cbr\u003e3. Detect current system current and output analog signal to flight controller\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAttention:\u003c\/b\u003e\u003cbr\u003e- Because the maximum detection voltage for PIX flight control ADC is 3.3, it can only detect a maximum of 60A current.\u003cbr\u003e- It is easy to use. 6P signal line is inserted into flight control POWER interface.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Module Size: 32mm * 2mm\u003cbr\u003e- Product Weight: 29g\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of HV-PM Power Module\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: Battery is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eGround Station Settings:\u003c\/b\u003e\u003cbr\u003e- Connect to ground station using USB or digital transmission \u003cbr\u003e- Initial Setup \u0026gt;\u0026gt; Optional Hardware \u0026gt;\u0026gt; Battery Detector (Battery not included)\u003cbr\u003e- Select Monitor: 4; Sensor 0; For APM version 4; Fill in partial voltage ratio 18; Fill in amps per volt: 24\u003cbr\u003e\u003cb\u003e \u003cbr\u003eManual Voltage Calibration:\u003c\/b\u003e\u003cbr\u003eBecause PM modules are analog sensor devices, there may be certain differences. The parameters can be calibrated to obtain better accuracy.\u003cbr\u003e\u003cbr\u003e\u003cu\u003ePreparation Before Calibration:\u003c\/u\u003e\u003cbr\u003e1: Multimeter or low-voltage alarm (for calibration voltage)\u003cbr\u003e\u003cbr\u003e\u003cu\u003eCalibrating Voltage Steps:\u003c\/u\u003e\u003cbr\u003e1: Battery powered and connected to ground station;\u003cbr\u003e2: Use a multimeter or low-voltage alarm to measure current battery voltage;\u003cbr\u003e3: Select sensor version as 0, input measured voltage into measured battery voltage box, just click your mouse or click TAB key, ground station will automatically calculate a voltage division ratio coefficient and automatically save and write to flight control;\u003cbr\u003e4: Calibration is complete, no calibration is required for current.\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825542279217,"sku":"66952","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116477489_watermarked_0.jpg_0.png?v=1767964879"},{"product_id":"cuav-hv-pm-power-module-ammeter-xt60-connector-support-60v-5a-for-v5-v5-flight-control","title":"CUAV HV-PM Power Module Ammeter XT60 Connector Support 60V 5A For V5\/V5+ Flight Control","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Support higher input voltage: 10V-60V (3s~14s battery), Battery is not included\u003cbr\u003e- More accurate current and voltage detection: Voltage detection accuracy: ±0.1v; Current detection accuracy: ±0.2A\u003cbr\u003e- Support higher output current of power supply port: 5A\u003cbr\u003e- Maximum (detection) current: 60A \u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Functions:\u003c\/b\u003e\u003cbr\u003e1. Provide 5V voltage output and maximum 5A current to power your flight controller\u003cbr\u003e2. Detect current voltage and output analog signal to flight controller\u003cbr\u003e3. Detect current system current and output analog signal to flight controller\u003cbr\u003e\u003cb\u003e\u003cbr\u003eAttention:\u003c\/b\u003e\u003cbr\u003e- Because the maximum detection voltage for PIX flight control ADC is 3.3, it can only detect a maximum of 60A current.\u003cbr\u003e- It is easy to use. 6P signal line is inserted into flight control POWER interface.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Module Size: 32mm * 2mm\u003cbr\u003e- Product Weight: 29g\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of HV-PM Power Module\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Battery is not included in the package.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eGround Station Settings:\u003c\/b\u003e\u003cbr\u003e- Connect to ground station using USB or digital transmission \u003cbr\u003e- Initial Setup \u0026gt;\u0026gt; Optional Hardware \u0026gt;\u0026gt; Battery Detector (Battery not included)\u003cbr\u003e- Select Monitor: 4; Sensor 0; For APM version 4; Fill in partial voltage ratio 18; Fill in amps per volt: 24\u003cbr\u003e \u003cbr\u003e\u003cb\u003eManual Voltage Calibration:\u003c\/b\u003e\u003cbr\u003eBecause PM modules are analog sensor devices, there may be certain differences. The parameters can be calibrated to obtain better accuracy.\u003cbr\u003e \u003cbr\u003e\u003cu\u003ePreparation Before Calibration:\u003c\/u\u003e\u003cbr\u003e1: Multimeter or low-voltage alarm (for calibration voltage)\u003cbr\u003e\u003cbr\u003e\u003cu\u003eCalibrating Voltage Steps:\u003c\/u\u003e\u003cbr\u003e1: Battery powered and connected to ground station;\u003cbr\u003e2: Use a multimeter or low-voltage alarm to measure current battery voltage;\u003cbr\u003e3: Select sensor version as 0, input measured voltage into measured battery voltage box, just click your mouse or click TAB key, ground station will automatically calculate a voltage division ratio coefficient and automatically save and write to flight control;\u003cbr\u003e4: Calibration is complete, no calibration is required for current.\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40825542344753,"sku":"66954","price":69.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077116543025_watermarked_0.jpg_0.png?v=1767964860"},{"product_id":"pixhawk4-flight-controller-plastic-version-w-pm07-power-management-board-m8n-led-buzzer-gps-module","title":"Pixhawk4 Flight Controller Plastic Version w\/ PM07 Power Management Board M8N LED Buzzer GPS Module","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters\u003cb\u003e:\u003c\/b\u003e https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Plastic Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Holder\u003cbr\u003e-1 x PM07 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675382833,"sku":"67440","price":227.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077165924401_watermarked_0.jpg_0.png?v=1767957366"},{"product_id":"pixhawk4-flight-controller-plastic-version-px4-apm-open-source-firmware-for-rc-drone-quadcopter","title":"Pixhawk4 Flight Controller Plastic Version PX4\/APM Open Source Firmware for RC Drone Quadcopter","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, andaNuttXreal-timeoperatingsystem,deliveringincredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Plastic Version)\u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675481137,"sku":"67443","price":150.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166022705_watermarked_0.jpg_0.png?v=1767957333"},{"product_id":"pixhawk4-flight-controller-plastic-version-w-pm02-power-management-board-m8n-led-buzzer-gps-module","title":"Pixhawk4 Flight Controller Plastic Version w\/ PM02 Power Management Board M8N LED Buzzer GPS Module","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CAN Buses for dual CAN with serial ESC, Each CAN Bus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Plastic Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Holder\u003cbr\u003e-1 x PM02 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-2 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675546673,"sku":"67444","price":213.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166088241_watermarked_0.jpg_0.png?v=1767957321"},{"product_id":"pixhawk4-flight-controller-plastic-version-px4-apm-open-source-firmware-w-pm02-power-module-board","title":"Pixhawk4 Flight Controller Plastic Version PX4\/APM Open Source Firmware w\/ PM02 Power Module Board","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CAN Buses for dual CAN with serial ESC, Each CAN Bus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Plastic Version)\u003cbr\u003e-1 x PM02 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-2 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675644977,"sku":"67445","price":166.61,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166186545_watermarked_0.jpg_0.png?v=1767957308"},{"product_id":"pixhawk4-flight-controller-aluminum-version-w-pm07-power-management-board-m8n-led-buzzer-gps-module","title":"Pixhawk4 Flight Controller Aluminum Version w\/ PM07 Power Management Board M8N LED Buzzer GPS Module","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CAN Buses for dual CAN with serial ESC, Each CAN Bus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Aluminum Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Holder\u003cbr\u003e-1 x PM07 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675776049,"sku":"67446","price":276.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166317617_watermarked_0.jpg_0.png?v=1767957294"},{"product_id":"pixhawk4-flight-controller-aluminum-version-px4-apm-open-source-firmware-w-pm07-power-module-board","title":"Pixhawk4 Flight Controller Aluminum Version PX4\/APM Open Source Firmware w\/ PM07 Power Module Board","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CAN Buses for dual CAN with serial ESC, Each CAN Bus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Aluminum Version)\u003cbr\u003e-1 x PM07 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675874353,"sku":"67447","price":232.42,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166415921_watermarked_0.jpg_0.png?v=1767957282"},{"product_id":"pixhawk4-flight-controller-aluminum-version-px4-apm-open-source-firmware-w-m8n-led-buzzer-gps-module","title":"Pixhawk4 Flight Controller Aluminum Version PX4\/APM Open Source Firmware w\/ M8N LED Buzzer GPS Module","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Aluminum Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Holder\u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825675972657,"sku":"67448","price":244.52,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166514225_watermarked_0.jpg_0.png?v=1767957270"},{"product_id":"pixhawk4-flight-controller-aluminum-version-px4-apm-open-source-firmware-for-rc-drone-quadcopter","title":"Pixhawk4 Flight Controller Aluminum Version PX4\/APM Open Source Firmware for RC Drone Quadcopter","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Aluminum Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Stand\u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-1 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825676070961,"sku":"67449","price":198.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166612529_watermarked_0.jpg_0.png?v=1767957259"},{"product_id":"pixhawk4-flight-controller-aluminum-version-w-pm02-power-management-board-m8n-led-buzzer-gps-module","title":"Pixhawk4 Flight Controller Aluminum Version w\/ PM02 Power Management Board M8N LED Buzzer GPS Module","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e-Pixhawk 4 is the latest update to the successful family of Pixhawk flight controllers. It is designed and developed in collaboration with Holybro and Auterion, optimized to run PX4. It comes preinstalled with the latest PX4 firmware.\u003cbr\u003e-It features the currently most advanced processor technology from STMicroelectronics, sensor technology from Bosch, InvenSense, andaNuttXreal-timeoperatingsystem,deliveringincredible performance, flexibility, and reliability for controlling any autonomous vehicle.\u003cbr\u003e-The Pixhawk 4’s microcontroller now has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot.\u003cbr\u003e-High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances.\u003cbr\u003e-The 2 external SPI buses and 6 associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS\/Compass modules.\u003cbr\u003e-The Pixhawk 4 autopilot development kit is perfect for developers at corporate research labs, startups, and for academics (research, professors, students).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003ePower module output: 4.9~5.5V\u003cbr\u003eMax input voltage: 6V\u003cbr\u003eMax current sensing: 120A\u003cbr\u003eUSB Power Input: 4.75~5.25V\u003cbr\u003eServo Rail Input: 0~36V\u003cbr\u003eOperating temp. -40~85℃\u003cbr\u003eStorage temp. -40~85℃\u003cbr\u003eCertification: CE, FCC, RoHS \u003cbr\u003e\u003cbr\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003cbr\u003e• 8-16 PWM servo outputs (8 from IO, 8 from FMU)\u003cbr\u003e• 3 dedicated PWM\/Capture inputs on FMU\u003cbr\u003e• Dedicated R\/C input for CPPM\u003cbr\u003e• Dedicated R\/C input for Spektrum \/ DSM and S.Bus with analog \/ PWM RSSI input\u003cbr\u003e• Dedicated S.Bus servo output\u003cbr\u003e• 5 general purpose serial ports, 2 with flow control, 1 with separate 1.5A current limit\u003cbr\u003e• 3 I2C ports\u003cbr\u003e• 4 SPI buses\u003cbr\u003e• 1 internal high speed SPI sensor bus with 4 chip selections and 6 DRDYs\u003cbr\u003e• 1 internal low noise SPI bus dedicated for Barometer with 2 chip selections, no DRDYs\u003cbr\u003e• 1 internal SPI bus dedicated for FRAM\u003cbr\u003e• Supports dedicated SPI calibration EEPROM located on sensor module\u003cbr\u003e• 1 external SPI buses\u003cbr\u003e• Up to 2 CANBuses for dual CAN with serial ESC, Each CANBus has individual silent controls or ESC RX-MUX control\u003cbr\u003e• Analog inputs for voltage \/ current of 2 batteries\u003cbr\u003e• 2 additional analog inputs\u003cbr\u003e\u003cbr\u003ePixhawk4 technical parameters: https:\/\/docs.px4.io\/en\/flight_controller\/pixhawk4.html\u003cbr\u003e\u003cbr\u003ePixhawk4 quick start guide: https:\/\/docs.px4.io\/master\/en\/assembly\/quick_start_pixhawk4.html\u003cbr\u003e\u003cbr\u003eArduPilot's Pixhawk4 description and hardware definition: https:\/\/github.com\/ArduPilot\/ardupilot\/tree\/master\/libraries\/AP_HAL_ChibiOS\/hwdef\/Pixhawk4\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x Pixhawk4 (Aluminum Version)\u003cbr\u003e-1 x Pixhawk4 GPS Module \u003cbr\u003e-1 x GPS Holder\u003cbr\u003e-1 x PM02 Power Management Board \u003cbr\u003e-1 x I2C\/CAN Expansion Board \u003cbr\u003e-3 x 6 to 6 Pin Cable \u003cbr\u003e-2 x 10 to 10 Pin Cable  \u003cbr\u003e-1 x 8 to 8 Pin Cable\u003cbr\u003e-1 x 7 to 7 Pin Cable\u003cbr\u003e-2 x 4 to 4 Pin Cable \u003cbr\u003e-1 x 6 to 4 Pin Cable \u003cbr\u003e-1 x XSR Receiver Cable \u003cbr\u003e-1 x DEBUG Cable \u003cbr\u003e-1 x DSMX Receiver Cable \u003cbr\u003e-1 x SBUS Out cable \u003cbr\u003e-1 x SBUS Receiver Cable \u003cbr\u003e-2 x 3*8 Pin Header Board\u003cbr\u003e-1 x 3*6 Pin Header Board\u003cbr\u003e-1 x USB Cable \u003cbr\u003e-1 x Foam Set \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825676169265,"sku":"67450","price":260.59,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077166710833_watermarked_0.jpg_0.png?v=1767957245"},{"product_id":"3dr-pixhawk-mini-flight-controller-multi-rotor-drone-vtol-flight-control-32-bit-arm-rev-3-processor","title":"3DR Pixhawk Mini Flight Controller Multi-rotor Drone VTOL Flight Control 32 Bit ARM Rev 3 Processor","description":"\u003cp\u003e\u003cb\u003eImprovements over the original Pixhawk:\u003c\/b\u003e\u003cbr\u003e-Smaller, a third of the size.\u003cbr\u003e-Rev 3 processor for long term software support.\u003cbr\u003e-Improved sensors, both primary and secondary IMU MPU9250 and ICM20608 for more reliable flight.\u003cbr\u003e-Micro JST rather than the hard-to-use DF13 connectors.\u003cbr\u003e-Integrated piezo speaker and safety switch.\u003cbr\u003e-Natively supports 4S batteries with the included PDB.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e-Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS\u003cbr\u003e-8 PWM\/servo outputs\u003cbr\u003e-Abundant connectivity options for additional peripherals (UART, I2C, CAN)\u003cbr\u003e-Redundant power supply inputs and automatic failover\u003cbr\u003e-Integrated safety switch and optional external safety button for easy motor activation\u003cbr\u003e-Multicolor LED indicator\u003cbr\u003e-Integrated multi-tone piezo audio indicator\u003cbr\u003e-Micro SD card for long-time high-rate logging\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x 3DR Pixhawk4 Mini \u003cbr\u003e-1 x Accessories Kit\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825688227889,"sku":"67464","price":89.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077170151473_watermarked_0.jpg_0.png?v=1767957050"},{"product_id":"3dr-pixhawk-mini-flight-controller-multi-rotor-vtol-flight-control-w-pm06-power-board-m8n-gps-module","title":"3DR Pixhawk Mini Flight Controller Multi-rotor VTOL Flight Control w\/ PM06 Power Board M8N GPS Module","description":"\u003cp\u003e\u003cb\u003eImprovements over the original Pixhawk:\u003c\/b\u003e\u003cbr\u003e-Smaller, a third of the size.\u003cbr\u003e-Rev 3 processor for long term software support.\u003cbr\u003e-Improved sensors, both primary and secondary IMU MPU9250 and ICM20608 for more reliable flight.\u003cbr\u003e-Included GPS module uBlox M8N GPS\/GLONASS\/BeiDou receiver for faster and stronger GPS lock.\u003cbr\u003e-Micro JST rather than the hard-to-use DF13 connectors.\u003cbr\u003e-Integrated piezo speaker and safety switch.\u003cbr\u003e-Natively supports 4S batteries with the included PDB.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e-Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS\u003cbr\u003e-8 PWM\/servo outputs\u003cbr\u003e-Abundant connectivity options for additional peripherals (UART, I2C, CAN)\u003cbr\u003e-Redundant power supply inputs and automatic failover\u003cbr\u003e-Integrated safety switch and optional external safety button for easy motor activation\u003cbr\u003e-Multicolor LED indicator\u003cbr\u003e-Integrated multi-tone piezo audio indicator\u003cbr\u003e-Micro SD card for long-time high-rate logging\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Board:\u003c\/b\u003e\u003cbr\u003ePCB Current: 120A continued\u003cbr\u003eUBEC Current: 3A Max\u003cbr\u003ePower input: DC 7V~42V(2S~10S)\u003cbr\u003ePower output: DC 5.1V~5.3V\u003cbr\u003eDimensions: 35x35x5mm\u003cbr\u003eMounting hole: 30.5mm*30.5mm\u003cbr\u003eWeight: 7g\u003cbr\u003e\u003cbr\u003e\u003cb\u003eGPS Module:\u003c\/b\u003e\u003cbr\u003e-Based on the uBlox M8N\u003cbr\u003e-Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)\u003cbr\u003e-Industry leading, 167 dBm navigation sensitivity\u003cbr\u003e-Security and integrity protection\u003cbr\u003e-Supports all satellite augmentation systems\u003cbr\u003e-Advanced jamming and spoofing detection\u003cbr\u003e-Product variants to meet performance and cost requirements\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x 3DR Pixhawk4 Mini \u003cbr\u003e-1 x PM06 Power Board\u003cbr\u003e-1 x M8N GPS Module\u003cbr\u003e-1 x Accessories Kit\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825688326193,"sku":"67465","price":134.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077170249777_watermarked_0.jpg_0.png?v=1767957040"},{"product_id":"3dr-pixhawk-mini-flight-controller-multi-rotor-drone-vtol-flight-control-w-pm06-power-board","title":"3DR Pixhawk Mini Flight Controller Multi-rotor Drone VTOL Flight Control w\/ PM06 Power Board","description":"\u003cp\u003e\u003cb\u003eImprovements over the original Pixhawk:\u003c\/b\u003e\u003cbr\u003e-Smaller, a third of the size.\u003cbr\u003e-Rev 3 processor for long term software support.\u003cbr\u003e-Improved sensors, both primary and secondary IMU MPU9250 and ICM20608 for more reliable flight.\u003cbr\u003e-Micro JST rather than the hard-to-use DF13 connectors.\u003cbr\u003e-Integrated piezo speaker and safety switch.\u003cbr\u003e-Natively supports 4S batteries with the included PDB.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e-Advanced 32 bit ARM Cortex® M4 Processor running NuttX RTOS\u003cbr\u003e-8 PWM\/servo outputs\u003cbr\u003e-Abundant connectivity options for additional peripherals (UART, I2C, CAN)\u003cbr\u003e-Redundant power supply inputs and automatic failover\u003cbr\u003e-Integrated safety switch and optional external safety button for easy motor activation\u003cbr\u003e-Multicolor LED indicator\u003cbr\u003e-Integrated multi-tone piezo audio indicator\u003cbr\u003e-Micro SD card for long-time high-rate logging\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Board:\u003c\/b\u003e\u003cbr\u003ePCB Current: 120A continued\u003cbr\u003eUBEC Current: 3A Max\u003cbr\u003ePower input: DC 7V~42V(2S~10S)\u003cbr\u003ePower output: DC 5.1V~5.3V\u003cbr\u003eDimensions: 35x35x5mm\u003cbr\u003eMounting hole: 30.5mm*30.5mm\u003cbr\u003eWeight: 7g\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e-1 x 3DR Pixhawk4 Mini \u003cbr\u003e-1 x PM06 Power Board\u003cbr\u003e-1 x Accessories Kit\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825688457265,"sku":"67466","price":96.41,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077170380849_watermarked_0.jpg_0.png?v=1767957029"},{"product_id":"aluminum-case-cover-shell-for-pixhawk4-px4-autopilot-2-4-8-32-bit-flight-controller","title":"Aluminum Case Cover Shell for Pixhawk4 PX4 Autopilot 2.4.8 32 Bit Flight Controller","description":"\u003cp\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003eMaterial: aluminum\u003cbr\u003eNet weight: 33g\u003cbr\u003eGross weight: 37g\u003cbr\u003eApplication: for Pixhawk 4 flight controller\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e1 x Aluminum Shell\u003cbr\u003e1 x Accessories Kit\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825690685489,"sku":"67480","price":61.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077172117553_watermarked_0.jpg_0.png?v=1767956847"},{"product_id":"for-jiyi-k-flight-controller-set-perfect-for-diy-agricultural-plant-protection-spray-drones","title":"For Jiyi K++ Flight Controller Set Perfect For DIY Agricultural Plant Protection Spray Drones","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eDescription: \u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003eAs a new generation of flagship flight control system, K++ combines the advantages of classic flight control K3A, and strengthens the compatibility and multi-redundancy scheme to form a redundant redundancy control system with superior performance and strong reliability. Work safe.\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003ePrecise Control: \u003cbr\u003eFlight accuracy increased by 25%.\u003cbr\u003eVertical control accuracy increased by 20%.\u003cbr\u003eThe trajectory is more precise and the flight is smoother.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eStrong Shock Resistance:\u003c\/b\u003e\u003cbr\u003eDouble shock absorption structure design.\u003cbr\u003eRespond to a variety of complex vibration effects.\u003cbr\u003eThe aging of the rack can also be stable.\u003cbr\u003eReduce investment in after-sales maintenance.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eMultiple Redundant Backup: \u003c\/b\u003e\u003cbr\u003eThree redundant IMU.\u003cbr\u003eDouble redundant barometer.\u003cbr\u003eFlying is safer.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eNoise Reduction and Power Saving:\u003c\/b\u003e\u003cbr\u003eMotor noise is three times smaller.\u003cbr\u003eProvince 5~15% electricity.\u003cbr\u003eThe flying sound is smaller.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eCalibration Free: \u003c\/b\u003e\u003cbr\u003eIndustrial grade sensor configuration.\u003cbr\u003eOne calibration.\u003cbr\u003eLifetime free IMU calibration.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eAttitude Control:\u003c\/b\u003e\u003cbr\u003eThe attitude control stability is doubled.\u003cbr\u003eControl is more stable.\u003cbr\u003eBetter wind resistance.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eDual CPU Configuration:\u003c\/b\u003e\u003cbr\u003eDual CPU configuration.\u003cbr\u003eMore powerful processing.\u003cbr\u003eSupports up to 1000Hz ESC control.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eBackup Power:\u003c\/b\u003e\u003cbr\u003eThe main control supports the backup power interface.\u003cbr\u003eThe power supply is more reliable.\u003cbr\u003e\u003cb\u003e \u003cbr\u003eIntelligent Vibration Analysis Function:\u003c\/b\u003e\u003cbr\u003eK++ comes with intelligent vibration analysis function, which can determine the vibration of the aircraft in real time during flight, and display the safety warning in the APP to help adjust the adaptability of all aspects of the fuselage device, making the flight operation more energy efficient , safer and safer.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eMultiple Backups are Safer to Fly:\u003c\/b\u003e\u003cbr\u003eDuring the sensor, the sensor data of IMU is monitored in real time through advanced diagnostic algorithms. When the sensor in the navigation system is abnormal, the system immediately switches to another sensor. To ensure the safe flight of the aircraft.\u003cbr\u003e \u003cbr\u003e\u003cb\u003eOne Calibration, Not Afraid of Environmental Interference:\u003c\/b\u003e\u003cbr\u003eAfter the same aircraft flight control system is installed, it only needs to be calibrated once. Even if the operating environment is replaced, it does not need to be recalibrated and is easy to Use.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eProduct Parameters:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003eSupported multi-rotor types:\u003cbr\u003eQuadcopter (+, X)\u003cbr\u003eHexacopter (+, X, IY and YI coaxial twins)\u003cbr\u003eOctocopter (+ type, X type, V type)\u003cbr\u003eSupported ESC type: 490HZ or less PWM ESC\u003cbr\u003eMaximum output channel: 8 channels\u003cbr\u003e \u003cbr\u003eRecommended remote control type\u003cbr\u003eSupported receiver types: For PPM, S-BUS receiver\u003cbr\u003eSupport expansion equipment: For K-BOX, IOT, RTK, obstacle avoidance radar, terrain radar, integrated remote control, FPV camera, flow meter, level gauge\u003cbr\u003eWorking voltage: 2-12S\u003cbr\u003ePower consumption: less than 5W\u003cbr\u003eWorking environment temperature: -10 to 60°C\u003cbr\u003eStorage environment temperature: -25 to 60°C\u003cbr\u003eEarthquake resistance rating: \u0026lt;1G\u003cbr\u003e \u003cbr\u003eFlight characteristics\u003cbr\u003eHovering accuracy: horizontal direction ±1.5 m; vertical direction ±0.5 m\u003cbr\u003eMaximum tilt angle: 30°\u003cbr\u003eMaximum yaw speed: 150°\/sec\u003cbr\u003eSBUS receiver Maximum vertical speed: 6 m\/s\u003cbr\u003eWind resistance: continuous wind: 4\u003cbr\u003eGust: Level 5\u003cbr\u003e\u003cbr\u003eFlight mode and function:\u003cbr\u003eAttitude mode, GPS mode, AB operation, route operation, one-button return loss control, out of control continue operation, low voltage protection, fence function, log storage function, landing lock function, no-fly zone function, vibration protection function, star protection function, active noise reduction function, motor sequence detection function, direction detection function, dual pump mode, drug break protection function, precision spray, water pump switch control, water pump linkage control\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eHardware Specifications:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003eWeight:\u003cbr\u003e- Total net weight: 321g\u003cbr\u003e- FC: 87g\u003cbr\u003e- PMU: 41g\u003cbr\u003e- PMU2 (UPS): 44g\u003cbr\u003e \u003cbr\u003eSizes:\u003cbr\u003e- FC: 72.6mm x 48.0mm x 22.8mm\u003cbr\u003e- PMU: 53.4mm x 34.4mm x 14.5mm\u003cbr\u003e- PMU2 (UPS): 53.4mm x 34.4mm x 14.5mm\u003cbr\u003e- GPS: 62*14.3mm\u003cbr\u003e- LED: 24*24*8mm\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- 1 x Set of Flight Controller\u003cbr\u003e\u003c\/p\u003e","brand":"Jiyi","offers":[{"title":"Default Title","offer_id":40825838108721,"sku":"67768","price":389.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077207048241_watermarked_0.jpg_0.png?v=1767952424"},{"product_id":"drone-radar-terrain-following-radar-perfect-for-diy-agricultural-plant-protection-spray-drones","title":"Drone Radar Terrain Following Radar Perfect For DIY Agricultural Plant Protection Spray Drones","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Terrain Radar\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: The terrain radar option does not have a HUB module because we will change the connector of the terrain radar so that it can be connected to the flight controller.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825838239793,"sku":"67769","price":294.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077207179313_watermarked_0.jpg_0.png?v=1767952409"},{"product_id":"obstacle-avoidance-radar-with-hub-module-for-diy-agricultural-plant-protection-spray-drones","title":"Obstacle Avoidance Radar with HUB Module For DIY Agricultural Plant Protection Spray Drones","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Obstacle Avoidance Radar with HUB Module\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 563px;\" src=\"https:\/\/www.byimg.com\/catalog\/67770\/67770-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40825838338097,"sku":"67770","price":294.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077207244849_watermarked_0.jpg_0.png?v=1767952401"},{"product_id":"happymodel-crazybee-f4-pro-v3-0-2-4s-flight-controller-esc-w-flysky-receiver-for-larva-x-fpv-drone","title":"Happymodel Crazybee F4 Pro V3.0 2-4S Flight Controller ESC w\/ Flysky Receiver for Larva X FPV Drone","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eFlysky Version: \u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003eCrazybee F4FS PRO V3.0 Firmware target\u003cbr\u003eBuilt-in SPI Flysky receiver with telemetry (AFHDS\/AFHDS2A switchable)\u003cbr\u003e\u003cbr\u003eMCU: STM32F411CEU6 (100MHZ, 512K FLASH)\u003cbr\u003eSensor: MPU-6000(SPI connection)\u003cbr\u003eBoard size: 28.5*28.5mm\u003cbr\u003ePower supply: 2-4S battery input (DC 7-17V)\u003cbr\u003eBuilt-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready\u003cbr\u003e\u003cbr\u003eBuilt-in Betaflight OSD(SPI Control)\u003cbr\u003eBuilt-in Current meter Max 70A\u003cbr\u003eCurrent meter scale set to 470\u003cbr\u003eBuilt-in 5V 1A BEC\u003cbr\u003eBuilt-in voltage detection\u003cbr\u003e\u003cbr\u003eMCU upgraded to EFM8BB21\u003cbr\u003ePower supply: 2-4S LiPo\/LiPo HV (7V\/17V)\u003cbr\u003eCurrent: 10A continuous peak 12A (5 seconds)\u003cbr\u003eSupport BLHeliSuite programmable\u003cbr\u003eFactory firmware: F_H_40_REV16_5.HEX\u003cbr\u003eDefault protocol: DSHOT600\u003cbr\u003e\u003cbr\u003eSPI BUS receiver\u003cbr\u003eProtocol: AFHDS and AFHDS-2A Switchable\u003cbr\u003eChannels: 8CH (AFHDS) or 14CH (AFHDS-2A)\u003cbr\u003eNo ground interference ( transmitter and receiver 1 m from the ground): 300m\u003cbr\u003eFailsafe support\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage List:\u003c\/b\u003e\u003cbr\u003e1 x Flight Controller \u003cbr\u003e1 x Accessories Kit  \u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/68428\/68428-01.jpg\"\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/68428\/68428-02.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Happymodel","offers":[{"title":"Default Title","offer_id":40826053132337,"sku":"68428","price":58.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077262884913_watermarked_0.jpg_0.png?v=1767942193"},{"product_id":"cuav-can-pdb-v2-5-multifunctional-autopilot-baseboard-x7-pro-core-autopilot-flight-controller","title":"CUAV CAN PDB V2.5 Multifunctional Autopilot Baseboard + X7 Pro Core Autopilot Flight Controller","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eCAN PDB is a new integrated flight controller carrier board of CUAV, which combines the functions of the flight control carrier board and the power distribution board. When it is combined with CORE, it can provide automatic driving functions for UAVs\/unmanned vehicles\/unmanned ships and other equipment, and at the same time provide 10 redundant main power supplies, 5V\/6A and 12V\/4A power output.\u003cbr\u003e\u003cbr\u003eWhether it is circuit design or hardware work materials, CAN PDB is the leader in flight controller carrier boards and power distribution boards. Thanks to the ultra-thick copper and thick tinned PCB, it can provide up to 180A of continuous working current for any device. The self-developed TTI algorithm achieves 0.1A current and 0.05V voltage measurement accuracy comparable to precision instruments.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Functions of the Product:\u003c\/b\u003e\u003cbr\u003e1. Support 10~62V ultra-wide voltage input\u003cbr\u003e2. Continuous current: 180A\u003cbr\u003e3. Accurately measure voltage and current, current accuracy within 110A is 0.1A, voltage accuracy is 0.05V\u003cbr\u003e4. 14 servo channel output\u003cbr\u003e5. Dual regulated output interface: It can provide up to 5V\/6A, 12V\/4A power output for peripherals\u003cbr\u003e6. Ultra-thick copper and thick tin-plated PCB can effectively reduce the heating caused by the internal resistance of the circuit under high current\u003cbr\u003e7. Power indicator LED, visually indicating Lipo voltage status\u003cbr\u003e8. Ultra low pressure drop 10 main power output\u003cbr\u003e9. Future upgrades support more functions such as high-precision power consumption statistics and transient power consumption push\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003cbr\u003e- Excellent heat dissipation and current-carrying capacity: ultra-thick copper layer PCB brings excellent current-carrying capacity, window tinning reduces internal resistance and improves heat dissipation capacity\u003cbr\u003e- 78W UBEC regulated output: Generally, the UBEC of the distribution board only has a regulated output of 1-2A, and the CAN PDB can provide a regulated output of up to 5V\/6A and 12V\/4A\u003cbr\u003e\u003cbr\u003e\u003cb\u003eHardware Parameters:\u003c\/b\u003e\u003cbr\u003e- Processor: STM32F412 100Mhz 512K Flash 256K RAM\u003cbr\u003e- Input voltage: 10-62V (3-15SLipo)\u003cbr\u003e- Accurate measurement current range: 0-110A\u003cbr\u003e- Maximum current range: 0-180A\u003cbr\u003e- 5V regulated output: maximum 6A, stable 5A\u003cbr\u003e- 12V regulated output: Maximum 4A, stable 3.5A\u003cbr\u003e- Number of servo channels: 14\u003cbr\u003e- Remote control receiver signal: support PPM\/SBUS\/DSM signal input\u003cbr\u003e- Support CORE: V5+\/X7\/X7 PRO CORE\u003cbr\u003e- Model: Support fixed wing\/3-8 rotor\/helicopter\/VTOL vertical take-off and landing\/unmanned vehicle\/unmanned boat, etc.\u003cbr\u003e- Firmware: For ArduPilot firmware 4.0.0 and above Px4, native firmware 1.11.0 and above\u003cbr\u003e- Working temperature: -20 to 100℃\u003cbr\u003e- Product size: 12cm(length) x 10cm(width)x 1.2cm(height)\u003cbr\u003e- Weight: 163g (including wire weight)\u003cbr\u003e- Wire length: 30cm (excluding terminal)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMain Interface:\u003c\/b\u003e\u003cbr\u003e- USB interface: 1 (type-c)\u003cbr\u003e- UART serial port: 5 (including gps\/uart4\/telem1\/telem2\/debug)\u003cbr\u003e- CAN standard bus: 2\u003cbr\u003e- I2C bus: 3\u003cbr\u003e- SBUS\/DSM IN: 1 (DuPont head)\u003cbr\u003e- PPM_IN: 1\u003cbr\u003e- PWM output: 14 (DuPont head)\u003cbr\u003e- ADC3.3: 1\u003cbr\u003e- ADC6.6: 1\u003cbr\u003e- SBUS OUT:\u003cbr\u003e- RSSI: 3.3V analog voltage (this interface is invalid when using X7\/X7 pro core)\u003cbr\u003e- DSU7:1 \u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included (For CAN PDB X7 Pro Core):\u003c\/b\u003e\u003cbr\u003e- 1 x CAN PDB V2.5\u003cbr\u003e- 1 x X7 Pro Core\u003cbr\u003e- 1 x 16G SD Card\u003cbr\u003e- 2 x I2C\/CAN Cables\u003cbr\u003e- 1 x ADC3.3 Cable\u003cbr\u003e- 1 x Pw-Link Module\u003cbr\u003e- 1 x USB-Type C cable\u003cbr\u003e- 1 x CAN Expansion Board\u003cbr\u003e- 1 x RSSI Cable (x7 series)\u003cbr\u003e- 2 x Power Cords 12\/5V Output\u003cbr\u003e- 1 x Dupont Cable\u003cbr\u003e- 1 x PPM Signal Cable\u003cbr\u003e-6 x Hexagon Socket Screws M2*6 with Gaskets\u003cbr\u003e-8 x Hexagon Socket Screws M3*8\u003cbr\u003e- 1 x Acrylic Isolation Board\u003cbr\u003e- 4 x M3*12 Nylon Column Male Head\u003cbr\u003e- 4 x M3*12 Nylon Column Female Head\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote:\u003cbr\u003e- Battery is not included.\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/71499\/71499-01.jpg\" style=\"width: 1000px;\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40826309050417,"sku":"71500","price":1290.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077405294641_watermarked_0.jpg_0.png?v=1767905497"},{"product_id":"cuav-neo-3-pro-can-gnss-module-for-u-blox-m9n-can-bus-gps-module-open-source-pixhawk-flight-control","title":"CUAV NEO 3 Pro CAN GNSS Module For U-Blox M9N CAN BUS GPS Module Open Source Pixhawk Flight Control","description":"\u003cp\u003e\u003cb\u003eAdvantages:\u003c\/b\u003e\u003cbr\u003e- NEO 3 Pro GNSS satellite navigation module\u003cbr\u003e- New generation satellite receiver for Ublox M9N\u003cbr\u003e- Positioning accuracy up to 0.7M\u003cbr\u003e- Supports simultaneous reception of signals from four major satellite systems\u003cbr\u003e- UAVCAN bus communication\u003cbr\u003e\u003cb\u003e\u003cbr\u003eDescription:\u003c\/b\u003e\u003cbr\u003eNEO 3 Pro has a built-in STM32F4 processor, a UAVCAN protocol communication interface, a brand-new positioning module for Ublox NEO M9N and an industrial-grade RM3100 electronic compass, and supports simultaneous reception by Beidou, Galileo, GLONASS, and GPS satellite systems, with a horizontal positioning accuracy of up to 0.7M. It also integrates safety switches, buzzers, RGB surround lights, altimeters, etc.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Buzzer prompt\u003cbr\u003e- Safety switch\u003cbr\u003e- CAN bus\u003cbr\u003e- Barometer\u003cbr\u003e- RGB status light\u003cbr\u003e- Industrial grade electronic compass\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMore Details:\u003c\/b\u003e\u003cbr\u003e- Satellite receiver for Ublox M9N: The actual measurement can reach a maximum accuracy of 0.7m\u003cbr\u003e- Industrial grade sensor RM3100, better anti-interference performance\u003cbr\u003e- Beidou and Galileo satellite systems: Concurrent reception of GPS, GLONASS, Beidou and Galileo satellite systems\u003cbr\u003e- For CROCOMM custom antenna: Special four-star high gain antenna\u003cbr\u003e- Built-in high-precision barometer: Built-in MS5611 high-precision barometer to meet the needs of different application scenarios\u003cbr\u003e- Triple filtering design: NEO 3 Pro adopts SAW+LNA+SAW triple filtering design, which effectively\u003cbr\u003eavoids the influence of remote control, digital transmission, and 4G signals on GPS positioning reception\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x NEO 3 Pro Module\u003cbr\u003e- 1 x GPS Stand\u003cbr\u003e- 1 x CAN Connection Cable\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/71511\/71511-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/71511\/71511-02.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40826309410865,"sku":"71511","price":198.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077405655089_watermarked_0.jpg_0.png?v=1767905350"},{"product_id":"cuav-neo-3-gnss-gps-module-cable-25cm-four-satellite-receiver-for-apm-px4-open-source-flight-control","title":"CUAV NEO 3 GNSS GPS Module Cable 25CM Four Satellite Receiver For APM PX4 Open Source Flight Control","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Buzzer prompt\u003cbr\u003e- Safety switch\u003cbr\u003e- Industrial grade electronic compass\u003cbr\u003e- Barometer\u003cbr\u003e- RGB status light\u003cbr\u003e- Customized antenna for CROCOMM\u003cbr\u003e- Satellite receiver for Ublox M9N. The actual measurement can reach a maximum accuracy of 0.7m\u003cbr\u003e- Concurrent reception of Beidou, Galileo, GLONASS and GPS satellite systems\u003cbr\u003e- Triple filtering design. NEO 3 adopts SAW+LNA+SAW triple filtering design, which effectively\u003cbr\u003eavoids the influence of remote control, digital transmission, and 4G signals on GPS positioning reception\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of NEO 3 GNSS GPS Module\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/71512\/71513-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/71512\/71513-02.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40826312851505,"sku":"71514","price":118.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077405818929_watermarked_0.jpg_0.png?v=1767905317"},{"product_id":"cuav-can-pmu-uavcan-bus-digital-precisely-detect-voltage-current-apm-px4-open-source-for-v5-x7","title":"CUAV CAN PMU\/UAVCAN Bus Digital Precisely Detect Voltage Current APM\/PX4 Open Source For V5\/X7","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eCAN PMU is a UAV power management unit module with built-in STM32F4 processor and running CUAV ITT algorithm. It can accurately measure UAV voltage and current in real time. It can support 6-62V voltage and 110A current at maximum, and can output 5.4V 8A. The flight controller is powered by CAN bus communication and supports the standard UAV CAN protocol. Each PMU unit is factory calibrated to ensure good consistency and high accuracy.\u003cbr\u003e  \u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Digital communication, safe and reliable. CAN PMU adopts standard UAVCAN digital communication protocol. All information is transmitted digitally to avoid error problems caused by traditional ADCs that are easily susceptible to attenuation and interference.\u003cbr\u003e- Accurate power consumption estimates. Internally through real-time sampling of more than 100HZ and real-time statistics of power consumption \/ instantaneous power consumption, pass accurate power consumption information to the flight controller to achieve a safer and controllable flight.\u003cbr\u003e- Low EMI, 5A high current regulated output. Built-in voltage regulator uses LT8645S chip, supports 62V input, 5.4V \/ 5A * synchronous step-down voltage regulator, has ultra-low EMI and EMC, up to 95% conversion efficiency, meets the industry drone flight control peripherals, and power consumption Big application needs. Attention: The maximum instantaneous output circuit is 8A, and the maximum continuous output current is 5A.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/69167\/69167-06.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CUAV","offers":[{"title":"Default Title","offer_id":40826343129137,"sku":"69167","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077421547569_watermarked_0.jpg_0.png?v=1767898751"},{"product_id":"hobbywing-xrotor-flight-controller-f7-for-dji-image-transmission-system-compatible-with-quadcopters","title":"Hobbywing XRotor Flight Controller F7 For DJI Image Transmission System Compatible With Quadcopters","description":"\u003cp\u003e\u003cb\u003eOverview:\u003c\/b\u003e\u003cbr\u003eSuper hardware and running speed\u003cbr\u003eEquipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.\u003cbr\u003e\u003cbr\u003eSpecial interface for DJI image transmission system\u003cbr\u003eWith image transmission system port for DJl, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.\u003cbr\u003e\u003cbr\u003eOn-board 5V \u0026amp; 12Vdual BEC circuit\u003cbr\u003eFMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.\u003cbr\u003e\u003cbr\u003eOn-board Pit Switch module\u003cbr\u003eFC integrated Pit Switch module can open or close VTx by radio after being adjusted on FC parameter software. Easy and convenient.\u003cbr\u003e \u003cbr\u003ePerfectly support firmware of various FPV\u003cbr\u003eIt support the firmware for BetaFlight, Cleanflight, Butterlight, inva and other mainstream FPV, and can use corresponding parameter adjustment software to adjust various parameters, making the FC more suitable for various FPV flight and race.\u003cbr\u003e\u003cbr\u003eUnique installation design and shock absorption structure\u003cbr\u003eThe double hole distance mounting hole design (30*30MM \u0026amp; 20*20MM) can adapt to different frames. The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC), and the shock absorption mechanism of instillation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate.\u003cbr\u003e\u003cbr\u003ePerfectly match with Hobbywing\u003cbr\u003eMatch with Hobbywing tower 4in1 ESC, easy to install and wire. The appearance is more beautiful.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Product Name: XRotor Flight Controller F7\u003cbr\u003e- Product Number: 31003002\u003cbr\u003e\u003cbr\u003eBasic Features:\u003cbr\u003e- Compatible with (Multirotors): Quadcopters\u003cbr\u003e- Firmware: HOBBYWING_XROTORF7CONV\u003cbr\u003e- FC Programming: Supported\u003cbr\u003e- Programming via: For Betaflight\/Cleanflight-configurator\u003cbr\u003e- Compatible with (Modes): PWM, Oneshot 125, Oneshot 42, Multishot, Dshot150, Dshot300, Dshot600, PROSHOT1000\u003cbr\u003e- Compatible with (Transmitters): For PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL\u003cbr\u003e- OSD: Built-in\u003cbr\u003e- Voltage Monitoring: Supported\u003cbr\u003e- Current Monitoring: Supported\u003cbr\u003e- External Buzzer: Supported\u003cbr\u003e- LED Control: Supported\u003cbr\u003e- BEC: 5V at 1.5A; 10V at 1.5A\u003cbr\u003e- USB Port: Micro USB\u003cbr\u003e\u003cbr\u003eSize \u0026amp; Weight:\u003cbr\u003e- Size: 32x32mm\u003cbr\u003e- Weight: 3.3g\u003cbr\u003e\u003cbr\u003eApplications:\u003cbr\u003e- For 300mm above FPVs\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Flight Controller\u003cbr\u003e\u003c\/p\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":40826344308785,"sku":"71789","price":33.32,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077422727217_watermarked_0.jpg_0.png?v=1767898214"},{"product_id":"hobbywing-xrotor-micro-40a-20x20-6s-4-in-1-esc-amp-fc-f7-flight-controller-combo-for-100-300mm-fpvs","title":"Hobbywing XRotor Micro 40A (20x20) 6S 4 IN 1 ESC and FC F7 Flight Controller Combo For 100-300MM FPVs","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eIntroduction:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e- Product Number: 38040303\u003cbr\u003e- ESC: XRotorMicro40A (20x20) 6S 4in1 ESC\u003cbr\u003e- FC: XRotor Flight Controller F7\u003cbr\u003e- Applications: 100-300mm FPVs\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e- 1 x Set of ESC \u0026amp; Flight Controller\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003e\u003cbr\u003eXRotor Micro 40A (20x20) BLHeli_32 4in1 DShot1200:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eOverview:\u003c\/b\u003e\u003cbr\u003eHighly Integrated \u0026amp; Compact\u003cbr\u003eXRotor Micro 40A 4in1 ESC features 32bit MCU and 3rd-generation BLHeli-32 firmware, handles 6S up to 40A per channel. The built-in voltameter module which allows FC to monitor power supply volt \u0026amp; amp in real time. With this 20x20 ESC makes your electronic stack smaller and be able to shave some grams.\u003cbr\u003e \u003cbr\u003eHigh Quality Hardware\u003cbr\u003eHigh performance 32bit for ARM MCU can run at 48MHz.3IN1IC drive. Imported mosfet and ceramic capacitor. 3 ounces of copper, 8 layers. Greatly reduce heat. More efficient.\u003cbr\u003e\u003cbr\u003eBLHeli-32 Firmware Ready\u003cbr\u003eThe ESC flashed with the 3rd-generation BLHeli-32 firmware has great performance \u0026amp; rich functions and supports adjusting parameters or upgrading firmware via different ways (i.e. via throttle signal wire with using other development board or a FC flashed with the firmware for Clean fight\/Beta flight).\u003cbr\u003e\u003cbr\u003eUnique Soft Mount\u003cbr\u003eThe soft mounts prevent vibrations from being transferred to the FC. Soft wiring and welder pads for the best possible connection.\u003cbr\u003e\u003cbr\u003eDShot1200 Ready\u003cbr\u003eBesides the regular PWM mode, Oneshot125\/Oneshot42\/Multishot modes, DShot150\/300\/600 modes, the latest DShot1200 mode is also supported. In DShot1200mode, the ESC has great anti-interference performance and rapid response.\u003cbr\u003e\u003cbr\u003eHardware Generated PWM\u0026amp; Damped Light Mode\u003cbr\u003eThe ESC firmware uses hardware generated motor pwm for smooth throttle response and silent operation. Damped light does regenerative breaking, causing very fast motor retardation, and it inherently also does active freewheeling.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Product Name: XRotor Micro 40A (20x20) BLHeli_32 4in1 DShot1200\u003cbr\u003e- Product Number: 30902045\u003cbr\u003e- Cont.\/Peak Current: 40Ax4\/60Ax4\u003cbr\u003e- Input Voltage: 3-6S Lipo\u003cbr\u003e- BEC output: NO\u003cbr\u003e\u003cbr\u003eWires \u0026amp; Connectors:\u003cbr\u003e- Input Wires: Red-14AWG-100mm\/Black-14AWG-100mm\u003cbr\u003e- Output Wires: No wires but solder tabs\u003cbr\u003e- Input Connectors: XT60 plug enclosed with package\u003cbr\u003e- Output Connectors: No\u003cbr\u003e- Note: All the wire length above is the original length not the length you see from the outside\u003cbr\u003e\u003cbr\u003eFeatures:\u003cbr\u003e- Firmware: Hobbywing_X Rotor_BLHeli-32 Version\u003cbr\u003e- ESC Programming: BLHeliSuite32\u003cbr\u003e- Stick Programming: Supported\u003cbr\u003e- DEO: Supported\u003cbr\u003e- Throttle Range Calibration: Supported\u003cbr\u003e- Oneshot125Mode: Supported\u003cbr\u003e- Oneshot42 Mode: Supported\u003cbr\u003e- MultiShot Mode: Supported\u003cbr\u003e- DShot150\/300\/600\/1200: Supported\u003cbr\u003e- Timing: Supported\u003cbr\u003e- Motor Rotation: Supported\u003cbr\u003e\u003cbr\u003eSize \u0026amp; Weight:\u003cbr\u003e- Size: 40x33x5mm\u003cbr\u003e- Weight: 12g\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eXRotor Flight Controller F7:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eOverview:\u003c\/b\u003e\u003cbr\u003eSuper hardware and running speed\u003cbr\u003eEquipped with STM32F722 MCU which has powerful computing ability and fast running speed, and high sensitivity ICM20602 six-axis motion sensor. It can perfectly support bidirectional DShot digital throttle communication. The integrated OSD chip can adjust and set each OSD parameters in FC parameter adjustment software and radio, which is simple and convenient. On-board large capacity flash memory chip can record and store more flight logs, which is convenient for users to debug aircraft based on flight data.\u003cbr\u003e\u003cbr\u003eSpecial interface for DJI image transmission system\u003cbr\u003eWith image transmission system port for DJl, equipped with corresponding flat cable (FC has been equipped), can avoid welding, realize plug and play.\u003cbr\u003e\u003cbr\u003eOn-board 5V \u0026amp; 12Vdual BEC circuit\u003cbr\u003eFMU integrates with 12V BEC circuit. It can supply super power output for image transmission and 12V LED devices.\u003cbr\u003e\u003cbr\u003eOn-board Pit Switch module\u003cbr\u003eFC integrated Pit Switch module can open or close VTx by radio after being adjusted on FC parameter software. Easy and convenient.\u003cbr\u003e \u003cbr\u003ePerfectly support firmware of various FPV\u003cbr\u003eIt support the firmware for BetaFlight, Cleanflight, Butterlight, inva and other mainstream FPV, and can use corresponding parameter adjustment software to adjust various parameters, making the FC more suitable for various FPV flight and race.\u003cbr\u003e\u003cbr\u003eUnique installation design and shock absorption structure\u003cbr\u003eThe double hole distance mounting hole design (30*30MM \u0026amp; 20*20MM) can adapt to different frames. The unique flexible flat cable connection mode (The effect is better with hobbywing tower 4in1 ESC), and the shock absorption mechanism of instillation hole, can effectively reduce the impact of external vibration on FC high-sensitivity components, and make the flight more stable and accurate.\u003cbr\u003e\u003cbr\u003ePerfectly match with Hobbywing\u003cbr\u003eMatch with Hobbywing tower 4in1 ESC, easy to install and wire. The appearance is more beautiful.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Product Name: XRotor Flight Controller F7\u003cbr\u003e- Product Number: 31003002\u003cbr\u003e\u003cbr\u003eBasic Features:\u003cbr\u003e- Compatible with (Multirotors): Quadcopters\u003cbr\u003e- Firmware: HOBBYWING_XROTORF7CONV\u003cbr\u003e- FC Programming: Supported\u003cbr\u003e- Programming via: For Betaflight\/Cleanflight-configurator\u003cbr\u003e- Compatible with (Modes): PWM, Oneshot 125, Oneshot 42, Multishot, Dshot150, Dshot300, Dshot600, PROSHOT1000\u003cbr\u003e- Compatible with (Transmitters): For PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL\u003cbr\u003e- OSD: Built-in\u003cbr\u003e- Voltage Monitoring: Supported\u003cbr\u003e- Current Monitoring: Supported\u003cbr\u003e- External Buzzer: Supported\u003cbr\u003e- LED Control: Supported\u003cbr\u003e- BEC: 5V at 1.5A; 10V at 1.5A\u003cbr\u003e- USB Port: Micro USB\u003cbr\u003e\u003cbr\u003eSize \u0026amp; Weight:\u003cbr\u003e- Size: 32x32mm\u003cbr\u003e- Weight: 3.3g\u003cbr\u003e\u003c\/p\u003e","brand":"Hobbywing","offers":[{"title":"Default Title","offer_id":40826344341553,"sku":"71790","price":72.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077422759985_watermarked_0.jpg_0.png?v=1767898205"},{"product_id":"happymodel-elrsf4-2g4-aio-5-in-1-flight-control-built-in-spi-2-4ghz-elrs-drone-receiver-kit","title":"Happymodel ELRSF4 2G4 AIO 5-In-1 Flight Control Built-in SPI 2.4GHz ELRS Drone Receiver Kit","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe world’s first AIO 5in1 F4 flight controller with integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrates SPI controlled 2.4GHz ExpressLRS receiver, Dshot protocol 4-in-1 ESC, 5.8GHz 40ch video transmitter and OSD for Betaflight. Ultra-small size and ultra-stable remote control range can improve the range of the original SPI receiver. And because the 2.4GHz ExpressLRS receiver is equipped with the SX1280 radio frequency chip with high sensitivity, high packet rate and low latency, this flight controller is the one that all Race\/Freestyle pilots needed. It is suitable for use in Tiny whoop Race or Toothpick Freestyle, and can also be used in 1S ultra-lightweight Nano Long Range platform.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cu\u003eFlight Controller:\u003c\/u\u003e\u003cbr\u003e- MCU: STM32F411CEU6 (100MHZ, 512K FLASH)\u003cbr\u003e- Sensor: MPU-6000 (SPI connection)\u003cbr\u003e- Original whoop size compatible\u003cbr\u003e- Power supply: 1S battery input (DC 2.9V-4.35V)\u003cbr\u003e- Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready\u003cbr\u003e- Built-in Betaflight OSD (SPI Control)\u003cbr\u003e- Built-in 5.8G VTX\u003cbr\u003e- Built-in SPI ExpressLRS 2.4GHz receiver\u003cbr\u003e- Built-in 5V 1A BECFlight controller firmware target: CRAZYBEEF4SX1280\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard 4in1 ESC:\u003c\/u\u003e\u003cbr\u003e- MCU upgraded to EFM8BB21\u003cbr\u003e- Power supply: 1S LiPo\/LiPo HV Current: 5A continuous peak 6A (3 seconds)\u003cbr\u003e- Support programmable\u003cbr\u003e- Factory firmware: O_H_5_REV16_8.HEX\u003cbr\u003e- Default protocol: DSHOT600\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard SPI ExpressLRS 2.4GHz Receiver:\u003c\/u\u003e\u003cbr\u003e- Packet Rate option: 25Hz\/50Hz\/150Hz\/250Hz\/500Hz\u003cbr\u003e- RF Frequency: 2.4GHzAntenna: SMD antenna\u003cbr\u003e- Telemetry output Power: \u0026lt;12dBmReceiver protocol: SPI ExpressLRS could bind with Happymodel ES24TX, ES24TX Lite, ES24TX Slim and DIY 2.4GHz ELRS TX module (need to flash the same version ELRS firmware)\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard 5.8g VTX:\u003c\/u\u003e\u003cbr\u003e- Output power: 25mw~200mw switchable\u003cbr\u003e- Frequency: 40CH\u003cbr\u003e- Input voltage: 3.3V 5.5V\u003cbr\u003e- Current consumption: 300mA(type)\u003cbr\u003e- Frequency: 5.8GHz 5bands 40 channels (include Race band) Smartaudio ready\u003cbr\u003e\u003cbr\u003e\u003cu\u003eOnboard voltage and Amperage meters settings:\u003c\/u\u003e\u003cbr\u003e- Voltage meter scale setting 110\u003cbr\u003e- Amperage meter scale setting 1175\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Receiver\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Batteries are not included.\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003eBind Procedure:\u003c\/b\u003e\u003cbr\u003e1. Power the flight controller by connecting USB. Please make sure that the port driver of the flight controller is correctly installed on the computer, then open Betaflight Configurator(Latest version) to connect, enter to the “receiver” interface, and then click “Bind Receiver”, the red LED at the bottom of the flight controller will flash quickly, which means that the SPI ELRS receiver enters the bind mode. There is another way to make the receiver enter the bind mode: after connecting to the Betaflight configurator, move to the CLI interface and enter “bind_rx” in the command line.\u003cbr\u003e2. After correctly connecting the ES24TX or ES24TX Lite\/Slim module or DIY 2.4G ELRS TX module to your Opentx radio transmitter, copy the latest version of ELRS.LUA file to the SD card in the remote controller. The directory is “SD Card\/Scripts\/tools”, Then run ELRS.LUA and upgrade the specified TX firmware through Wifi, and then click “bind” to link with the SPI ExpressLRS receiver.  The Red LED will blinking slowly, this means the bind is successfully. Note: You need to adjust the Packet Rate to 500Hz from the ELRS interface of your radio controller before binding.\u003cbr\u003e3. After the binding is successful, please re-power for the radio transmitter and then the Red LED at the bottom of the flight controller will getting to be solid, and the telemetry can be received at the same time.\u003cbr\u003e4. The meaning of the LED status of the SPI receiver: the LED is getting to be solid, indicating that the bind is successful or the connection and communication is normal, the LED flashing quickly indicates that the receiver is in binding mode, and the LED flashing slowly indicates that the there is no signal received from the radio controller.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDownload Some Useful Firmware and Tools:\u003cbr\u003e\u003c\/b\u003e\u003ca href=\"http:\/\/www.happymodel.cn\/index.php\/2021\/05\/18\/betaflight-firmware-diff-document-elrs-lua-es24tx-firmware-for-happymodel-elrs-f4-2g4\/\"\u003ehttp:\/\/www.happymodel.cn\/index.php\/2021\/05\/18\/betaflight-firmware-diff-document-elrs-lua-es24tx-firmware-for-happymodel-elrs-f4-2g4\/\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNotes: For Betaflight has not yet released the official firmware that could supports the SPI Expresslrs protocol, the current version is the Beta version(Target: CrazybeeF4SX1280). For Betaflight will update to their official target soon. Please feel free to contact with us if you have any issues with this Beta version Firmware.\u003cbr\u003e\u003cbr\u003ePlease change the \"PID loop frequency\" to \"4KHZ\" , sometimes it would make the SPI receiver not working correct while the value is \"8KHZ\".\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cimg style=\"width: 339px;\" src=\"https:\/\/www.byimg.com\/catalog\/71792\/71794-01.png\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eIf find buzzer is not working , please go to CLI command and enter the following code\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003eset beeper_inversion = ON\u003cbr\u003eset beeper_od = OFF\u003cbr\u003esave\u003cbr\u003e\u003c\/p\u003e","brand":"Happymodel","offers":[{"title":"Default Title","offer_id":40826344505393,"sku":"71794","price":62.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077422923825_watermarked_0.jpg_0.png?v=1767898140"},{"product_id":"grtk-rtk-full-kit-multi-satellite-multi-frequency-gps-centimeter-level-positioning-for-uav-pixhawk","title":"GRTK RTK Full Kit Multi-Satellite Multi-frequency GPS Centimeter-Level Positioning For UAV Pixhawk","description":"\u003cp\u003e\u003cb\u003eGRTK Automatic Route Accuracy Test:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.bilibili.com\/video\/BV1cK4y1R71z\"\u003ehttps:\/\/www.bilibili.com\/video\/BV1cK4y1R71z\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.bilibili.com\/video\/BV1f44y167TB\"\u003ehttps:\/\/www.bilibili.com\/video\/BV1f44y167TB\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eGRTK Static Accuracy Test:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.bilibili.com\/video\/BV1iV411j7M8\"\u003ehttps:\/\/www.bilibili.com\/video\/BV1iV411j7M8\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePerformance Parameters:\u003c\/b\u003e\u003cbr\u003e- Frequency: BDS B1L\/B2L; GPS L1\/L2; GLONASS L1\/L2; Galileo E1\/E5b; QZSS L1\/L2\u003cbr\u003e- Single Point Positioning (RMS): Plane: 1.5m; Elevation: 2.5m\u003cbr\u003e- RTK (RMS): Plane: 1cm+1ppm; Elevation: 1.5cm+1ppm\u003cbr\u003e- Orientation accuracy (RMS): 0.2 degree\/1m baseline\u003cbr\u003e- Input voltage: 7V-60V\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003eMobile End:\u003cbr\u003e- 1 x G-RTK\u003cbr\u003e- 2 x Multi-satellite multi-frequency spiral antennas\u003cbr\u003e- Several cables\u003cbr\u003e\u003cbr\u003eBase Station:\u003cbr\u003e- 1 x G-RTK\u003cbr\u003e- 1 x Multi-satellite multi-frequency spiral antenna\u003cbr\u003e- Several cables\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826363871281,"sku":"71940","price":1047.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077431902257_watermarked_0.jpg_0.png?v=1767894853"},{"product_id":"30m-98-4ft-gps-antenna-cable-timing-antenna-clock-antenna-for-ntp-server-gps-beidou-ii-glonass","title":"30M\/98.4FT GPS Antenna Cable Timing Antenna Clock Antenna For NTP Server GPS Beidou II GLONASS","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e30M\/98.4FT antenna can be connected to clocks and other devices that require GPS signals to provide high-quality GPS signals.\u003cbr\u003e\u003cbr\u003eThe cable length can be extended to more than 100m\/328.1ft. A cable amplifier can be added when cable length exceeds 50m\/164ft.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Frequency Range: \u003cbr\u003e* 1575±5MHz (GPS)\u003cbr\u003e* 1561±4MHz (for Beidou II)\u003cbr\u003e* 1609±8MHz (GLONASS)\u003cbr\u003e- Polarization method: Right-hand circular polarization\u003cbr\u003e- Antenna gain: ≥3.5dB\u003cbr\u003e- Amplifier gain: ≥37dB\u003cbr\u003e- Noise figure: ≤1.5dB\u003cbr\u003e- Reflection loss: -14dB (i.e. standing wave ratio≤1.5)\u003cbr\u003e- P-1: ≥ 10dBm\u003cbr\u003e- Interference suppression: ≥25dB (f0±100MHz)\u003cbr\u003e- Power supply: 3V\/5V DC\u003cbr\u003e- Connector: N type (female) or BNC; SYV-50-3 cable 30m or optional\u003cbr\u003e- Installation method: threaded (M24×1.5) connection\u003cbr\u003e- Volume: Diameter 96 × 126mm\/3.8 x 5\"\u003cbr\u003e- Working temperature: -45℃ to 85℃\u003cbr\u003e- Storage temperature: -50℃ to 90℃\u003cbr\u003e- Humidity: 100%\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Antenna\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826406240305,"sku":"69346","price":65.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077451497521_watermarked_0.jpg_0.png?v=1767888188"},{"product_id":"spiral-antenna-gps-antenna-sma-male-connector-1-4-1-68ghz-perfect-for-satellite-positioning-systems","title":"Spiral Antenna GPS Antenna SMA Male Connector 1.4-1.68GHz Perfect For Satellite Positioning Systems","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eFour-arm spiral structure antenna. It consists of four spiral arms, each of which is an integer multiple of a quarter wavelength. The current amplitudes at the feed ends of the four spiral arms are equal, and phases are sequentially different by 90°. It has a cardioid pattern, good front-to-rear ratio and excellent wide-beam circular polarization characteristics, and is very suitable for use as a receiving antenna for satellite positioning systems.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eTypical Application:\u003c\/b\u003e\u003cbr\u003e- Aerospace, meteorology, positioning, relay and the like.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAntenna Parameters:\u003c\/b\u003e\u003cbr\u003e- Antenna impedance: 50 ohms\u003cbr\u003e- Working frequency band: 1.4-1.68GHz\u003cbr\u003e- Size: 23 x 78 x 1.6mm\/0.9 x 3.1 x 0.06\"\u003cbr\u003e- Product weight: 8.4g\/0.02LB\u003cbr\u003e- Antenna connector: SMA (male)\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Antenna\u003cbr\u003e\u003cbr\u003e\u003cb\u003eS11 Measured Picture:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 640px;\" src=\"https:\/\/www.byimg.com\/catalog\/69488\/69488-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826491535409,"sku":"69488","price":21.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077493211185_watermarked_0.jpg_0.png?v=1767880208"},{"product_id":"mateksys-3901-lox-optical-flow-lidar-sensor-for-f4-f7-flight-controller-fixed-height-hovering-flight","title":"MATEKSYS 3901-LOX Optical Flow Lidar Sensor For F4 F7 Flight Controller Fixed Height Hovering Flight","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- MATEK fixed height special accessories\u003cbr\u003e- With this accessory, stable altitude and hovering flight can be achieved\u003cbr\u003e- The sensor is mini and compact, saving space. Not increase flight weight\u003cbr\u003e- Simple wiring, simple setting, only need to connect TX\/RX\/5V\/GND\u003cbr\u003e- Only support F4 and F7 flight controller for INAV firmware. And the flight controller must have a spare UART port\u003cbr\u003e- Before starting the flight control, make sure that the distance between the sensor and the ground is greater than 2CM\/0.8\"\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Optical meter: PMW3901\u003cbr\u003e- Lidar: VL53L0X\u003cbr\u003e- Interface: UART\u003cbr\u003e- Protocol: for INAV MSP\u003cbr\u003e- Working range: 8cm-200cm\/3.1-78.7\"\u003cbr\u003e- Field of view: 42 degrees (PMW3901), 27 degrees (VL53L0X)\u003cbr\u003e- Minimum illumination: \u0026gt; 60Lux\u003cbr\u003e- Input voltage: 4.5~5.5v\u003cbr\u003e- Power consumption: 40ma\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Optical Flow Lidar Sensor\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:\u003cbr\u003e- Other items pictured are not included in the package, for demonstration purposes only. Thank you for your understanding!\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1400px;\" src=\"https:\/\/www.byimg.com\/catalog\/72882\/72882-04.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"MATEKSYS","offers":[{"title":"Default Title","offer_id":40826601865265,"sku":"72882","price":33.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077536858161_watermarked_0.jpg_0.png?v=1767873916"}],"url":"https:\/\/www.thanksbuyer.com\/de\/collections\/flight-control-gps.oembed?page=11","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}