DIY Kits 1-30MhzHF Radio Balun NXO-100 Magnetic Balance Unbalanc Transformer Converter Unassembled

DIY Kits 1-30MhzHF Radio Balun NXO-100 Magnetic Balance Unbalanc Transformer Converter Unassembled

Manual download link: Click here

NOTICE:
It is DIY KITS  not a finished product. This item's shell no punch holes. Because there are three types of antenna position, M seat are the same, different terminal punch locations. Buyers need according to their own choice of programs to choose punch antenna location.
Warm Reminder: if you need "new 1-30Mhz Shortwave Radio Balun Kit " , please you buy in below link:
http://www.ebay.com/itm/New-HAM-Equipment-1-30Mhz-Shortwave-Radio-Balun-Kit-NXO-100-Magnetic-Balance-/181616198225?
Specification:

Specifications:  
- Circular models: NXO-100
- Circular material: nickel zinc ferrite
- Magnetic conductivity: 100
- Overall dimensions: outer diameter 31 mm *  height 7 mm *  diameter 18 mm
- Center frequency: 15 MHZ
- Application frequency: 1-30 MHZ
- Waterproof Case Size: 65mm * 60mm * 35mm

Description:
This kit uses a low-permeability nickel zinc NXO-100 high-frequency magnetic, high-quality wire, waterproof box package, stainless steel bolts, Q9 seat. Our mature programs, providing high-quality package material and detailed description of the production, the complete elimination of the timidity of the primary radio enthusiasts, lovers can not only master the principle of Barron, but also produced a good performance of the device, to fully enjoy the fun of DIY .Small, field erection gantry can be fixed, portable, waterproof.

It production 1:1, 4:1, 9:1 the package using the the large size NXO-100 magnetic ring and 1 mm in diameter enameled wire, can work in the 1-30MHz shortwave, can withstand high power of 100W-200W, such as magnetic Barron's ideal kit.

Types of antennas: 1: 1, 1: 4, 1: 9 three production program antenna optional, 1: 1 and 1: 9 is three enameled hinge, 1: 4 is two enameled wire.
- 1: 9 balun suitable long-term antenna , with manual or automatic antenna tuner tune-day use.
- 1: 4 balun applicable LOOP antenna to antenna and Winton (200-400Ω).
- 1: 1 balun antenna suitable for bipolar DP (inverted V n V), such as Yagi antenna (40-100Ω).
- Kits include 1.5m wire, please fold to 3 fold, each fold 0.5m.
- 1: 1 winding method: three-wire twisted around 7 laps, stranding extent (about 3-4 times per centimeter)
- 1: 4 Winding method: two-wire twisted around 8 laps, stranding extent (about 3-4 times per centimeter)
- 1: 9 Winding method: three-wire twisted around 10 laps, stranding extent (about 3-4 times per centimeter)

Note:
- After stranding, first put heat shrinkable sleeve, and then pass on the ring! Enameled two leaving enough length, a good number of laps around a specified, will be evenly distributed on the magnetic coil, and then start welding enameled wire header and tail (as below pictures).
- This suite is not welded, delivery is scattered electronic components, the store display of the finished picture, only Purchase reference.

Package Included:
- 1x  1-30Mhz shortwave radio balun kit