Electronic Guitar Effects Pedal Stereo Chorus Single Effects Pedal Support the Integration of Chorus and Vibrato

Electronic Guitar Effects Pedal Stereo Chorus Single Effects Pedal Support the Integration of Chorus and Vibrato

Knobs Description:
- Turn the d_c_v (belonging to the dry-wet signal ratio) knob to the 12 o'clock position to get the voice DCV knob of the mono chorus.
- The DCV knob sets the ratio of wet and dry signals through Juliana's mono. Set the knob around noon to hear the traditional single chorus sound. The pitch trill can be found in the whole clockwise position. The ground in the middle provides a unique combination of chorus and vibrato, which is not common on other chorus pedals.
- When both outputs are connected, set the DCV knob to rotate anticlockwise to send the dry sound signal to the mono output and the tremor signal to the stereo output to obtain the traditional stereo chorus sound. Turn the DCV knob up slightly to add some vibrato signals to the dry output to change the stereo image and explore other changes.
- The color lamp tap: two feet control the beat speed. If you hold it down, you can get the fastest chorus speed. Once released, return to the original set speed.
- The shift on the left side is the beat speed subdivision switch. When it is played to the top, it is a quarter note, and when it is played to the middle, it is a quarter note triple. The following is an octave.
- The right shift has three modes. The sine wave is broadcasted above, and the triangle wave is broadcasted in the middle. The broadcasted below is also the most powerful                                                                                                                                                                       design of the sea demon chorus, which is a random waveform. (The sine wave and triangle wave are so subtle that they can hardly be heard. The two original versions of the studio are the same. Maybe it's a bug.)
-The jack on the right side from top to bottom is: tap pedal, mono~mono input, stereo~stereo input.
- The jacks on the left side are: power supply 9V100ma internal negative external positive single dedicated power supply; Mono mono output; Stereo stereo output.
- If mono input and dual output are used, please insert the mono hole, and then insert the output into mono and stereo respectively; If mono input and mono output is used, please insert to the mono hole.

Package Included:
- 1 x Guitar Effects Pedal