{"title":"3D Printer \u0026 Parts","description":"","products":[{"product_id":"36v-5a-golf-cart-battery-charger-crows-foot-110v-us-plug-for-star-ez-go-club-car-ds-ezgo-txt-yamaha","title":"36V 5A Golf Cart Battery Charger Crows Foot 110V US Plug for Star Ez Go Club Car DS EZgo TXT Yamaha","description":"\u003cp\u003e\u003cb\u003eHow to Use It:\u003c\/b\u003e\u003cbr\u003eUnplug The Charger if it hasn’t automatically shut off in 14 hours:\u003cbr\u003eThe charger is designed to turn off when the voltage of the battery pack reaches a certain level. I have found that some battery packs don’t always reach the required trigger voltage and the charger remains on in a trickle charge mode.\u003cbr\u003e\u003cbr\u003eIf this happens, unplug the charger from the wall outlet, your cart should be fully charged. Most of the times after the charger has completed a few charge cycles the charger will begin to operate automatically.\u003cbr\u003e\u003cbr\u003eThe charger operating in the manual mode will not harm your battery pack, you will just have to manually disconnect the charger after the required charge time of not more than 14 hours.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e*New and NON OEM Replacement Golf Cart Charger\u003cbr\u003e*This is an Automatic Charger with Trickle Mode in order to not overcharge your batteries and keep them running stronger for longer\u003cbr\u003e*This is a 5A Charger and is designed for overnight charging\u003cbr\u003e*Charging time is usually between 4-6 Hours\u003cbr\u003e*This is a great charger that will not break the bank and that will get your cart up and running once again so you it can spend more time on the golf course than in the garage\u003cbr\u003e*This Will Work With All GOLF CARTS That Have a 36 VOLT SYSTEM as Well as The Crowsfoot Connector Plug (Suitable for Yamaha, Club Car, Star, Taylor Dunn, Ez-Go)\u003cbr\u003e*This is the standard CROWS FOOT Plug that Comes With This Chargers\u003cbr\u003e*You should confirm the plug before you buy it\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Input Voltage: 110V \u003cbr\u003e- Output Voltage: 36V DC \u003cbr\u003e- Output Current: 5A DC \u003cbr\u003e- Input Plug: US Plug \u003cbr\u003e- Charger Plug: Crows Foot Plug\u003cbr\u003e- Recharge Time: 4-6 Hours \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Golf Cart Battery Charger With Crows Foot Plug Cable\u003cbr\u003e- 1 x US Plug Power Supply Cable \u003cbr\u003e- 1 x Manual \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: Please note that our charger is suitable for golf cart with battery capacity below 50AH. Thank you! \u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824317804593,"sku":"60298","price":63.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076667293745_watermarked_0.jpg_0.png?v=1768063770"},{"product_id":"3d-printer-3-5-ips-lcd-touch-screen-sapphire-s-power-resume-keep-printing-function","title":"3D Printer 3.5'' IPS LCD Touch Screen Sapphire S Power Resume Keep Printing Function","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e- 1 x 16G U Disk \u003cbr\u003e- 1 x Lerdge Module with Power Resume Function \u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: Please contact us for User Manual after purchasing. Thank you! \u003cbr\u003e\u003c\/b\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-02.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-03.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-05.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-06.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-07.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-08.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-09.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-10.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-11.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-12.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824470274097,"sku":"60871","price":524.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076738891825_watermarked_0.jpg_0.png?v=1768057222"},{"product_id":"3d-printer-sapphire-s-power-resume-keep-printing-auto-leveling-material-shortage-alarm","title":"3D Printer Sapphire S Power Resume Keep Printing+Auto Leveling+Material Shortage Alarm","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e- 1 x 16G U Disk \u003cbr\u003e- 1 x Lerdge Module with Power Resume Function \u003cbr\u003e- 1 x Automatic Leveling Part\u003cbr\u003e- 1 x Material Shortage Alarm Part\u003cbr\u003e\u003cbr\u003e\u003cb\u003eNote: Please contact us for User Manual after purchasing. Thank you!\u003cbr\u003e\u003c\/b\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-03.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-05.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-06.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-07.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-08.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-09.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-10.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-11.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-12.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824470306865,"sku":"60872","price":533.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076738924593_watermarked_0.jpg_0.png?v=1768057211"},{"product_id":"3d-printer-sapphire-s-power-resume-keep-printing-auto-leveling-material-shortage-alarm-base-plate","title":"3D Printer Sapphire S Power Resume Keep Printing+Auto Leveling+Material Shortage Alarm+Base Plate","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e- 1 x 16G U Disk \u003cbr\u003e- 1 x Lerdge Module with Power Resume Function \u003cbr\u003e- 1 x Base Plate \u003cbr\u003e\u003cb\u003e\u003cbr\u003eNote: Please contact us for User Manual after purchasing. Thank you! \u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-02.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-03.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-05.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-06.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-07.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-08.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-09.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-10.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-11.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-12.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-13.jpg\"\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824470569009,"sku":"60873","price":587.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076738990129_watermarked_0.jpg_0.png?v=1768057198"},{"product_id":"3d-printer-sapphire-s-power-resume-keep-printing-auto-leveling-material-shortage-alarm-base-plate-acrylic","title":"3D Printer Sapphire S Power Resume Keep Printing+Auto Leveling+Material Shortage Alarm +Base Plate+Acrylic","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e- 1 x 16G U Disk \u003cbr\u003e- 1 x Lerdge Module with Power Resume Function \u003cbr\u003e- 1 x Automatic Leveling Part \u003cbr\u003e- 1 x Base Plate\u003cbr\u003e- 1 x Material Shortage Alarm Part \u003cbr\u003e\u003cb\u003e\u003cbr\u003eNote: Please contact us for User Manual after purchasing. Thank you! \u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-02.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-03.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-04.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-05.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-06.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-07.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-08.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-09.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-10.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-11.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-12.jpg\"\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201902\/60871-13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824470601777,"sku":"60874","price":642.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076739022897_watermarked_0.jpg_0.png?v=1768057187"},{"product_id":"einscan-se-3d-scanner-fixed-auto-dual-mode-wide-scan-range-0-1mm-standard-version","title":"EinScan-SE 3D Scanner Fixed Auto Dual Mode Wide Scan Range 0.1mm Standard Version","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003eDescription:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e- A Powerful Companion for Desktop 3D Printing Applications\u003cbr\u003e- The Next Innovative Desktop 3D Scanner\u003cbr\u003e- Easiest 3D Scanning Experience for Non-technical Users\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e- Easier Operation, Faster Scanning, User friendliness and Enhanced Efficiency \u003c\/b\u003e\u003cbr\u003eTime needed for a single scan: EinScan-SE 8 s; Time needed for a 360-degree scan under auto-scan mode: EinScan-SE 2 mins.\u003cbr\u003e\u003cb\u003e- Fine Details, Every Scan Generates a High-Quality 3D Data file\u003c\/b\u003e\u003cbr\u003eStructured light 3d scanning technology, great power of reconstruction the real geometry of the object with fine detail.\u003cbr\u003e\u003cb\u003e- Compatible for Communicating with 3D Printer\u003c\/b\u003e\u003cbr\u003eAuto meshing to watertight 3D data, providing high quality 3D data for 3D printer, which can be printed by 3D printer directly. Provide API access service for any brand 3D printers.\u003cbr\u003e\u003cb\u003e- One Click Upload for Online File Saving and Data Sharing\u003c\/b\u003e\u003cbr\u003eSupport third-party data sharing platform for access service; One Click Upload for Online File Archiving and Data Sharing\u003cbr\u003e\u003cb\u003e- Automatic Software\u003c\/b\u003e\u003cbr\u003eAutomatic calibration with no rigid set-up required; One-click scanning; Auto alignment and fusion for direct mesh generation. \u003cbr\u003e\u003cb\u003e- Safety in Use\u003c\/b\u003e\u003cbr\u003eVisible white light, no laser, eyes secure for children.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61032-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61032-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61032-03.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"EinScan","offers":[{"title":"Default Title","offer_id":40824477843505,"sku":"61032","price":1469.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076744233009_watermarked_0.jpg_0.png?v=1768055452"},{"product_id":"dual-laser-3d-scanner-jt-scan-2mp-cmos-image-sensor-usb-interface-for-3d-printer","title":"Dual Laser 3D Scanner JT-scan 2MP CMOS Image Sensor USB Interface for 3D Printer","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe JT-scan Desktop 3D Scanner creates a digital 3D model of a physical object by taking a rapid sequence of pictures as the object rotates on the Sun-scan turntable. Here is how it happens:\u003cbr\u003e1. JT-scan two laser scanner located in the left, right angle to create a laser ray, camera and extract the outline of objects.\u003cbr\u003e2. JT-scan scanner software receives the laser ray provide photos, these photos will create a combination of a point cloud.\u003cbr\u003e3. After the scan is complete, a check 3D grid multi generation Sun-scan scanners, you can modify the 3D modeling software.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Scanning Range: 200mm diameter, 250mm height \u003cbr\u003e- Dual laser scanning to compensate the dead corner;\u003cbr\u003e- High-density scan, a single laser 800 outline, dual laser 1600 contour;\u003cbr\u003e- Dual bright LED lighting, textures and more realistic;\u003cbr\u003e- Multi-angle stitching, make up less than scanning the broken surface;\u003cbr\u003e- Measurement function, facilitate the analysis of measurement.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61034-01.JPG\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Scanner \u003cbr\u003e- 1 x Calibration Board \u003cbr\u003e- 1 x USB 2.0 Cable \u003cbr\u003e- 1 x Power Adapter \u003cbr\u003e- 1 x User Manual \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 690px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61034-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61034-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61034-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61034-05.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824478072881,"sku":"61034","price":1059.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076744298545_watermarked_0.jpg_0.png?v=1768055432"},{"product_id":"handheld-3d-scanner-high-accuracy-einscan-pro-2x-standard-version","title":"Handheld 3D Scanner High Accuracy EinScan Pro 2X Standard Version","description":"\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61035-08.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: Colorful camera is not included in this package. If it is needed, please contact us. \u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"EinScan","offers":[{"title":"Default Title","offer_id":40824478105649,"sku":"61035","price":5702.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076744331313_watermarked_0.jpg_0.png?v=1768055424"},{"product_id":"sla-3d-printer-for-resin-full-kit-form-2-standard-version","title":"SLA 3D Printer for Resin Full Kit Form 2 Standard Version","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eEngineered For Precision. Designed for Reliability.\u003c\/b\u003e\u003cbr\u003e- Slide Peel: Print big, solid parts with lower peel forces and reduced wear on the resin tank.\u003cbr\u003e- Resin Wiper: Improve print consistency by removing any particulates from the build area, properly agitating the resin.\u003cbr\u003e- Heated tank: Achieve optimal print conditions by maintaining a consistent internal temperature of 35 °C.\u003cbr\u003e- Technology: Stereolithography (SLA)\u003cb\u003e\u003cbr\u003eAutomated Resin System.\u003c\/b\u003e\u003cbr\u003e- Level Sensing: Ensures your tank is automatically filled during printing, no more pausing for manual top ups.\u003cbr\u003e- Cartridge ID Chip: Allows you to keep track of resin supplies from your dashboard.\u003cbr\u003e- Open Mode: Lets you continue to experiment with 3rd party resins.\u003cbr\u003e\u003cb\u003eControl at Your Fingertips.\u003c\/b\u003e\u003cbr\u003e- Easily send prints over wifi, reprint previous jobs, and manage your print queue with our new touch screen interface and wireless connectivity.\u003cbr\u003e\u003cb\u003eAlways Connected.\u003c\/b\u003e\u003cbr\u003e- Stay informed wherever you are. Your Printer Dashboard allows you to access your Form 2 from anywhere.\u003cbr\u003e- Connectivity: Ethernet\/USB\/WiFi \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Technology: Stereolithography (SLA)\u003cbr\u003e- Printing Size: 145 x 145 x 175mm\/5.7 x 5.7 x 6.9 Inch (W*D*H)\u003cbr\u003e- Printed Layer Thickness: 0.025\/0.05\/0.1MM\u003cbr\u003e- Printing Accuracy: 0.02-0.05mm \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePhysical Parameters: \u003c\/b\u003e\u003cbr\u003e- Printer Size: 350 x 330 x 520mm\u003cbr\u003e- Printer Weight: 13kg\u003cbr\u003e- Power Adapter: 100-240V, 1.5A, 50\/60Hz, 60W \u003cbr\u003e- Printing Materials: Conventional resin (black\/gray\/white\/transparent), flexible resin, high toughness resin, blue wax, high temperature resistant resin\u003cbr\u003e- Laser: EN 60825-1: 2007 certitied Class1 Lasser Product 405nm violet laser\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSoftware:\u003c\/b\u003e\u003cbr\u003e- Modeling Software: PreForm \u003cbr\u003e- OS: for Win7, Win8, Win 10 and Mac OSX 10.6.8 Above \u003cbr\u003e- File Format: .stl.obj\u003cbr\u003e- Connectivity: Ethernet\/USB\/WiFi \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Form 2 3D Printer \u003cbr\u003e- 1 x Resin \u003cbr\u003e- 1 x Resin Tank \u003cbr\u003e- 1 x Build Plate \u003cbr\u003e- 1 x Full Cleaning Kit \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824478138417,"sku":"61036","price":6446.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076744364081_watermarked_0.jpg_0.png?v=1768055410"},{"product_id":"3d-printer-fully-enclosed-raise-3d-pro2-plus-dual-nozzles-standard-version","title":"3D Printer Fully Enclosed Raise 3D Pro2 Plus Dual Nozzles Standard Version","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Built with camera for remote monitoring \u003cbr\u003e- Dual Nozzles: electronic driven lifting; 4× increased torque performance; diverse filament compatibility (300℃)\u003cbr\u003e- Build Volume: for Single Nozzle: 305 x 305 x 605mm; for Dual Nozzles: 280 x 305 x 605mm; Positioning Accuracy: for XY Axis: 0.0125mm; for Z-Axis: 0.00125mm \u003cbr\u003e- 7 Inch Touch Screen: Graphics interface for easy inspection and adjustable parameter  \u003cbr\u003e- Filament Sensor\/Print recovery after power outage\/ HEPA filter \u003cbr\u003e- Connectivity: 2*USB2.0 Ports, 1*Ethernet Port, WiFi\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePrinter Specifications:\u003c\/b\u003e\u003cbr\u003e- Model: Raise 3D Pro Plus \u003cbr\u003e- Printing Technology: FFF \u003cbr\u003e- Build Volume: for Single Nozzle: 305 x 305 x 605mm; for Dual Nozzles: 280 x 305 x 605mm\u003cbr\u003e- Layer Resolution: Adjustable 0.01-0.3mm \u003cbr\u003e- Filament Size: 1.75mm (Diameter)\u003cbr\u003e- Filament Type: PLA, ABS, PC, FLEX, HIPS, Wood-filled, Nylon, TPU, TPE, Fiber Carbon\u003cbr\u003e- Printing Platform: Heated aluminum base plate, magnetically fixed, can be heated in the range of 0-110°C\u003cbr\u003e- Fully Enclosed: Yes \u003cbr\u003e- Nozzle Diameter: 0.4mm\u003cbr\u003e- Nozzle Quantity: 2pcs \u003cbr\u003e- Nozzle Operating Temperature: 170-300°C\u003cbr\u003e- Positioning Accuracy: for XY Axis: 0.0125mm; for Z-Axis: 0.00125mm \u003cbr\u003e- Filament Sensor: Yes \u003cbr\u003e- Printing Speed: 10-150mm\/s\u003cbr\u003e- Moving Speed: 150-300mm\/s \u003cbr\u003e- Printing Surface: Buildtak \u003cbr\u003e- Heated Build Platform: Yes \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSoftware:\u003c\/b\u003e\u003cbr\u003e- Software: ideaMaker \u003cbr\u003e- Software File Format: .stl.obj\u003cbr\u003e- OS: for Windows, Mac, Linux \u003cbr\u003e- Printer File Format: .gcode \u003cbr\u003e\u003cbr\u003e\u003cb\u003eControl:\u003c\/b\u003e\u003cbr\u003e- Screen: 7Inch LCD Touch Screen \u003cbr\u003e- Screen Pixel: 1024*768\u003cbr\u003e- Motion Controller: ATM Cortex M7.400MHZ FPU\u003cbr\u003e- Logic Controller: Freescale imx6, Quad core 1Ghz ARM Controller \u003cbr\u003e- Memory: 1G\u003cbr\u003e- Flash Memory: 8G\u003cbr\u003e- Control System: for Linux \u003cbr\u003e- Expansion Port: No \u003cbr\u003e- Camera Remote Monitoring: Yes \u003cbr\u003e- Print Recovery: Yes \u003cbr\u003e\u003cb\u003e\u003cbr\u003eSize:\u003c\/b\u003e\u003cbr\u003e- Frame Material: Aluminum \u003cbr\u003e- Shield Materials: ABS, Acrylic, Polycarbonate\u003cbr\u003e- Printer Size: 620 x 590 x1105mm\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePower Supply:\u003c\/b\u003e\u003cbr\u003e- Input: 100-240V AC, 50\/60Hz \u003cbr\u003e- Output: 600W, 24V DC \u003cbr\u003e- Connection Ports: 2*USB2.0 Ports, 1*Ethernet Port, Support WiFi Connection \u003cbr\u003e- Operating Temperature: 15-35℃\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e- Other Accessories (as the picture shown)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61037-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824478171185,"sku":"61037","price":7464.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076744396849_watermarked_0.jpg_0.png?v=1768055396"},{"product_id":"3d-printer-build-volume-305x305x300mm-raised-3d-pro2-dual-nozzles-standard-version","title":"3D Printer Build Volume 305x305x300mm Raised 3D Pro2 Dual Nozzles Standard Version","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Connectivity: 2*USB2.0 Ports, 1*Ethernet Port, WiFi\u003cbr\u003e- Built with camera for remote monitoring \u003cbr\u003e- Dual Nozzles: electronic driven lifting; 4× increased torque performance; diverse filament compatibility (300℃)\u003cbr\u003e- Build Volume: for Single Nozzle: 305 x 305 x 300mm; for Dual Nozzles: 280 x 305 x 300mm; Minimum 0.01mm layer height \u003cbr\u003e- 7 Inch Touch Screen: Graphics interface for easy inspection and adjustable parameter  \u003cbr\u003e- Filament Sensor\/Print recovery after power outage\/ HEPA filter \u003cbr\u003e\u003cbr\u003e\u003cb\u003ePrinter Specifications:\u003c\/b\u003e\u003cbr\u003e- Model: Raise 3D Pro2  \u003cbr\u003e- Printing Technology: FFF \u003cbr\u003e- Build Volume: for Single Nozzle: 305 x 305 x 300mm; for Dual Nozzles: 280 x 305 x 300mm\u003cbr\u003e- Layer Resolution: Adjustable 0.01-0.3mm \u003cbr\u003e- Filament Size: 1.75mm (Diameter)\u003cbr\u003e- Filament Type: PLA, ABS, PC, FLEX, HIPS, Wood-filled, Nylon, TPU, TPE, Fiber Carbon\u003cbr\u003e- Printing Platform: Heated aluminum base plate, magnetically fixed, can be heated in the range of 0-110°C\u003cbr\u003e- Fully Enclosed: Yes \u003cbr\u003e- Nozzle Diameter: 0.4mm\u003cbr\u003e- Nozzle Quantity: 2pcs \u003cbr\u003e- Nozzle Operating Temperature: 170-300°C\u003cbr\u003e- Positioning Accuracy: for XY Axis: 0.0125mm; for Z-Axis: 0.00125mm \u003cbr\u003e- Filament Sensor: Yes \u003cbr\u003e- Printing Speed: 10-150mm\/s\u003cbr\u003e- Moving Speed: 150-300mm\/s \u003cbr\u003e- Printing Surface: Buildtak \u003cbr\u003e- Heated Build Platform: Yes \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSoftware:\u003c\/b\u003e\u003cbr\u003e- Software: ideaMaker \u003cbr\u003e- Software File Format: .stl.obj\u003cbr\u003e- OS: for Windows, Mac, Linux \u003cbr\u003e- Printer File Format: .gcode \u003cbr\u003e\u003cbr\u003e\u003cb\u003eControl:\u003c\/b\u003e\u003cbr\u003e- Screen: 7Inch LCD Touch Screen \u003cbr\u003e- Screen Pixel: 1024*768\u003cbr\u003e- Motion Controller: ATM Cortex M7.400MHZ FPU\u003cbr\u003e- Logic Controller: Freescale imx6, Quad core 1Ghz ARM Controller \u003cbr\u003e- Memory: 1G\u003cbr\u003e- Flash Memory: 8G\u003cbr\u003e- Control System: for Linux \u003cbr\u003e- Expansion Port: No \u003cbr\u003e- Camera Remote Monitoring: Yes \u003cbr\u003e- Print Recovery: Yes \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSize:\u003c\/b\u003e\u003cbr\u003e- Frame Material: Aluminum \u003cbr\u003e- Shield Materials: ABS, Acrylic, Polycarbonate\u003cbr\u003e- Printer Size: 620 x 590 x760mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Supply:\u003c\/b\u003e\u003cbr\u003e- Input: 100-240V AC, 50\/60Hz \u003cbr\u003e- Output: 600W, 24V DC \u003cbr\u003e- Connection Ports: 2*USB2.0 Ports, 1*Ethernet Port, Support WiFi Connection \u003cbr\u003e- Operating Temperature: 15-35℃\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e- Other Accessories (as the picture shown)\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201903\/61037-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824478203953,"sku":"61038","price":5680.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076744429617_watermarked_0.jpg_0.png?v=1768055392"},{"product_id":"3d-printer-uv-lcd-technology-build-volume-74x132x175-mm-inkspire-standard-version","title":"3D Printer UV LCD Technology Build Volume 74x132x175 mm Inkspire Standard Version","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Microscopic Precision: The smallest printing size is 50x50x25 microns\u003cbr\u003e- Consistent Speed: It works at the speed of 20-36mm\/h regardless of how much of the workspace is filled\u003cbr\u003e- Real-Time Setting: It can change the exposure time or rest time of the layer\u003cbr\u003e- UV LCD Technology: It is designed with consistent working speed and high accuracy, compared with SLA and DLP technologies. \u003cbr\u003e- For Mass Production: Every 3D Printer produces 50 to 80pcs parts in 51 minutes. \u003cbr\u003e- Compatible Resins: It comes with original Resin Basic. It can be used with other resins which can be processed with 405nm UV light. \u003cbr\u003e- Application: The 3D Printer is ideal for engineering, short- and medium-sized series manufacturing, and accurate modeling of dental restorations or jewelry designs.\u003cbr\u003e- Z-SUITE Software: For other resins, the parameters are settable manually and can be saved for batch printing. Its UV exposure time for model and supporting structure can be set separately. The printing process can be paused or recovered via remote management. \u003cbr\u003e\u003cb\u003e\u003cbr\u003ePrinting: \u003c\/b\u003e\u003cbr\u003e- Technology: UV LCD\u003cbr\u003e- Pixel size: 50 microns (0.05 mm)\u003cbr\u003e- Layer thickness: 0.025\/0.05\/0.1mm \u003cbr\u003e- Print speed: 20-36 mm\/h\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDevice: \u003c\/b\u003e\u003cbr\u003e- Build volume: 74 x 132 x 175 mm (2.9 x 5.2 x 6.9 in)\u003cbr\u003e- Support: Mechanically removed - printed with the same material as the model\u003cbr\u003e- Light source: UV integrated light (wavelength 405 nm)\u003cbr\u003e- Connectivity: Wi-Fi, Ethernet, USB\u003cbr\u003e- Operating system: for Android\u003cbr\u003e- Processor: Quad Core\u003cbr\u003e- Touch Screen: 4\" IPS 800 x 480\u003cbr\u003e- Available materials: for Zortrax Resin Basic\u003cbr\u003e- External materials: Applicable\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSoftware:\u003c\/b\u003e\u003cbr\u003e- Software bundle: Z-SUITE\u003cbr\u003e- Supported file types: .stl, .obj, .dxf, .3mf, .zcodex\u003cbr\u003e- Supported formats: .cws, .zcodex\u003cbr\u003e- Supported operating systems: for Mac OS X \/ Windows 7 and newer versions\u003cbr\u003e\u003cb\u003e\u003cbr\u003eTemperature:\u003c\/b\u003e\u003cbr\u003e- Ambient operation temperature: 20 - 30°C (68 - 86°F)\u003cbr\u003e- Storage temperature: 0 - 35°C (32 - 95°F)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eElectrical: \u003c\/b\u003e\u003cbr\u003e- AC input: 110V, 5.9A, 50\/60 Hz; 240V, 2.5A, 50\/60 Hz\u003cbr\u003e- Maximum power consumption: 50 W\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e- 1 x Z-SUITE Software \u003cbr\u003e- 1 x Tools Case \u003cbr\u003e- 1 x Resin 500ml \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824478236721,"sku":"61039","price":3866.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076744462385_watermarked_0.jpg_0.png?v=1768055382"},{"product_id":"cr-100-3d-printer-children-printing-size-100x100x80mm-for-1-75mm-filament-professional-diy-uses","title":"CREALITY CR-100 3D Printer Children Printing Size 100x100x80mm for 1.75mm Filament Professional DIY Uses","description":"\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-01.jpg\" style=\"width: 750px;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-02.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-03.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-04.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-05.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-06.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-07.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-08.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-09.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-10.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-11.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-12.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-13.jpg\" style=\"width: 750px;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/201903\/61173-14.jpg\" style=\"width: 750px;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer \u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: Optional Colors: Red, Yellow, Orange, Blue. Please tell us the color you want when purchasing. Thank you! \u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CREALITY","offers":[{"title":"Default Title","offer_id":40824487149617,"sku":"61173","price":196.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076750131249_watermarked_0.jpg_0.png?v=1768054226"},{"product_id":"3d-printing-build-surface-330-330mm-3d-printing-heat-bed-platform-sticker-sheet","title":"Tronxy 3D Printing Build Surface 330*330mm 3D Printing Heat Bed Platform Sticker Sheet","description":"\u003cp\u003e\u003cb\u003eSpecifications:\u003cbr\u003e\u003c\/b\u003e- Brand: Tronxy \u003cbr\u003e- Size: 330 x 330 x 4mm\u003cbr\u003e- Material: Lattic Glass \u003cbr\u003e- Fit for: 3D Printer\u003cb\u003e \u003cbr\u003e\u003cbr\u003ePackage Included:\u003cbr\u003e\u003c\/b\u003e- 1 x 3D Printing Build Surface Sheet \u003cbr\u003e\u003cb\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eNote: Please note that it is not for machines with automatic leveling function.\u003c\/span\u003e \u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201904\/61319-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201904\/61319-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201904\/61319-03.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Tronxy","offers":[{"title":"Default Title","offer_id":40824496029745,"sku":"61319","price":19.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076756324401_watermarked_0.jpg_0.png?v=1768053040"},{"product_id":"3d-desktop-printer-kit-diy-235-235-280mm-w-3-5-quot-touch-screen-support-7-languages-unfinished-sc-10","title":"3D Desktop Printer Kit DIY 235*235*280mm w\/ 3.5\" Touch Screen Support 7 Languages Unfinished SC-10","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Integrated metal body with elegant appearance, enabling quick installation. \u003cbr\u003e- Mute printing. Don't worry about the noise.\u003cbr\u003e- 3.5-inch touch screen ensures easy operation and good human-computer interaction experience.\u003cbr\u003e- Printing Size: 235*235*280mm. Printing Accuracy: ±0.1mm. \u003cbr\u003e- Support 7 languages: English, German, French, Spanish, Italian, Russian and Simplified Chinese.\u003cbr\u003e- Support online or TF offline printing. \u003cbr\u003e- With filament breaking detection function and material shortage alarm.\u003cbr\u003e- Power-off Memory Function: It continues printing when it is powered on again. \u003cbr\u003e- Resume printing from a breaking point.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Model No.: SC-10 \u003cbr\u003e- Engraving Accuracy: 0.1mm\u003cbr\u003e- Frame Material: Aluminum Profile \u003cbr\u003e- Platform Board: Aluminum Alloy + Glass Fiber Board + Platform Sticker \u003cbr\u003e- Nozzle Quantity: 1\u003cbr\u003e- Nozzle Diameter: 0.4mm (Default). Optional: 0.3mm, 0.2mm\u003cbr\u003e- Nozzle Temperature: MAX. 260℃\u003cbr\u003e- Printing Size: 235mm x 235mm x 280mm (L*W*H)\u003cbr\u003e- Layer Thickness: 0.1-0.4mm\u003cbr\u003e- Memory Card Offline Printing: Support TF Card \u003cbr\u003e- LCD Screen: Yes \u003cbr\u003e- Printing Speed: 180mm\/s Max. \u003cbr\u003e- Printing Speed: 180mm\/s Max. \u003cbr\u003e- Supporting material: PLA, ABS,TPU, Wood, Copper-bearing, Gradient, etc.\u003cbr\u003e- Printing Material Diameter: 1.75mm\u003cbr\u003e- Supported Languages: Chinese, English, German, Russian, Spanish, French and Italian\u003cbr\u003e- File Format: STL,Obj, amf\u003cbr\u003e- Model Supporting Function: Yes \u003cbr\u003e- XY-Axis Positioning Accuracy: 0.012mm\u003cbr\u003e- Z-Axis Positioning Accuracy: 0.004mm\u003cbr\u003e- Voltage: 100-120V \/ 200-240V\u003cbr\u003e- Working Power: Input AC 100-120V-6A\/200-240V-3.4A. Output 24V, 14.6A\u003cbr\u003e- Host Computer Software: Support for Repetier-Host, Cura, Simplyfy3D\u003cbr\u003e- Compatible System: Support for XP, WIN7 and MAC\u003cbr\u003e- Voltage Range: 100-120V \/ 200-240V\u003cbr\u003e- Current: 24V, 1460mA\u003cbr\u003e- Connector Type: USB, SD Card, WIFI (WiFi module should be purchased separately)\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of 3D Printer Unfinished \u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: \u003cbr\u003e- It is unfinished and assembling is needed. \u003cbr\u003e- WIFI module is not included in the package. \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cimg style=\"width: 751.167px; height: 602.811px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63405\/63405-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63405\/63405-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750.167px; height: 1389.68px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63405\/63405-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750.454px; height: 1802.97px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63405\/63405-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750.058px; height: 1179.47px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63405\/63405-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/201911\/63405\/63405-06.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824677466161,"sku":"63405","price":446.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076856463409_watermarked_0.jpg_0.png?v=1768020899"},{"product_id":"3d-printer-printing-size-220x220x250mm-automatic-leveling-for-windows-mac-et4-pro-unassembled","title":"3D Printer Printing Size 220x220x250mm Automatic Leveling For Windows MAC ET4 PRO Unassembled","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-08.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-09.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/64691\/64691-10.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e1. Factory pre-assembly, modular installation, can be installed and used in 10 minutes, saving time and heart;\u003cbr\u003e2. The newly upgraded automatic leveling is changed to the photoelectric induction type, which makes the leveling more accurate; \u003cbr\u003e3. It supports the function of power-off and continuous calling, and continues to print after calling, without fear of accidental power-off;\u003cbr\u003e4. With material break detection function, material shortage alarm and pause printing; support automatic feeding and returning function, easy to solve with one key of feeding and refueling;\u003cbr\u003e5. Adopt 2.8-inch color touch screen, easy to operate, good human-computer interaction experience;\u003cbr\u003e6. The motor driver chip is upgraded to tmc2208, replacing a4988256 micro step subdivision, ultra quiet, low resonance, and more delicate printing; the new industrial level chip control motherboard, with fast operation, strong function, with over-current protection, overload protection, temperature out of control protection (directly disconnect the heating switch) and other functions;\u003cbr\u003e7. The printing platform is equipped with aluminum substrate hot bed + toughened glass + PC film. The hot bed heats up rapidly to 100 degrees in 5 minutes. The glass platform makes the model printing smooth and easy to stick and take;\u003cbr\u003e8. Optimized extrusion mechanism, more stable and reliable structure;\u003cbr\u003e9. Optimize the hot bed mechanism: larger size of hand nut, manual leveling is easier and more accurate; use screws to fix the hot bed line to ensure stable and safe heating of the hot bed.\u003cbr\u003e10. Power supply upgrade: adopt international brand power supply mean well to ensure more safe and reliable printing;\u003cbr\u003e11. Offline upgrade function. Copy the upgrade file into the memory card and plug it into the 3D printer to complete the program upgrade.\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of 3D Printer \u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote: Assembling is needed.\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824940757041,"sku":"64691","price":431.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076940152881_watermarked_0.jpg_0.png?v=1768000547"},{"product_id":"3d-printer-kit-w-3-5-quot-touch-screen-printing-size-235x235x320mm-multiple-language-sc-20-unassembled","title":"3D Printer Kit with 3.5\" Touch Screen Printing Size 235x235x320mm Multiple Language SC-20 Unassembled","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e●Super-large space of printing: It can provide the super-large forming size of 235 x 235 x 320mm, giving you more creative space.\u003cbr\u003e●High precision v-wheel drive, silent printing: The v-wheel is made of imported POM, with the advantages of ultra-quiet, high precision and wear resistance.\u003cbr\u003e●Premium power supply: Ensure the safety and low fault of printing.\u003cbr\u003e●Support 7 languages: Support English, French, German, Italian, Russian, Spanish, Chinese, can be switched at will\u003cbr\u003e●Filament shutdown detection: Avoid waste of materials and scrapping of models as the machine is still printing after running out of consumables.\u003cbr\u003e●Self adhesive platform: Easy to stick to the platform without gluing and easy to remove.\u003cbr\u003e●Continue printing after power outage\u003cbr\u003e● 3.5-inch touch screen, simple and convenient\u003cbr\u003e● Metal body design, easy to install\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote: \u003cbr\u003e- Platform material: aluminum alloy + fiberglass board + platform sticker.\u003cbr\u003e- Assembling is needed.  \u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Model: SC-20 \u003cbr\u003e- Molding technology: FDM\u003cbr\u003e- Nozzle quantity: 1 \u003cbr\u003e- Nozzle diameter: 0.4mm. (Can be replaced by 0.3mm or 0.2mm)\u003cbr\u003e- Nozzle temperature: 260℃ max. \u003cbr\u003e- Platform Temperature: 100℃ max. \u003cbr\u003e- Printing size: 235 * 235 * 320 mm\u003cbr\u003e- Print speed: 180mm\/s (Max.) Normal printing speed 30-60mm\/s \u003cbr\u003e- Printing accuracy: ±0.1mm\u003cbr\u003e- Layer thickness: 0.1-0.4mm \u003cbr\u003e- Working modes: Online or TF offline modes \u003cbr\u003e- Supported files: For STL, Obj, amf\u003cbr\u003e- Host computer software: For Cura, Repetier-Host, Simplify3D \u003cbr\u003e- Power supply parameters: 100-120V-6.8A \/ 200-240V-3.4A, 50Hz\/60Hz\u003cbr\u003e- Machine power: 290W \u003cbr\u003e- Printed material: PLA, ABS, Soft glue, wood, with copper, gradient, etc.\u003cbr\u003e- Material diameter: 1.75mm \u003cbr\u003e- Screen: 3.5-inch touch screen \u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of 3D Printer \u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824952225841,"sku":"64734","price":537.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076943298609_watermarked_0.jpg_0.png?v=1767999810"},{"product_id":"bigtreetech-skr-v1-4-turbo-motherboard-3d-printer-controller-board-32-bit-integrated-motherboard-with-arm-cortex-m3-cpu-1","title":"BIGTREETECH SKR V1.4 Turbo Motherboard 3D Printer Controller Board 32 Bit Integrated Motherboard with ARM Cortex-M3 CPU","description":"\u003cp\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003e- Size: 110 x 85mm\u003cbr\u003e- Mounting size: 102 x 76mm\u003cbr\u003e- Micro-processor: ARM Cortex-M3 CPU\u003cbr\u003e- Input voltage: DC12V-DC24V 5A-15A\u003cbr\u003e- Logic voltage: DC3.3V\u003cbr\u003e- WiFi module: ESP-01S\u003cbr\u003e- Drive working mode support: SPI\/USRT\/STEP\/DIR\u003cbr\u003e- Motor driver port: X\/Y\/Z\/E0\/E1 5 channel (each loop has a maximum of 256 subdivisions\u003cbr\u003e- Supported file format: G-code\u003cbr\u003e- Supported machine structure: XYZ\/delta\/kossel\/Ultimaker\/corexy\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Board\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/1.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/2.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/3.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/4.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/5.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/6.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/7.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/8.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/9.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/13.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/15.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/16.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/17.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/18.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40826078625841,"sku":"80057","price":46.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077283168305_watermarked_0.jpg_0.png?v=1767938108"},{"product_id":"3d-printer-extruder-apply-to-voron2-4-3d-printer-accessory-with-high-temperature-resistant-shell-for-ldo-orbiter-2-3","title":"3D Printer Extruder Apply to Voron2.4 3D Printer Accessory with High Temperature Resistant Shell for LDO Orbiter 2.0","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- For Bondetech shorter hardened drive gear, 11mm and 15mm\u003cbr\u003e- Weight reduced to about 135g\u003cbr\u003e- Smaller and more compact size (11.6% shorter)\u003cbr\u003e- The new appearance design can improve the extrusion force by about 40% under actual printing conditions, and greatly improve the acceleration performance\u003cbr\u003e- Dual drive gear - consumable path closer to the center of the extruder for a more balanced design for Delta printers\u003cbr\u003e- Stainless steel consumable outlet guide with 0.2-0.3mm clearance for driving gear for the best TPU printing experience and extreme wear resistance when using abrasive consumables.\u003cbr\u003e- High temperature resistant shell (hardness: GPA12)\u003cbr\u003e- Design of tensioning structure with bite screws\u003cbr\u003e- The fixing screw is in line with the path of the consumable outlet - improving the rigidity of the housing and making it easier to install\u003cbr\u003e- Aligned consumable path\u003cbr\u003e- New smaller and more fashionable air pipe connector\u003cbr\u003e- The motor position is rotated by an additional 10 degrees for easy maintenance and assembly\u003cbr\u003e- Very low back clearance is about 0.06mm\u003cbr\u003e- Consumable sensor adds auto load and unload button function\u003cbr\u003e- There are more minor changes to improve mechanical accuracy and design appearance\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x 3D Printer Extruder\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80060\/80060-1.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80060\/80060-2.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80060\/80060-3.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80060\/80060-4.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80060\/80060-5.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80060\/80060-6.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80060\/80060-7.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826079608881,"sku":"80060","price":58.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077284184113_watermarked_0.jpg_0.png?v=1767937892"},{"product_id":"bigtreetech-skr-v1-4-motherboard-3d-printer-controller-board-32-bit-integrated-motherboard-with-arm-cortex-m3-cpu-2","title":"BIGTREETECH SKR V1.4 Motherboard 3D Printer Controller Board 32 Bit Integrated Motherboard with ARM Cortex-M3 CPU","description":"\u003cp\u003e\u003cb\u003eSpecification:\u003c\/b\u003e\u003cbr\u003e- Size: 110 x 85mm\u003cbr\u003e- Mounting size: 102 x 76mm\u003cbr\u003e- Micro-processor: ARM Cortex-M3 CPU\u003cbr\u003e- Input voltage: DC12V-DC24V 5A-15A\u003cbr\u003e- Logic voltage: DC3.3V\u003cbr\u003e- WiFi module: ESP-01S\u003cbr\u003e- Drive working mode support: SPI\/USRT\/STEP\/DIR\u003cbr\u003e- Motor driver port: X\/Y\/Z\/E0\/E1 5 channel (each loop has a maximum of 256 subdivisions\u003cbr\u003e- Supported file format: G-code\u003cbr\u003e- Supported machine structure: XYZ\/delta\/kossel\/Ultimaker\/corexy\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Board\u003cbr\u003e- 1 x USB Cable\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/1.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/2.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/3.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/4.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/5.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/6.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/7.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/8.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/9.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/13.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/15.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/16.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/17.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/80056\/18.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40826079805489,"sku":"80056","price":28.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/80056-1_0d8d3ed5-ed2f-4486-a4d8-2e3844e08e73.jpg?v=1776327996"},{"product_id":"oukea-motor-stepper-motor-ok35sth52-1504a-nema14-phase-current-1-5a-0-4nm-stepping-motor-35byg52","title":"OUKEA Motor Stepper Motor OK35STH52-1504A NEMA14 Phase Current 1.5A 0.4Nm Stepping Motor 35BYG52","description":"\u003cp\u003e\u003cimg style=\"width: 944px;\" src=\"https:\/\/www.byimg.com\/catalog\/74968\/74970-01.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Stepper Motor\u003c\/p\u003e","brand":"OUKEA","offers":[{"title":"Default Title","offer_id":40827502460977,"sku":"74970","price":28.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078210371633_watermarked_0.jpg_0.png?v=1767828226"},{"product_id":"oukeda-stepping-motor-ok42sth47-204a1xh-3d-printer-stepper-motor-2a-0-59nm-step-motor-for-voron2-4","title":"OUKEDA Stepping Motor OK42STH47-204A1XH 3D Printer Stepper Motor 2A 0.59Nm Step Motor For Voron2.4","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/74971\/74971-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/74971\/74971-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/74971\/74971-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/74971\/74971-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 709px;\" src=\"https:\/\/www.byimg.com\/catalog\/74971\/74971-05.jpg\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Stepper Motor\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAttention:\u003c\/b\u003e\u003cbr\u003e- Product Size: 42 x 48mm\/1.7 x 1.9\"\u003c\/p\u003e","brand":"OUKEDA","offers":[{"title":"Default Title","offer_id":40827502526513,"sku":"74971","price":19.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078210437169_watermarked_0.jpg_0.png?v=1767828214"},{"product_id":"oukeda-motor-17hs2408-3d-printer-stepper-motor-two-phase-hybrid-stepper-motor-nema-17-stepping-motor","title":"OUKEDA MOTOR 17HS2408 3D Printer Stepper Motor Two-Phase Hybrid Stepper Motor NEMA 17 Stepping Motor","description":"\u003cp\u003e\u003cimg style=\"width: 1291px;\" src=\"https:\/\/www.byimg.com\/catalog\/74971\/74972-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Stepper Motor\u003cbr\u003e\u003c\/p\u003e","brand":"OUKEDA","offers":[{"title":"Default Title","offer_id":40827502559281,"sku":"74972","price":15.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078210469937_watermarked_0.jpg_0.png?v=1767828202"},{"product_id":"oukeda-57h1876-420-8-21b-stepper-motor-1-8-4-2a-1-8nm-57-stepping-motor-nema23-stepper-motor","title":"OUKEDA 57H1876-420-8-21B Stepper Motor 1.8° 4.2A 1.8Nm 57 Stepping Motor Nema23 Stepper Motor","description":"\u003cp\u003e\u003cimg style=\"width: 1061px;\" src=\"https:\/\/www.byimg.com\/catalog\/74971\/74973-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Stepper Motor\u003cbr\u003e\u003c\/p\u003e","brand":"OUKEDA","offers":[{"title":"Default Title","offer_id":40827502592049,"sku":"74973","price":40.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078210502705_watermarked_0.jpg_0.png?v=1767828191"},{"product_id":"oukeda-ok42sth20-104a-xh400-3d-printer-motor-nema-17-stepper-motor-42-stepping-motor-for-voron-2-4","title":"OUKEDA OK42STH20-104A-XH400 3D Printer Motor Nema 17 Stepper Motor 42 Stepping Motor For VORON 2.4","description":"\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74974\/74974-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74974\/74974-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74974\/74974-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74974\/74974-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 840px;\" src=\"https:\/\/www.byimg.com\/catalog\/74974\/74974-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Stepper Motor\u003c\/p\u003e","brand":"OUKEDA","offers":[{"title":"Default Title","offer_id":40827502624817,"sku":"74974","price":16.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078210535473_watermarked_0.jpg_0.png?v=1767828180"},{"product_id":"oukeda-ok42sth34-044e-200g-lead-screw-stepper-motor-200mm-7-9-quot-0-4a-42-step-motor-for-voron-v0-1-bom","title":"OUKEDA OK42STH34-044E-200G Lead Screw Stepper Motor 200MM\/7.9\" 0.4A 42 Step Motor For VORON V0.1 BOM","description":"\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74976\/74976-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74976\/74976-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74976\/74976-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 930px;\" src=\"https:\/\/www.byimg.com\/catalog\/74976\/74976-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Stepper Motor\u003c\/p\u003e","brand":"OUKEDA","offers":[{"title":"Default Title","offer_id":40827502690353,"sku":"74976","price":29.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078210601009_watermarked_0.jpg_0.png?v=1767828161"},{"product_id":"5pcs-oukeda-17hs4401-42-stepper-motor-nema-17-hybrid-stepping-motor-printer-motor-for-3d-printer","title":"5PCS OUKEDA 17HS4401 42 Stepper Motor Nema 17 Hybrid Stepping Motor Printer Motor For 3D Printer","description":"\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/74978\/74978-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1037px;\" src=\"https:\/\/www.byimg.com\/catalog\/74978\/74978-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 5 x Stepper Motors With Cables\u003cbr\u003e\u003c\/p\u003e","brand":"OUKEDA","offers":[{"title":"Default Title","offer_id":40827502755889,"sku":"74978","price":64.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078210666545_watermarked_0.jpg_0.png?v=1767828142"},{"product_id":"biqu-h2-v2s-lite-revo-dual-gear-3d-printer-extruder-kit-with-high-flow-rate-amp-quick-release-nozzle","title":"BIQU H2 V2S Lite Revo Dual Gear 3D Printer Extruder Kit with High Flow Rate \u0026 Quick Release Nozzle","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-13.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-14.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85681-15.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIQU","offers":[{"title":"Default Title","offer_id":40828976594993,"sku":"85681","price":245.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757335089_watermarked_0.jpg_0.png?v=1767624846"},{"product_id":"bigtreetech-tmc2209-v1-2-uart-stepper-motor-driver-accessory-for-3d-printer-two-phase-stepper-motors","title":"BIGTREETECH TMC2209 V1.2 UART Stepper Motor Driver Accessory for 3D Printer Two-Phase Stepper Motors","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eTMC2209 is an ultra-silent motor driver IC for two-phase stepper motors. Its continuous drive current is 2A and peak current is 2.8A. Compared with TMC2208, the driving current of this IC is not only improved by 0.6A-0.8A, but also this IC increases the function of locked-motor test.\u003cbr\u003e\u003cbr\u003eFlexible microPlyer interpolation unit can provide 256 micro-steps. Stallguard4™locked-motor test can provide an abnormal signal when the motor rotates abnormally. CoolStep™ current dynamic control can save 75% energy. The sinusoidal control can be perfectly realized even in the system with limited pulse frequency. Since stealthChop2 ™ ultra-quiet technology is widely used in 3D printing, the design of these components is also compatible with existing 3D printer electronic devices, and it eliminates the expensive cost of redesigning.The module has a standard step\/dir interface, it's easy to use.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- The motor is difficult to lose steps\u003cbr\u003e- Ultra-quiet mode\u003cbr\u003e- The module has a large-area cooling pad and it can lower the temperature when drive is working\u003cbr\u003e- The module can prevent the motor from shaking\u003cbr\u003e- The module supports locked-motor test\u003cbr\u003e- The module supports STEP\/DIR and UART mode\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Product size: 15.24mm*20.32mm\u003cbr\u003e- Power voltage (VM): 4.75V-28V DC\u003cbr\u003e- Peak current: 2.8A\u003cbr\u003e- Current RMS: 2A\u003cbr\u003e- Microstep setting: 2, 4, 8 and 16 (can be divided into 256 parts)\u003cbr\u003e- Max microstep: 256\u003cbr\u003e- Operating mode: STEP\/DIR or UART\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x TMC2209 V1.2 Stepper Motor Driver\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 800.167px; height: 536.912px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85682-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800.15px; height: 532.9px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85682-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 776px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85682-03.JPG\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 772px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85682-04.JPG\"\u003e\u003cbr\u003e1. Vref range: 0.2V-2.2V\u003cbr\u003e2. Default Vref: 1.2V±0.1V\u003cbr\u003e3. Default current: 0.9A\u003cbr\u003e4. Potentiometer regulation: Rotate the potentiometer clockwise to reduce the Vref voltage and the drive current can be reduced. Rotate the potentiometer counterclockwise to increase the Vref voltage and the drive current can be increased.\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 766px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85682-05.JPG\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 632px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85682-06.JPG\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 770px;\" src=\"https:\/\/www.byimg.com\/catalog\/85583\/85682-07%202.JPG\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003ePrecautions:\u003c\/b\u003e\u003cbr\u003e1. Be sure to disconnect the power supply before installing the driver to prevent the drive from burning.\u003cbr\u003e2. Before installing the driver, be sure to confirm the direction of the drive to prevent the drive from burning due to reverse connection.\u003cbr\u003e3. Pay attention to the line sequence and IO port when wiring. Connecting the wrong line will directly cause the drive to not work. Carefully connected, corresponding to the above illustration.\u003cbr\u003e4. Do not plug and unplug the drive module with power to avoid damage.\u003cbr\u003e5. When installing the heat sink, there can be no contact between the heat sink and the pin header pin to prevent short circuit of the drive.\u003cbr\u003e6. The product is sensitive to static electricity, please handle it carefully when using. It is best to remove the packaging when using.\u003cbr\u003e7. Before use, be sure to do heat dissipation treatment of the driver (heat sink, cooling fan, etc.).\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828976922673,"sku":"85682","price":11.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757400625_watermarked_0.jpg_0.png?v=1767624831"},{"product_id":"bigtreetech-octopus407-3d-printer-motherboard-3d-printer-control-system-for-voron-klipper-marlin","title":"BIGTREETECH Octopus(407) 3D Printer Motherboard 3D Printer Control System for Voron Klipper\/Marlin","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-08.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-09.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-10.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85683-11.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Motherboard\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828976988209,"sku":"85683","price":54.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757466161_watermarked_0.jpg_0.png?v=1767624806"},{"product_id":"bigtreetech-octopus446-3d-printer-motherboard-3d-printer-control-system-for-voron-klipper-marlin","title":"BIGTREETECH Octopus(446) 3D Printer Motherboard 3D Printer Control System for Voron Klipper\/Marlin","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-08.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-09.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-10.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-11.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-12.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Motherboard\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828977020977,"sku":"85684","price":56.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757498929_watermarked_0.jpg_0.png?v=1767624798"},{"product_id":"bigtreetech-octopus446-3d-printer-motherboard-mini12864-lcd-display-for-voron-klipper-marlin","title":"BIGTREETECH Octopus(446) 3D Printer Motherboard + Mini12864 LCD Display for Voron Klipper\/Marlin","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-08.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-09.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-10.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-11.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-12.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Motherboard\u003cbr\u003e- 1 x Mini12864 LCD\u003cbr\u003e- 2 x Cables\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828977053745,"sku":"85685","price":63.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757531697_watermarked_0.jpg_0.png?v=1767624791"},{"product_id":"bigtreetech-octopus446-3d-printer-motherboard-8pcs-tmc2209-drivers-for-voron-klipper-marlin","title":"BIGTREETECH Octopus(446) 3D Printer Motherboard + 8pcs TMC2209 Drivers for Voron Klipper\/Marlin","description":"\u003cp\u003e\u003cb\u003e\u003c\/b\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-08.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-09.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-10.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-11.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-12.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Motherboard\u003cbr\u003e- 8 x TMC2209\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828977152049,"sku":"85686","price":87.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757564465_watermarked_0.jpg_0.png?v=1767624783"},{"product_id":"bigtreetech-octopus446-3d-printer-motherboard-mini12864-lcd-8pcs-tmc2209-drivers-for-voron","title":"BIGTREETECH Octopus(446) 3D Printer Motherboard + Mini12864 LCD + 8pcs TMC2209 Drivers for Voron","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-08.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-09.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-10.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-11.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85684-12.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Motherboard\u003cbr\u003e- 1 x Mini12864 LCD\u003cbr\u003e- 2 x Cables\u003cbr\u003e- 8 x TMC2209\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828977184817,"sku":"85687","price":97.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757597233_watermarked_0.jpg_0.png?v=1767624775"},{"product_id":"bigtreetech-sfs-v2-0-smart-filament-sensor-filament-runout-sensor-module-accessory-for-3d-printers","title":"BIGTREETECH SFS V2.0 Smart Filament Sensor Filament Runout Sensor Module Accessory for 3D Printers","description":"\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-02.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-03.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-04.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-05.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-06.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-07.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-08.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-09.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-10.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-11.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-12.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-13.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85688-14.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828977217585,"sku":"85688","price":21.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757630001_watermarked_0.jpg_0.png?v=1767624765"},{"product_id":"bigtreetech-skr-3-h723-32bit-550mhz-3d-printer-control-board-accessory-suitable-for-3d-printers","title":"BIGTREETECH SKR 3 (H723) 32Bit 550MHz 3D Printer Control Board Accessory Suitable for 3D Printers","description":"\u003cp\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:  \u003cbr\u003e1. EZ-Driver Connector is required if you use EZ driver (like EZ2209 \/ EZ5160 Pro) for SKR 3 control board.\u003cbr\u003e2. The chip has been updated to H723, which has a faster refresh rate (up to 550MHZ).\u003cbr\u003e3. DC MODE board is not included.\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-13.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-14.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-15.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-16.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-17.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-18.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-19.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828977250353,"sku":"85689","price":73.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757662769_watermarked_0.jpg_0.png?v=1767624756"},{"product_id":"bigtreetech-skr-3h723-32bit-550mhz-3d-printer-control-board-dc-mode-module-for-3d-printers","title":"BIGTREETECH SKR 3(H723) 32Bit 550MHz 3D Printer Control Board + DC MODE Module for 3D Printers","description":"\u003cp\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of control board with DC MODE module\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNote:  \u003cbr\u003e1. EZ-Driver Connector is required if you use EZ driver (like EZ2209 \/ EZ5160 Pro) for SKR 3 control board.\u003cbr\u003e2. The chip has been updated to H723, which has a faster refresh rate (up to 550MHZ).\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-13.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-14.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-15.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-16.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-17.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 800px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85689-18.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828977283121,"sku":"85690","price":76.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078757695537_watermarked_0.jpg_0.png?v=1767624748"},{"product_id":"bigtreetech-hdmi5-5-inch-800x480-3d-printer-touch-screen-ips-3d-printer-display-diy-accessory","title":"BIGTREETECH HDMI5 5-Inch 800x480 3D Printer Touch Screen IPS 3D Printer Display DIY Accessory","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe HDMI 5 \u0026amp; HDMI 7 are developed for users of 3d printers using the Klipper system. It can work with Raspberry Pi4, PI4B+CB1, BTT PI, Manta M8P+CB1, Manta M4P+CB1, Manta E3EZ+ CB1, and other mini PC. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Optional HD IPS screen. The resolution of the 7-inch screen is 1024*600, while the 5-inch screen is 800*480. Adopt IPS capacitive touch screen, support 5-point touch.\u003cbr\u003e- Plug and Play. Simply connect the screen to the device via the HDMI port and power the Type C port to make it functional without installing any drivers. This screen is great for 3d printer users to DIY their projects, and it can perfectly be compatible with the Manta series motherboard plus CB1. Let it add a more seamless visual experience to your printer system.\u003cbr\u003e- Adjustable brightness and display direction. You can increase the brightness via the Ks1 button, Ks3 for decreasing, and Ks2 for 180° display direction adjustment (Refer to the following product detail image).\u003cbr\u003e- Support audio output. Built-in audio decoding circuit, supports 3.5mm headphone jack audio output. 3.5mm audio interface transmits the audio signal without noise and current, giving you pure and delicate sound.\u003cbr\u003e- 4pin XH2.54 breakout port. The 4-pins XH2.54 breakout port allows custom connection via USB protocol, as well as screen independent power (DC 5V), giving users more DIY options.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Touch Screen\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote:\u003cbr\u003e- Battery is not included.\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-13.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-14.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-15.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828979380273,"sku":"85691","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078758383665_watermarked_0.jpg_0.png?v=1767624733"},{"product_id":"bigtreetech-hdmi7-7-inch-1024x600-3d-printer-touch-screen-ips-3d-printer-display-diy-accessory","title":"BIGTREETECH HDMI7 7-Inch 1024x600 3D Printer Touch Screen IPS 3D Printer Display DIY Accessory","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe HDMI 5 \u0026amp; HDMI 7 are developed for users of 3d printers using the Klipper system. It can work with Raspberry Pi4, PI4B+CB1, BTT PI, Manta M8P+CB1, Manta M4P+CB1, Manta E3EZ+ CB1, and other mini PC. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Optional HD IPS screen. The resolution of the 7-inch screen is 1024*600, while the 5-inch screen is 800*480. Adopt IPS capacitive touch screen, support 5-point touch.\u003cbr\u003e- Plug and Play. Simply connect the screen to the device via the HDMI port and power the Type C port to make it functional without installing any drivers. This screen is great for 3d printer users to DIY their projects, and it can perfectly be compatible with the Manta series motherboard plus CB1. Let it add a more seamless visual experience to your printer system.\u003cbr\u003e- Adjustable brightness and display direction. You can increase the brightness via the Ks1 button, Ks3 for decreasing, and Ks2 for 180° display direction adjustment (Refer to the following product detail image).\u003cbr\u003e- Support audio output. Built-in audio decoding circuit, supports 3.5mm headphone jack audio output. 3.5mm audio interface transmits the audio signal without noise and current, giving you pure and delicate sound.\u003cbr\u003e- 4pin XH2.54 breakout port. The 4-pins XH2.54 breakout port allows custom connection via USB protocol, as well as screen independent power (DC 5V), giving users more DIY options.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Touch Screen\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote:\u003cbr\u003e- Battery is not included.\u003cbr\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-13.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-14.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85691-15.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828979413041,"sku":"85692","price":47.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078758416433_watermarked_0.jpg_0.png?v=1767624719"},{"product_id":"bigtreetech-skr-pico-3d-printer-control-board-3d-printer-motherboard-for-raspberry-pi-voron-v0","title":"BIGTREETECH SKR PICO 3D Printer Control Board 3D Printer Motherboard for Raspberry Pi Voron V0","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Brand-new Version for Voron V0 \u0026amp; \u0026amp; V0.1. Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040, Bigtreetech SKR Pico V1.0 has been upgraded on ID design, which coexists of stylish appearance and excellent performances. It is an ideal choice for Voron players. The fuse kit consists of fuse and holder, which enables easy disassembling and installation. Type-C interface allows for main control communication.\u003cbr\u003e- Perfectly match With Raspberry Pi or BTT Pi. With the Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal space. The unique lateral design of SKR Pico's seat perfectly matches the space characteristics of the Voron V0 and V0.1 machines that need to be fixed to the motherboard longitudinally.\u003cbr\u003e- Mute Printing \u0026amp; Premium Capacitors. Featured with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts original quality capacitors (for Murata) to enhance the product's quality.\u003cbr\u003e- Upgraded Heat Dissipation. Upgrade the design of the heat sink and increase the heat dissipation area. Fans can be added to lower the temperature of the whole machine when the it's working, effectively solving problems related to heat dissipation, and improving heat dissipation performance.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFor more detailed information:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/bigtreetech\/SKR-Pico\"\u003ehttps:\/\/github.com\/bigtreetech\/SKR-Pico\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x SKR PICO board\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828979478577,"sku":"85693","price":32.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078758481969_watermarked_0.jpg_0.png?v=1767624698"},{"product_id":"bigtreetech-skr-pico-3d-printer-control-board-3d-printer-motherboard-btt-pi-board-for-voron-v0","title":"BIGTREETECH SKR PICO 3D Printer Control Board 3D Printer Motherboard + BTT PI Board for Voron V0","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Brand-new Version for Voron V0 \u0026amp; \u0026amp; V0.1. Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040, Bigtreetech SKR Pico V1.0 has been upgraded on ID design, which coexists of stylish appearance and excellent performances. It is an ideal choice for Voron players. The fuse kit consists of fuse and holder, which enables easy disassembling and installation. Type-C interface allows for main control communication.\u003cbr\u003e- Perfectly match With Raspberry Pi or BTT Pi. With the Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal space. The unique lateral design of SKR Pico's seat perfectly matches the space characteristics of the Voron V0 and V0.1 machines that need to be fixed to the motherboard longitudinally.\u003cbr\u003e- Mute Printing \u0026amp; Premium Capacitors. Featured with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts original quality capacitors (for Murata) to enhance the product's quality.\u003cbr\u003e- Upgraded Heat Dissipation. Upgrade the design of the heat sink and increase the heat dissipation area. Fans can be added to lower the temperature of the whole machine when the it's working, effectively solving problems related to heat dissipation, and improving heat dissipation performance.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFor more detailed information:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/bigtreetech\/SKR-Pico\"\u003ehttps:\/\/github.com\/bigtreetech\/SKR-Pico\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x SKR PICO board\u003cbr\u003e- 1 x BTT PI board\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828979544113,"sku":"85694","price":62.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078758547505_watermarked_0.jpg_0.png?v=1767624680"},{"product_id":"bigtreetech-skr-pico-3d-printer-control-board-3d-printer-motherboard-display-screen-for-voron-v0","title":"BIGTREETECH SKR PICO 3D Printer Control Board 3D Printer Motherboard + Display Screen for Voron V0","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- Brand-new Version for Voron V0 \u0026amp; \u0026amp; V0.1. Featured with Raspberry Pi ARM Cortex- Mo+ MCU PR2040, Bigtreetech SKR Pico V1.0 has been upgraded on ID design, which coexists of stylish appearance and excellent performances. It is an ideal choice for Voron players. The fuse kit consists of fuse and holder, which enables easy disassembling and installation. Type-C interface allows for main control communication.\u003cbr\u003e- Perfectly match With Raspberry Pi or BTT Pi. With the Raspberry Pi board frame, Raspberry Pi can be perfectly installed on BTT SKR Pico V1.0, saving internal space. The unique lateral design of SKR Pico's seat perfectly matches the space characteristics of the Voron V0 and V0.1 machines that need to be fixed to the motherboard longitudinally.\u003cbr\u003e- Mute Printing \u0026amp; Premium Capacitors. Featured with TMC2209 mute driver UART mode, SKR PICO V1.0 supports mute 3D printing. The main version of the chip capacitor (MLCC) adopts original quality capacitors (for Murata) to enhance the product's quality.\u003cbr\u003e- Upgraded Heat Dissipation. Upgrade the design of the heat sink and increase the heat dissipation area. Fans can be added to lower the temperature of the whole machine when the it's working, effectively solving problems related to heat dissipation, and improving heat dissipation performance.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFor more detailed information:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/bigtreetech\/SKR-Pico\"\u003ehttps:\/\/github.com\/bigtreetech\/SKR-Pico\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x SKR PICO board\u003cbr\u003e- 1 x Display screen\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85693-13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828979576881,"sku":"85695","price":52.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078758580273_watermarked_0.jpg_0.png?v=1767624672"},{"product_id":"bigtreetech-manta-m8p-v1-1-3d-printer-motherboard-3d-printer-accessory-for-klipper-voron-3d-printer","title":"BIGTREETECH Manta M8P V1.1 3D Printer Motherboard 3D Printer Accessory for Klipper Voron 3D Printer","description":"\u003cp\u003e\u003cb\u003eM8P V1.1 Features:\u003c\/b\u003e\u003cbr\u003e1. Adopt 32-bit 64MHz ARM Cortex-M0+ series STM32G0B1VET6 as the main control chip;\u003cbr\u003e2. The power chip, TPS5450-5A, supports DC12\/24V power input. The output current of the chip is up to 5A, and the peak value can reach 6A, which perfectly supports the power supply of Raspberry Pi;\u003cbr\u003e3. There is a BOOT button reserved on the motherboard, and users can update the bootloader through DFU;\u003cbr\u003e4. The thermistor part includes a protection circuit that protects the main control chip from the possibility of burning caused by leakage of the heated bed or heater cartridge;\u003cbr\u003e5. 24V, 12V, and 5V voltages are available for CNC fans, eliminating the need for an external transformer module, thereby reducing the chance of damage to the motherboard due to improper operation;\u003cbr\u003e6. The thermistor can select the pull-up resistor value through the jumper, in this way, it supports PT1000 without an external module, which is convenient for customers to DIY;\u003cbr\u003e7. The MCU firmware can be updated via an SD card, or through Klipper's make flash command using DFU;\u003cbr\u003e8. The motherboard and the core board use the BTB connection to allow using other solutions other than CM4;\u003cbr\u003e9. On-board TMC-driver SPI and UART working modes and on-board DIAG function pins can be used by simply plugging and unplugging the jumper cap;\u003cbr\u003e10. Support filament runout detection, automatic shutdown, BLTouch, RGB lights...\u003cbr\u003e11. High efficiency MOSFET for less heat generation;\u003cbr\u003e12. Adopt replaceable fuse for easy replacement;\u003cbr\u003e13. Three-way four-wire fan interface is reserved, and it can be used to connect a water cooling device;\u003cbr\u003e14. The proximity switch interface is reserved. It supports NPN and PNP types. 24V, 12V and 5V voltage selection is available, common voltage selection with VFAN6;\u003cbr\u003e15. Provide the SPI expansion interface to allow Klipper firmware users to connect an external acceleration sensor for acceleration compensation.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003eBIGTREETECH Manta M8P V1.1 x 1\u003cbr\u003eDIY Crimp Terminal Set x 1\u003cbr\u003eJumper Cap 2.54mm Pitch x 50\u003cbr\u003eJumper Cap 2.0mm Pitch x 15\u003cbr\u003eUSB Type-C Cable x 1\u003cbr\u003eBTT Duck Toy x 1\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750.015px; height: 858.767px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-12.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85696-13.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828979642417,"sku":"85696","price":69.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078758645809_watermarked_0.jpg_0.png?v=1767624654"},{"product_id":"bigtreetech-manta-m8p-v2-0-3d-printer-motherboard-3d-printer-accessory-for-klipper-voron-3d-printer","title":"BIGTREETECH Manta M8P V2.0 3D Printer Motherboard 3D Printer Accessory for Klipper Voron 3D Printer","description":"\u003cp\u003e\u003cb\u003eManta M8P V2.0 Features:\u003c\/b\u003e\u003cbr\u003e- Installed with 32-bit 550MHz ARM Cortex-M0+ STM32H723ZET6 chip, its frequency is more faster.\u003cbr\u003e- Designed with the same connector as that of Raspberry Pi, giving you a confident connection with all versions of CM4, definitely, CB1. Also, a screw-reinforced installation is also available.\u003cbr\u003e- With rich expansion ports, it can support various expansion modules, such as BLTouch, LCD screen, RGB light, automatic shutdown parts, etc.\u003cbr\u003e- TPS5450-5A power supply chip: The 5A output perfectly matches the power supply need of Raspberry Pi.\u003cbr\u003e- Selectable CNC fan voltage: 5V\/12V\/24V.\u003cbr\u003e- Reserved CAN Bus port can be connected with EBB CAN, which will simplify the wiring and provide strong anti-interference ability.\u003cbr\u003e- Update: All new ID. Added I2C, 5V Servo, Expanded IO, and TFT interface. Using 12V power solution. Optimized 5V power supply circuit.\u003cbr\u003e- The M8P V2.0 \u0026amp; CB1 can be the best choice for Voron 2.4, VzBot, etc.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of Manta M8P V2.0\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 750px;\" src=\"https:\/\/www.byimg.com\/catalog\/85684\/85697-10.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40828979675185,"sku":"85697","price":75.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7078758678577_watermarked_0.jpg_0.png?v=1767624646"},{"product_id":"bigtreetech-panda-touch-5-quot-touch-screen-wifi-display-for-bambu-lab-x1-p1-a1-multi-printer-control","title":"BIGTREETECH Panda Touch 5\" Touch Screen Wifi Display for Bambu Lab X1 P1 A1 Multi-printer Control","description":"\u003cp\u003e\u003cb\u003eImportant Note:\u003c\/b\u003e\u003cbr\u003eThe Panda Touch is currently compatible with all Bambu Lab printer firmware versions up until:\u003cbr\u003e- P1P --\u0026gt; v01.06.00.09\u003cbr\u003e- P1S --\u0026gt; v01.06.00.09\u003cbr\u003e- X1C --\u0026gt; v01.08.00.00\u003cbr\u003e- A1 --\u0026gt; v01.03.00.00\u003cbr\u003e- A1 Mini --\u0026gt; v01.03.00.00\u003cbr\u003e\u003cbr\u003eIt is possible that Bambu Lab may release a future firmware version which impacts the functions available from the Panda Touch. We will monitor all beta firmware versions. And if we find a firmware version that affects Panda Touch functionality, we will send out an alert via email, chat and our social channels. Buyers can then decide whether or not they would like to perform the update at the risk of losing functionality. Note that the Panda Touch warranty does not cover lost functionality due to a Bambu Lab firmware update being performed.\u003cbr\u003e\u003cbr\u003eClick the link to view Panda Touch software instructions and more product information: \u003ca href=\"https:\/\/bttwiki.com\/PandaTouch.html\"\u003ehttps:\/\/bttwiki.com\/PandaTouch.html\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Description:\u003c\/b\u003e\u003cbr\u003eThe Panda Touch is a 5'' touch screen. It offers a beautiful UI with convenient features and can be used as an alternative or a replacement screen for the Bambu P1P and Bambu P1S. It also interfaces with the X1 and A1 series and supports group printing and control for up to 10 Bambu Labs printers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cbr\u003e* Plug-and-play convenience. Enjoy hassle-free setup with a quick installation that does not void your warranty.\u003cbr\u003e* Customized UX \u0026amp; UI. It delivers a tailored user experience that remains familiar but adds the extra features needed for multi machine control.\u003cbr\u003e* Versatile functionality. All of the functions you would expect from a rich graphical display, with some extras thrown in!\u003cbr\u003e* Seamless connectivity. Connect effortlessly via WiFi.\u003cbr\u003e* Magnetic charging. Effortless mobile portability with convenient magnetic charging technology.\u003cbr\u003e* Multi-printer control. Effortlessly manage multiple printers simultaneously for seamless synchronized control and printing.\u003cbr\u003e* AMS filament changing system control. Get easy access to the multi-color printing controls with one touch access to control over the filament-changing system.\u003cbr\u003e\u003cbr\u003eNote: The Panda Touch firmware has been updated to V1.0.4. Some units may ship with an earlier firmware version. Please check your firmware version and upgrade to the latest for the best user experience. Please click on the link \u003ca href=\"https:\/\/bttwiki.com\/PandaTouch.html#firmware\"\u003ehttps:\/\/bttwiki.com\/PandaTouch.html#firmware\u003c\/a\u003e for the upgrade tutorial.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e* 1 x Panda Touch\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackaging Details:\u003c\/b\u003e\u003cbr\u003e* Weight: 0.45kg\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-12.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40829855563825,"sku":"91558","price":78.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7079131283505_watermarked_0.jpg_0.png?v=1767566412"},{"product_id":"bigtreetech-panda-touch-5-quot-touch-screen-usb-dock-for-bambu-lab-x1-p1-a1-multi-printer-control","title":"BIGTREETECH Panda Touch 5\" Touch Screen + USB Dock for Bambu Lab X1 P1 A1 Multi-printer Control","description":"\u003cp\u003e\u003cb\u003eImportant Note:\u003c\/b\u003e\u003cbr\u003eThe Panda Touch is currently compatible with all Bambu Lab printer firmware versions up until:\u003cbr\u003e- P1P --\u0026gt; v01.06.00.09\u003cbr\u003e- P1S --\u0026gt; v01.06.00.09\u003cbr\u003e- X1C --\u0026gt; v01.08.00.00\u003cbr\u003e- A1 --\u0026gt; v01.03.00.00\u003cbr\u003e- A1 Mini --\u0026gt; v01.03.00.00\u003cbr\u003e\u003cbr\u003eIt is possible that Bambu Lab may release a future firmware version which impacts the functions available from the Panda Touch. We will monitor all beta firmware versions. And if we find a firmware version that affects Panda Touch functionality, we will send out an alert via email, chat and our social channels. Buyers can then decide whether or not they would like to perform the update at the risk of losing functionality. Note that the Panda Touch warranty does not cover lost functionality due to a Bambu Lab firmware update being performed.\u003cbr\u003e\u003cbr\u003eClick the link to view Panda Touch software instructions and more product information: \u003ca href=\"https:\/\/bttwiki.com\/PandaTouch.html\"\u003ehttps:\/\/bttwiki.com\/PandaTouch.html\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eProduct Description:\u003c\/b\u003e\u003cbr\u003eThe Panda Touch is a 5'' touch screen. It offers a beautiful UI with convenient features and can be used as an alternative or a replacement screen for the Bambu P1P and Bambu P1S. It also interfaces with the X1 and A1 series and supports group printing and control for up to 10 Bambu Labs printers.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eKey Features:\u003c\/b\u003e\u003cbr\u003e* Plug-and-play convenience. Enjoy hassle-free setup with a quick installation that does not void your warranty.\u003cbr\u003e* Customized UX \u0026amp; UI. It delivers a tailored user experience that remains familiar but adds the extra features needed for multi machine control.\u003cbr\u003e* Versatile functionality. All of the functions you would expect from a rich graphical display, with some extras thrown in!\u003cbr\u003e* Seamless connectivity. Connect effortlessly via WiFi.\u003cbr\u003e* Magnetic charging. Effortless mobile portability with convenient magnetic charging technology.\u003cbr\u003e* Multi-printer control. Effortlessly manage multiple printers simultaneously for seamless synchronized control and printing.\u003cbr\u003e* AMS filament changing system control. Get easy access to the multi-color printing controls with one touch access to control over the filament-changing system.\u003cbr\u003e\u003cbr\u003eNote: The Panda Touch firmware has been updated to V1.0.4. Some units may ship with an earlier firmware version. Please check your firmware version and upgrade to the latest for the best user experience. Please click on the link \u003ca href=\"https:\/\/bttwiki.com\/PandaTouch.html#firmware\"\u003ehttps:\/\/bttwiki.com\/PandaTouch.html#firmware\u003c\/a\u003e for the upgrade tutorial.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e* 1 x Panda Touch\u003cbr\u003e* 1 x USB Dock\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackaging Details:\u003c\/b\u003e\u003cbr\u003e* Weight: 0.7kg\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-06.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-07.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-08.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-09.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-10.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-11.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/91540\/91558-12.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BIGTREETECH","offers":[{"title":"Default Title","offer_id":40829855596593,"sku":"91559","price":92.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7079131316273_watermarked_0.jpg_0.png?v=1767566395"},{"product_id":"belter-belt-tension-gauge-belt-tension-meter-with-digital-display-designed-for-voron2-4-3d-printers","title":"Belter Belt Tension Gauge Belt Tension Meter with Digital Display Designed for Voron2.4 3D Printers","description":"\u003cp\u003e\u003cb\u003eIntroduction:\u003c\/b\u003e\u003cbr\u003eBelter is a high-precision belt tension meter designed to accurately measure belt tension. It features an intuitive digital readout for clear and precise readings, facilitating accurate adjustments with ease.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- High Precision: Ensures accurate belt tension measurement.\u003cbr\u003e- Digital Display: Provides intuitive and clear tension readings.\u003cbr\u003e- Precision Engineering: Lightweight aluminum alloy bracket for accurate results.\u003cbr\u003e- Single-Hand Operation: Convenient and efficient to measure.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Product Name: Belter\u003cbr\u003e- Material: Aluminum Alloy Oxide Sandblasting\u003cbr\u003e- Unit Switching: inch\/mm\u003cbr\u003e- Power Source: 1x CR2032 3V Button Battery (Included)\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Belt tension gauge\u003cbr\u003e- 1 x Logo sticker\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackaging Details:\u003c\/b\u003e\u003cbr\u003e- Weight: 0.35kg\u003cbr\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cbr\u003eNote:\u003cbr\u003e- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDownload files for the printed part and tension calculation tool:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"https:\/\/github.com\/bigtreetech\/Belter-belt-tension-Tool\/tree\/master\"\u003ehttps:\/\/github.com\/bigtreetech\/Belter-belt-tension-Tool\/tree\/master\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92978-01.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92978-02.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92978-03.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92978-04.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92978-05.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92978-06.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40830030250033,"sku":"92978","price":23.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7079214415921_watermarked_0.jpg_0.png?v=1767547172"},{"product_id":"tmc5160t-8-35v-stepper-motor-driver-stepping-motor-driver-3d-printer-accessories-supports-spi-mode","title":"TMC5160T 8-35V Stepper Motor Driver Stepping Motor Driver 3D Printer Accessories Supports SPI Mode","description":"\u003cp\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92979-01.jpg\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe stepping motor driver is a unrivaled power for your 3D printers, with a TMC5160-TA driver chip.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of stepper motor driver\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackaging Details:\u003c\/b\u003e\u003cbr\u003e- Weight: 0.15kg\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40830030282801,"sku":"92979","price":19.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7079214448689_watermarked_0.jpg_0.png?v=1767547161"},{"product_id":"tmc5160t-pro-8-56v-stepper-motor-driver-stepping-motor-driver-3d-printer-accessory-for-spi-sd-modes","title":"TMC5160T PRO 8-56V Stepper Motor Driver Stepping Motor Driver 3D Printer Accessory for SPI SD Modes","description":"\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/92712\/92980-01.jpg\" style=\"width: 1000px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/92712\/92980-02.jpg\" style=\"width: 1000px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe stepping motor driver is a unrivaled power for your 3D printers, with a TMC5160-TA driver chip.\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of stepper motor driver\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackaging Details:\u003c\/b\u003e\u003cbr\u003e- Weight: 0.15kg\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40830030315569,"sku":"92980","price":21.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7079214481457_watermarked_0.jpg_0.png?v=1767547150"},{"product_id":"sfs-v2-0-smart-filament-sensor-filament-runout-sensor-3d-printer-parts-supports-1-75mm-filaments","title":"SFS V2.0 Smart Filament Sensor Filament Runout Sensor 3D Printer Parts Supports 1.75mm Filaments","description":"\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e4 Detection Functions\u003cbr\u003e* SFS V2.0 enables real-time monitoring of the entire printing process. When it detects a clogged nozzle, a broken filament, a filament tangled or an extruder failure, it will immediately send a fault alarm through the screen and automatically pause printing to avoid resource loss.\u003cbr\u003e\u003cbr\u003eReal-time Status Indication \u003cbr\u003e* An indicator light makes it easy for users to know the status of the filament. \u003cbr\u003e* When your printer is working properly and the filament is being squeezed out, the blue indicator is flashing. This indicates that the printing is going smoothly.\u003cbr\u003e* Filament run-out\/breakage: Red light will stay on to alert the user to pay attention and dispose of the filament immediately.\u003cbr\u003e* Other anomalies: When the nozzle is clogged, the extruder is faulty or the filament is winding, the blue light will stop flashing and stay on or off.\u003cbr\u003e\u003cbr\u003eSupported Firmware\u003cbr\u003e* It is for RepRap RRF, Klipper and Marlin.\u003cbr\u003e\u003cbr\u003eBi-directional Feeding\u003cbr\u003e* There is no need to distinguish between the inlet and outlet of filaments, and it allows for quick and easy installation and flexible placement to maximize space utilization.\u003cbr\u003e\u003cbr\u003ePhotoelectric Sensing Technology Makes the Detection More Accurate\u003cbr\u003e* The theoretical detection length is 2.88mm.\u003cbr\u003e\u003cbr\u003eEasy to Use \u0026amp; Compatible\u003cbr\u003e* With a push button for infeed and outfeed. It is easy and convenient to use.\u003cbr\u003e\u003cbr\u003e3 Screw Holes\u003cbr\u003e* There are 3 screw holes on the back, which is convenient for users to install and fix with printed parts (Link to download files for the bracket model: https:\/\/github.com\/bigtreetech\/smart-filament-detection-module\/tree\/master).\u003cbr\u003e\u003cbr\u003eSmaller Size and Lighter weight\u003cbr\u003e* The module weighs only 36g. It improves installation and space utilization, and does not overburden the proximity extruder, thus maintaining the speed and accuracy of printing.\u003cbr\u003e\u003cbr\u003eWidely Compatible\u003cbr\u003e* Compatible with motherboards with available I\/O ports (limit switches, consumables detection, BLTouch, inductive sensors, etc.).\u003cbr\u003e* Compatible with short-range\/long-range extruders.\u003cbr\u003e\u003cbr\u003eUnique Shape and Excellent Performance\u003cbr\u003e* SFS V2.0 has been carefully designed with a unique shape that combines beauty and practicality to add joy to your 3D printing process.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e- Detectable filaments: All 1.75mm filaments\u003cbr\u003e- Rated voltage: 3.3V-5V\u003cbr\u003e- Operating humidity: 10% to 90%\u003cbr\u003e- Hole spacing for fixing: 12.4x24.7mm\u003cbr\u003e- Detection length: 2.88mm (theoretical detection length. It may need to be adjusted)\u003cbr\u003e- Operating temperature: -10 to 50°C\u003cbr\u003e- Dimensions: 53.1x30.3x27.3mm\u003cbr\u003e- Weight: 36g\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x SFS V2.0\u003cbr\u003e- 1 x User manual\u003cbr\u003e- 2 x PTFE tubes (I.D.2xO.D.4x30 mm)\u003cbr\u003e- 1 x 100cm connection cable\u003cbr\u003e- 2 x PC4-M6 connectors\u003cbr\u003e- 2 x Pairs of collets and clips\u003cbr\u003e- 3 x M3x6 socket head cap screws\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackaging Details:\u003c\/b\u003e\u003cbr\u003e- Weight: 0.16kg\u003cbr\u003e\u003cbr\u003e\u003cimg style=\"width: 1000px;\" src=\"https:\/\/www.byimg.com\/catalog\/92712\/92981-01.jpg\"\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40830030348337,"sku":"92981","price":21.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7079214514225_watermarked_0.jpg_0.png?v=1767547139"}],"url":"https:\/\/www.thanksbuyer.com\/es\/collections\/3d-printer-parts.oembed?page=3","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}