| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $34.85 | $34.14 | $33.07 | $31.65 | Contact US |
WIFI V2.0 Pixhawk 2.4.8 Flight Controller w/ I2C Expansion Board + PPM Encoder + RGB LED Indicator
$150.12
WIFI V3.0 Pixhawk 2.4.8 Flight Controller w/ I2C Expansion Board + PPM Encoder + RGB LED Indicator
$156.37
GEPRC GEP-F405-HD V2 Flight Controller Plug and Play STM32F405 Chip ICM42688-P Gyroscope for DJI Air Unit
$32.08
F4 Pro V4 Flight Control Board F4 + OSD + PDB ICM20608/MPU6000 IMU for FPV Racing Drone RC Racer
Description:
The Omni F4 Pro V4 Corner flight controller uses the ICM20608 over SPI for the best possible flight performance. With onboard damping box, the ICM20608 runs perfect under 32k Gyro loop. If you haven't already seen it, you should check out Josh's awesome video on different IMUs. Also onboard are a barometer and AT7456 OSD chip for the BetaFlight integrated OSD.
Omni F4 Pro Corner supports 3-6s LIPO direct input, build in Current Sensor and Power Filter too.
Features:
- STM32 F405 MCU, Runs Betaflight firmware (supported from v3.2)
- ICM20608 Over SPI Bus in damping box.
- 30.5x30.5mm Mounting holes
- Supports Lipo direct plug in (3-6S)
- Supports 5V 1A BEC output (Buck)
- STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)
- Build in Current sensor
- Build in Professional level PDB
- Build in LC filter for Camera power (max 800ma)
Optional Part:
- ICM20608 IMU
- MPU6000 IMU
Package Included:
- 1 x Flight Controller Board
Note: Please leave a message about which optional part you want before placing an order. Thank you! 
