{"product_id":"nf-8209-pro-nf-8209pro-cable-tracker-network-cable-tester-ncv-detector-with-led-lighting","title":"NF-8209 Pro (NF-8209Pro) Cable Tracker Network Cable Tester NCV Detector with LED Lighting","description":"\u003cp\u003e\u003cb\u003eNF-8209 Pro (NF-8209Pro) Cable Tracker Network Cable Tester NCV Detector with LED Lighting\u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003cbr\u003eMultifunction Network Cable Tracer\u003cbr\u003e* 60V voltage withstand, overload protection\u003cbr\u003e* Line tracing, pair mapping, and cable testing\u003cbr\u003e* Testable cable length: 5–350m\u003cbr\u003e* Large 1400mAh lithium battery\u003cbr\u003e* Strong anti-interference signal\u003cbr\u003e* PoE testing and port flashing\u003cbr\u003e* RJ45\/RJ11 plug crimp testing\u003cbr\u003e* NCV detector and LED flashlight\u003cbr\u003e\u003cbr\u003e60V Voltage Withstand \u0026amp; Overload Protection\u003cbr\u003e* Safe protection: Supports safe and fast cable mapping under voltages not exceeding 60V, preventing device damage\u003cbr\u003e\u003cbr\u003eHigh-Standard Connectors\u003cbr\u003e* Firmly grips RJ45 and RJ11 plugs\u003cbr\u003e* Suitable for RJ45 network cables and RJ11 telephone cables\u003cbr\u003e* Dual-core telephone cables can be adapted using alligator clips\u003cbr\u003e\u003cbr\u003eLine Tracing Function\u003cbr\u003e* Quickly identifies the target cable\u003cbr\u003e* Supports network cables, telephone cables, and metal wires\u003cbr\u003e* Efficiently locates the correct cable in long or messy cable bundles\u003cbr\u003e\u003cbr\u003eNew Upgraded Combined Line Tracing \u0026amp; Pair Mapping\u003cbr\u003e* In line tracing mode, you can perform pair mapping directly without adjusting the main unit, greatly improving testing efficiency.\u003cbr\u003e* Note: Supports direct pair mapping for 60V low-voltage switches in powered-on state. Do not use on high-voltage lines. Non-standard or high-voltage switches cannot be mapped to avoid damaging the device.\u003cbr\u003e\u003cbr\u003eCable Sequence Indicator Lights\u003cbr\u003e* Makes pair mapping easy and simple\u003cbr\u003e* For network cable pair testing, select the pair mapping function with the button, then plug the cable into the main and secondary unit ports\u003cbr\u003e\u003cbr\u003ePoE Testing for Quick Identification\u003cbr\u003e* Can test MCU and IEEE 802.3af\/at PoE protocols\u003cbr\u003e* Connect the PoE device to the main unit using a network cable to quickly verify if it is a standard PoE device\u003cbr\u003e* Displays number of powered pins, voltage, device standard, and other parameters at a glance\u003cbr\u003e\u003cbr\u003ePort Flashing\u003cbr\u003e* Connect the cable under test to the transmitter\u003cbr\u003e* The corresponding port indicator on the switch or router will flash in sync, allowing easy identification\u003cbr\u003e\u003cbr\u003eSingle-End RJ45 Crimp Quick Test\u003cbr\u003e* Automatically detects if the cable RJ45 crimp is correct\u003cbr\u003e* Unlike traditional testers, it can test cables even with only one end terminated\u003cbr\u003e\u003cbr\u003eSignal Enhancement for Longer Cable Testing Distance\u003cbr\u003e* Can test continuity on cables up to 350 meters\u003cbr\u003e* Line tracing supports unshielded network cables up to 100 meters\u003cbr\u003e\u003cbr\u003eNCV Inductive Alarm Detection\u003cbr\u003e* AC voltage detection range: 48–1000V\u003cbr\u003e* When the probe approaches an AC voltage source and detects a signal, the receiver emits a \"beep\" alarm\u003cbr\u003e\u003cbr\u003eBuilt-In Illumination for Dark Areas\u003cbr\u003e* Equipped with a flashlight function, making work in dark or complex environments easier and safer\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e1. Transmitter Test Functions:\u003cbr\u003e1.1. Pair Test:\u003cbr\u003e* Applicable Cables: CAT5, CAT6\u003cbr\u003e* Cable Test Functions: Normal, Open Circuit, Short Circuit, Crossed\u003cbr\u003e* Cable Shielding: Can distinguish between Shielded and Unshielded\u003cbr\u003e* Wiring: 1-to-1 Pair, Punch-down\/Pair Interface + RJ45 Receiver Interface\u003cbr\u003e* Test Length: 600 meters\u003cbr\u003e\u003cbr\u003e1.2. Punch-down Test:\u003cbr\u003e* Test Type: 8-core\u003cbr\u003e* Identification Response Time: ≤1 second\u003cbr\u003e* Minimum Identification Length: Greater than half the internal length of the RJ45 connector\u003cbr\u003e\u003cbr\u003e1.3. Length Test:\u003cbr\u003e* Cable Type Tested: CAT5, CAT6\u003cbr\u003e* Open Circuit Length Measurement Range: 5–300 meters\u003cbr\u003e* Typical Measurement Accuracy: ≤20m: ±1.6m; 20–100m: ±2.4m; ＞100m: ±3.2m\u003cbr\u003e* Minimum Resolution for Length Measurement: meters\/feet\/yards\u003cbr\u003e* Short Circuit Distance Indication: Detects distance to cable short fault\u003cbr\u003e\u003cbr\u003e1.4. Cable Tracing Test:\u003cbr\u003e* Applicable Cables: Cat5, Cat6\u003cbr\u003e* Output Signal Voltage: 5V±1.0Vp-p (Audio Mode)\u003cbr\u003e* Volume at 0cm from Probe: \u0026gt;105dB\u003cbr\u003e* Volume at 30cm from Probe: \u0026gt;80dB\u003cbr\u003e* Audio Transmission Frequency: 455kHz\u003cbr\u003e* Cable Tracing: Supported\u003cbr\u003e* Anti-Interference Mode: Supported\u003cbr\u003e* Maximum Audio Transmission Distance: RJ45 1000 meters\u003cbr\u003e\u003cbr\u003e1.5. POE Test:\u003cbr\u003e* Voltage Test Range: DC 5–60V\u003cbr\u003e* Power Wire Core\/Bridging Method: End Bridging\/Mid Bridging\/8-core Power\/Unknown\u003cbr\u003e* Standard Identification: Non-standard, IEEE 802.3at\/af\u003cbr\u003e\u003cbr\u003e1.6. Port LED Flashing:\u003cbr\u003e* Switch Type: 10M\/100M\/1000M\u003cbr\u003e\u003cbr\u003e2. Other Parameters:\u003cbr\u003e* NCV Tester Function: AC 80V–1000V, 50Hz\/60Hz\u003cbr\u003e* Headphone Function: Supported\u003cbr\u003e* LED Illumination: Supported\u003cbr\u003e* Power Supply: 3.7V 1400mAh Polymer Lithium Battery\u003cbr\u003e* Automatic Power Off: 30 minutes\u003cbr\u003e* Pair Interface: RJ45\u003cbr\u003e* Transmitter Dimensions: 125mm × 70mm × 32mm\u003cbr\u003e* Receiver Dimensions: 198mm × 50mm × 30mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePacking List:\u003c\/b\u003e\u003cbr\u003e* 1 × Transmitter\u003cbr\u003e* 1 × Receiver\u003cbr\u003e* 1 × RJ45 Network Cable\u003cbr\u003e* 1 × RJ11 Telephone Cable\u003cbr\u003e* 1 × Pair of Alligator Clips\u003cbr\u003e* 1 × Type-C Charging Cable\u003cbr\u003e* 1 × User Manual\u003cbr\u003e* 1 × Tool Bag\u003cbr\u003e* 1 × Certificate of Conformity\/Warranty Card\u003cbr\u003e* 1 × Precaution Card\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackaging Details:\u003c\/b\u003e\u003cbr\u003e* Weight: 0.6kg\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products, Audio Amplifer and Decoders","offers":[{"title":"Default Title","offer_id":41019770535985,"sku":"98112","price":69.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/1755653981-1.jpg?v=1780024598","url":"https:\/\/www.thanksbuyer.com\/fr\/products\/nf-8209-pro-nf-8209pro-cable-tracker-network-cable-tester-ncv-detector-with-led-lighting","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}