FTTH RY F600P Automatic Intelligent Fusion Splicing Optical Fiber Fusion Splicer Machine

FTTH RY F600P Automatic Intelligent Fusion Splicing Optical Fiber Fusion Splicer Machine

Feature:
1. 5.6 inches high Resolution LCD display
2. Average splice time: 8 seconds
3. Average tube-heat time: 28 seconds
4. Lithium battery: up to 200 times of continuous splice and heat
5. Simultaneous X and Y views with 250 times magnification
6. New developed technology providing wind and dust resistance
7. USB Port
8. Multipurpose optical fiber fixture (Such as: Rubber-insulated wire, fiber optic patch cord, bare fiber)
9.Size: 169*152*155 (mm)
10.Operation mode: automatic, semi automatic, manual

Specification:     
1.Typical Splicing Time: 8 Seconds~15 Seconds
2.Typical Heating Time: 30 Seconds~90 Seconds
3.Stable Performance Of Dual Observation, Tune Core Type Fusion Machine
4.Comply With ROHS And WEEE Standard
5.Shockproof, Dustproof, Rainproof
6.Display Magnification: 250 Times (Single Fiber Display)
7.Large Capacity Lithium Battery, You Can Charge It While Splicing, Splicing And Heating 8.Reach To 200 Times With Full Power Charged
9.Long Battery Life, Charging Times Of Up To 300-500 Cycles
10.Bright Low-Power LED Lights, To Ensure Normal Splicing At Low Light Conditions
11.5.6 Inches LCD Screen, Anti-Reflective Surface With A Transparent Protective Plastic
12. Interface Is Simple, With Humane, Intelligent Menu Design
13.USB Port For Easy Data Download And Software Updates
14.Recessed Wind Cover, Can Perform Splicing At 15M / S Strong Winds
15.Guarantee The Quality Of Splicing With 5000m Altitude
16.High-Accuracy V-Groove, High Precision, Good Abrasion Resistance

Product introduction:
- FTTH welding machine, multifunctional fixture, suitable for all kinds of work you need
- Ultra light weight, ultra small size, easy to carry and field construction
- The machine 1.8kg, 0.3KG battery, the total weight of 2.1kg
- 6 seconds fast welding time, 25 seconds of heating time, improve work efficiency
- The visible bidirectional graphics browsing interface, greatly convenient for users
- Super large capacity lithium battery, prolong the time limit of the construction field
- LCD display - thin, light and beautiful; unique transparent screen protection board, safe and reliable
- The humanized 3D graphical interface, make the operation more convenient, intuitive menu interface
- The work area to accelerate the graphics processing system, so that the screen display more smoothly
- The intelligent discharge calibration system, automatic adjustment of arc discharge intensity increases with the temperature and humidity of air pressure the world's most sophisticated optical fiber recognition technology, accurate identification of various kinds of optical fibers

Technical parameters:
- For optical fiber type: SM (ITU-TG.652) /MM (ITU-TG.651/DS (ITU-TG.653) /NZDS (ITU-TG.655) /ITU-TG.657A/ITU-TG.657B
- Core number type: single core
- Applicable fiber diameter: 0.25mm/0.9mm/2.0mm/2.4mm/3.0mm/IndoorCabie (Pi Xianlan)
- Fiber placement and cutting length: diameter 250um-1000um coating layer (8-16mm cutting length)
- Welding mode: can store 64 kinds of mode, preset 24 kinds of welding mode
- Typical weld losses: SM:0.02dB/MM:0.01dB/NZDS:0.04dB/G.657:0.02dB (can be measured in accordance with - ITU-T standard method)
- Echo loss: > 60dB
- The attenuation of welding function:Through the built-in fixed attenuation function to set the 0.1dB to 20dB (0.1B step) with high splicing loss
- Welding time: QUICK SM mode: 6-7 seconds
- Weld loss estimates: there is
- Heater / heating time:
- The built-in heater can store 32 heating modes / typical heat shrinkable tube heating time was 35 seconds
- Application of 6 kinds of heat shrinkable tube length: 10mm, 20mm.30mm, 40mm, 50mm.60mm
- Welding results storage: the internal storage of the 2000 latest records
- Tensile test: 1.96 ~ 2.25N (according to the type of optical fiber)
- Operating condition: 0 ~ 5000m, 0~95%, -10~50, 15m/s,
- Storage conditions: 0 to 95% relative humidity, -40 ~ 80, the battery: -20 ~ 30 for long-term storage
- Size / color: 163.3 * 143.4 * 137.5mm (length x width x height) / green system
- Observation and display mode:
- Two cameras, 4.3 inch color LCD (surface with high strength anti impact protection layer)
- Fiber amplifier and display: X/Y single display (300 times magnification) or X/Y (also shows a magnification of 180 times)
- Power supply: DC input for 18V
- Battery melting and heating times:
- Typical times for 150 times (weld + heating) battery: 4200mAh
- Electrode life: 3000 times
- Port: USB2.0 used to store upgrade
 
Ultra light weight ultra small volume and convenient carrying and field construction  seconds fast weld joint time second heating time  6 improve work efficiency 25 Visual bidirectional graph browsing interface  ignificantly convenient user large capacity lithium battery extend the field construction of the use time limit  thin display  light and beautiful a unique transparent screen protecting plate LCD safe and reliable  Human  graphical interface  to make the menu interface operation more simple intuitive Graphic accelerated processing system so that the screen display more fluencintelligent discharge calibration system 3D with temperaturehumiditypressure automatic regulating arc discharge intensity Using the world's most cuttingedge technology to identify the fiber accurate identification of all kinds of fiber optic core to core alignment function in different brands of optical fiber connection can give full play to the effect  the  end  user system upgrade and data storage operation more convenient .
- Complete environmental design  in line with EU environmental standards  a highly sealed wind design  in a variety of harsh environments can stillwork weldingtechnology USB core direct vision method  the application of the optical fiber average loss and return loss  welding time of typical weldconnection RoHScutting length diameter less than the fiber diameter greater than  fiber.