HamGeek T12 Soldering Iron Station T12-A 50-700℃ 1.3" Digital Screen Automatic Sleep for JBC 936

HamGeek T12 Soldering Iron Station T12-A 50-700℃ 1.3" Digital Screen Automatic Sleep for JBC 936

Reasons for choosing this soldering station:
- Small size, anti-static function, all aluminum alloy shell. Durable and convenient.
- 8 seconds to melt tin, ready to use. Using a special algorithm, its temperature recovery effect is very good
- It is convenient to change the tip, directly plug and replace, without power failure
- We can offer various soldering iron tips at affordable prices
- Provide schematic diagram and firmware, making it easy to maintain and upgrade
- You can modify the boot LOGO yourself to meet your individual needs
- Cost-effective
- Supported languages includes Simplified Chinese, Traditional Chinese, and English. Customers can switch languages freely
- 3 kinds of soldering iron tip parameters can be saved
- Safer to use: power-on password, password lock temperature
- Easy to set and powerful to work. Automatic sleep, shutdown, screen off, temperature compensation, and screen saver

Features:
- The supported languages are Simplified Chinese, Traditional Chinese, and English. Customers can switch languages freely
- The adjustable temperature of soldering station is 50-700℃. When the temperature is 600℃, the tip of the soldering iron turns red. Remember not to use it at high temperature, because high temperature has a great impact on the life of the soldering iron tip. When using for a long time, it is recommended that the temperature should not exceed 450℃
- A DC hole is added on the rear side panel for external battery to supply power, sleep socket interface and the like
- Working voltage: 100V-260V universal
- Built-in 240w high-power power supply can drive high-power soldering iron cores such as JBC and T20
- Fully compatible design: compatible with all 24V thermocouple temperature measurement heating elements such as T12, 936, JBC, T20, etc.
- A comprehensive circuit improvement has been made to improve stability and convenience. The control board integrates over-current protection to prevent temperature runaway caused by MOSFET breakdown due to short circuit of handle or soldering iron tip
- Differential input of temperature measurement signal, thermocouple and control circuit can be completely independent. Stronger anti-interference ability makes it easy to use
- Dedicated power supply, the maximum output current is 24V10A, which can meet the high current requirements of high-power soldering iron cores such as JBC and T20
- The power of the T12 heating core is 72W; the fastest speed can be achieved at 24V
- Soldering station has upgraded its V8.0 control board. Compatible with the new version of T12, JBC, T20, 936 and other soldering irons (it is believed that all soldering irons for thermocouple temperature measurement are supported)
- At the same time, this upgrade isolates the clock chip and display screen in the board, which greatly improves its stability and facilitates fault diagnosis
- The current firmware is upgraded to V12.0. Power-on password lock, password lock temperature, 4 kinds of iron tip parameters save and recall functions. Double-click and single-click shortcut keys (functions include one-key strong temperature, one-key shutdown, one-key sleep, three-level temperature switching, soldering iron tip, switching and other functions. These functions can be freely defined by the user), vibration switch sensitivity setting, reminder volume and frequency adjustment, sleep time adjustment, shutdown time adjustment, automatic screen shutdown, low voltage alarm and more than 20 personalized settings. Each feature can be optionally turned off and on. There are many options for the screen saver display mode (only display temperature, display clock, display LOGO, etc.)
- Ordinary users can use the default settings directly without setting. You can also restore the default value directly. Simple and easy to use. Press and hold the knob for 3 seconds and release it after hearing a beep, it will enter the menu. No manual required, it is easy for users to set up
- Ready to use: The device has been calibrated for temperature
- The heating core and the tip are integrated
- The soldering station has three built-in temperature correction parameters for the soldering iron tip that can be switched at any time. No. 1 soldering iron tip - Shenzhen tip, No. 2 soldering iron tip - Xi'an tip, No. 3 soldering iron tip - original tip. Users can also correct the parameters according to the actual situation
- Fast heating, good temperature recovery characteristics
- All software and hardware are independently developed, schematic diagram and program firmware are provided, and users can modify the boot LOGO
- Comprehensive and complete function settings. Basically every function can be freely set by the user to meet your personalized needs
- The chip used in this soldering station is STC15F2K60S2, with a capacity of up to 60K, leaving enough space for program upgrades
- With a blue LCD screen
- It uses an advanced rotary encoder, which can rotate without limit; no problems such as poor contact
- The default sleep enable time is 3 minutes. If the frequency of use is very high, you can also set the sleep time to be shorter. At the same time, set the dormancy temperature to about 250°C. In this way, when sleeping, it will maintain a temperature of 250°C (the tip will not oxidize), and when it wakes up, it can rise to the temperature you set in one second. At the same time, the soldering station will automatically shut down after sleeping for a certain period of time (not really shut down. It just stops heating, and you must press the knob to wake up the soldering station. Vibrating the handle and turning the knob will not wake up the soldering station)

Package Included:
- 1 x Main Unit
- 1 x Soldering Iron
- 1 x Soldering Handle
- 1 x Power Cable

Note:
- Soldering iron stand is not included.
- Battery is not included.