• Hobbywing Brushless ESC XRotor Micro 60A 4IN1 BLHeli-32 DShot1200 Suitable For 130-300MM FPVs
  • Hobbywing Brushless ESC XRotor Micro 60A 4IN1 BLHeli-32 DShot1200 Suitable For 130-300MM FPVs
  • Hobbywing Brushless ESC XRotor Micro 60A 4IN1 BLHeli-32 DShot1200 Suitable For 130-300MM FPVs

Hobbywing Brushless ESC XRotor Micro 60A 4IN1 BLHeli-32 DShot1200 Suitable For 130-300MM FPVs

Availability: Out Of Stock

  • Price:$56.61
  • Price in reward points: 566 Reward Points: 6
  • Quantity 3+ units 10+ units 30+ units 50+ units More
    Price /Unit $55.48 $54.35 $52.65 $50.38 Contact US
Quantity:

Hobbywing Brushless ESC XRotor Micro 60A 4IN1 BLHeli-32 DShot1200 Suitable For 130-300MM FPVs

Overview:

Highly Integrated
With a similar size of a FC, the 4IN1 ESC includes 4 high performance 60A BLHeli_32DShot1200ESCs, a 5V BEC which can provide power for devices (i.e. FC), and a voltmeter which allows FC to monitor the amp & volt in real time. Two ways for connecting the ESC to a FC: 1) Connecting via soft cables. 2) Soldering via solder tabs are provided for selection. And the shock-absorbing design of mounting holes effectively reduces the external vibration's impact on high-sensitivity components and provides great shock-absorbing protection to upper devices (i.e. FC) . This ESC is designed for FPV racing.

High Quality Hardware
3-Large-size MOSFETs imported from Japan make the 4IN1 ESC have greater voltage/current endurance than the last generation (at high voltages). The use of high performance 32-bit microprocessors with operating frequency of upto48MHz, imported high quality ceramic capacitors, 3-ounce copper, 6 layers of PCBs guarantees less heat, higher efficiency and rapid response. Imported Top Quality MOSFETs, Imported High Quality Ceramic Capacitors, High-performance 32-bit Microprocessor, 3-in-1 Drive ICs.

BLHeli-32 Firmware Ready
The ESC flashed with the 3rd-generation BLHeli-32 firmware has great performance & rich functions and supports adjusting parameters or upgrading firmware via different ways (.e. via throttle signal wire with using other development board or a FC flashed with the firmware for Cleanfight/Betaflight).

DShot1200 Ready!
Besides the regular PWM mode, Oneshot125/Oneshot42/Multishot modes, DShot150/300/600 modes, the latest DShot1200 mode is also supported. In DShot1200 mode, the ESC has great anti-interference performance and rapid response.

Hardware Generated PWM & Damped Light Mode
The ESC firmware uses hardware generated motor pwm for smooth throttle response and silent operation. Damped light does regenerative breaking, causing very fast motor retardation, and it inherently also does active freewheeling.

Specifications:
- Product Name: XRotor Micro 60A 4in1 BLHeli_32 DShot1200
- Product Number: 30902063
- Cont./Peak Current: 60Ax4/80Ax4
- Input Voltage: 3-6S Lipo
- BEC output: 5V & 0.6A
- Wires & Connectors:
- Input Wires: Red-12AWG-130mm/Black-12AWG-130mm
- Output Wires: No wires but solder tabs
- Input Connectors: XT60 (w/Wires Soldered on)
- Output Connectors: No (Note: All the wire length above is the original length not the length you see from the outside.)
- Firmware: Hobbywing_XRotor_BLHeli-32 Firmware
- ESC Programming: BLHeliSuite32
- Stick Programming: Supported
- DEO: Supported
- Throttle Range Calibration: Supported
- Oneshot125 Mode: Supported
- Oneshot42 Mode: Supported
- MultiShot Mode: Supported
- DShot150/300/600/1200: Supported
- Timing: Supported
- Motor Rotation: Supported
- Size: 52x42x6.6mm
- Weight: 15g
- Applications: 130-300mm FPVs

Package Included:
- 1 x ESC Board

Write a review

Note: We will keep it confidential.
Note: HTML is not translated!
 
Captcha