iBasso DC06 MQA Decoder Headphone Amplifier-Dual DAC/HiFi DSD256X 384kHz/32bit With ES92219C 3.5/4.4mm Output

iBasso DC06 MQA Decoder Headphone Amplifier-Dual DAC/HiFi DSD256X 384kHz/32bit With ES92219C 3.5/4.4mm Output

Description:
- MQAs can provide high resolution playback at low data rates, solving the problem that high-resolution audio files are too large when streaming media. With Tidal and other MQA-supporting playback software, DC06 can realize MQA 16X expansion.
- Where 2X is expanded by software (unfolding), 8X is rendered by DAC hardware (Hardware rendering).
- When THD + N is less than - 101Db, the output power is still as high as 320mW@32Ω. At the same time, it can effectively reduce the power consumption of mobile devices. It is more advantageous in thrust, endurance and heat dissipation.
- Since the output level of DC06 is as high as 4Vrms, even if the volume is 1 on some Android devices, the volume may be very high. Therefore, it is recommended that you install a dedicated Android APK-iBasso UAC to achieve more accurate volume adjustment.
- Parameter:
3.5mm single-ended output:
maximum non-distortion level: 2Vrms (32Ω Load), THD+N <-97dB
SNR: 120dBA
Dynamic range: 120dBA
THD+N: <0.0007% (32Ω Load) / <0.00056% (600Ω Load)
Output impedance: <0.3Ω
Resolution: 118dB (No load) 66dB (32Ω load)
4.4mm balanced output:
maximum non-distortion level: 4Vrms (300Ω Load), THD+N <-102dB; 3.2Vrms (32Ω Load), THD+N <-101dB
SNR: 123dBA
Dynamic range: 123dBA
THD+N: <0.0005% (32Ω Load) / <0.00035% (600Ω Load)
Output impedance: <0.5Ω
Resolution: 142dB (No load) 132dB (32Ω load)
PCM: 32bit/384kHz
DSD: Native DSD256
MQA: 16X expansion
Weight: 23g
Dimension: 50mm x 19.7mm x 14mm / 50mm x 23.2mm x 14mm

Package Included:
- 1 x Decoder Headphone Amplifier

Note: DC06 must be used under the Android device environment of Android 5.1 and above systems and is affected by the device system or hardware. There may be compatibility differences on a few Android devices.