{"product_id":"6-axis-mach3-controller-board-cnc-motion-controller-support-usb-ethernet-for-cnc-engraving-machine","title":"6 Axis Mach3 Controller Board CNC Motion Controller Support USB + Ethernet For CNC Engraving Machine","description":"\u003cp\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-01.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e- It also has dual USB\/Ethernet (Ethernet) interfaces.\u003cbr\u003e- 100M Ethernet interface, built-in network transformer isolation, supports long-distance wired connection. With wireless router, it can realize the wireless connection between PC (notebook computer) and motion control board.\u003cbr\u003e- Support 6-axis linkage, 500KHz output at the same time, connected to servo\/stepping. Any one axis can be configured as a pulse spindle.\u003cbr\u003e- 2 real-time electronic handwheel (MPG) input ports, which can connect 2 electronic handwheels at the same time. When the MACH3 electronic handwheel is set in Multi-Step mode, it has the same real-time performance as the CNC machining center, and runs smoothly. There is no delay in the control board, and the performance of the mechanical system is fully utilized.\u003cbr\u003e- With real-time jog, the control panel has no delay, the motor responds quickly and flexibly, and the experience is zero delay.\u003cbr\u003e- 18 general digital input points, corresponding to 1 LED indicator, self-defining configuration function in MACH3.\u003cbr\u003e- 8 general-purpose digital output points, configurable as: spindle start\/stop\/coolant\/custom M code VBasic programming control\u003cbr\u003e- 1 PWM output point for analog spindle speed control: pulse width speed control \/ 0-10V inverter speed control.\u003cbr\u003e- 2 analog inputs, used to adjust the processing speed \/ jog speed \/ spindle speed.\u003cbr\u003e- 1 status indicator, which can prompt USB\/Ethernet (Ethernet) connection, and various statuses of the motor are clear at a glance.\u003cbr\u003e- It adopts 6 dual-channel 10Mhz high-speed optocouplers and 28 general optocouplers, totaling 34 optocouplers to isolate all inputs\/outputs. Onboard an isolated power supply, high-cost design provides complete anti-interference performance and complete safety protection.\u003cbr\u003e- 168M speed, without PC intervention, the signal is processed independently by the motion control card, to ensure that you have real-time and reliability.\u003cbr\u003e- Support all versions of Mach3. Support for all versions of Windows XP to Windows10 (32-bit\/64-bit), and no driver is required, all versions for Windows are plug and play.\u003cbr\u003e- The chip firmware supports upgrades, and users can continuously get the latest function support.\u003cbr\u003e- Provide a complete installation manual with clear documentation, illustrations and detailed descriptions.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEnvironmentally friendly copper pluggable terminals\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69209\/69209-02.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003e100M Ethernet interface \/ USB interface \/ isolated power supply\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69209\/69209-03.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eNetwork cable connection\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-04.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eUSB cable connection\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-05.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003e6-axis output signal (direction signal + pulse signal): 10MHz high-speed optocoupler isolation x12 channels\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-06.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eOptocoupler isolation PWM spindle speed control signal output x1 \/ Optocoupler isolation general output x8\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-07.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003ePower input: self-recovery fuse + anti-reverse diode + TVS anti-surge diode\u003cbr\u003eOptocoupler isolated NPN input x16\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-08.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eExternal magnification knob\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-09.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eConnect Controller Board To Laptop PC:\u003cbr\u003eConnection Via USB Cable\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-10.jpg\" style=\"width: 652px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eDirection Connection Via Ethernet Cable\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-11.jpg\" style=\"width: 652px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eNetwork cable passes through a router\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-12.jpg\" style=\"width: 651px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eWireless network (WLAN)\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-13.jpg\" style=\"width: 635px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eDownload Manual (EDG381) 1.0.7 version (ZIP\/\u003c\/b\u003e17M\u003cb\u003e). \u003c\/b\u003e\u003cbr\u003e\u003ca href=\"http:\/\/leafboy77.com\/files\/usb_eth_edg381\/Mach3_USB_Ethernet_Motion_Board(EDG381)Installation_Manual(english).zip\"\u003ehttp:\/\/leafboy77.com\/files\/usb_eth_edg381\/Mach3_USB_Ethernet_Motion_Board(EDG381)Installation_Manual(english).zip\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDownload Plugin (eMotionMach3.ZIP\/0.3M) 1.2.1.0 version. \u003c\/b\u003e\u003cbr\u003e\u003ca href=\"http:\/\/leafboy77.com\/files\/usb_eth_edg381\/eMotionMach3.zip\"\u003ehttp:\/\/leafboy77.com\/files\/usb_eth_edg381\/eMotionMach3.zip\u003c\/a\u003e\u003cbr\u003e\u003cb\u003e\u003cbr\u003eDownload Latest Mach3:\u003c\/b\u003e\u003cbr\u003e\u003ca href=\"http:\/\/www.machsupport.com\/software\/mach3\/\"\u003ehttp:\/\/www.machsupport.com\/software\/mach3\/\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSchematic Diagram:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eUSB main control chip + external magnification knob x2\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-14.jpg\" style=\"width: 750px;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003e10MHz high-speed optocoupler isolation x12 channels\u003cbr\u003eOptocoupler isolated NPN input x16 + Optocoupler isolated PNP input x2\u003cbr\u003eOptocoupler isolation general output x8 + Optocoupler isolation PWM spindle speed control signal output x1\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-15.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003eEthernet interface chip\u003cbr\u003e\u003c\/b\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-16.jpg\" style=\"width: 750px;\"\u003e\u003cb\u003e\u003cbr\u003e\u003cbr\u003ePower + isolated power\u003c\/b\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/www.byimg.com\/catalog\/69210\/69210-17.jpg\" style=\"width: 750px;\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Set of CNC Controller Board\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003e\u003cbr\u003eNote:\u003cbr\u003e- Other items are not included, for demonstration purposes only. Thank you for your understanding!\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40826357252145,"sku":"69210","price":164.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7077428494385_watermarked_0.jpg_0.png?v=1767895978","url":"https:\/\/www.thanksbuyer.com\/it\/products\/6-axis-mach3-controller-board-cnc-motion-controller-support-usb-ethernet-for-cnc-engraving-machine","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}