{"product_id":"hamgeek-pluto-pro-upgraded-v0-37-sdr-radio-70mhz-6ghz-ad9363-2tx-2rx-transceiver-for-gigabit-ethernet","title":"HamGeek Pluto Pro+ Upgraded V0.37 SDR Radio 70MHz-6GHz AD9363 2TX 2RX Transceiver for Gigabit Ethernet","description":"\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eOptional Configurations:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e* Without Antennas\u003c\/div\u003e\n\u003cdiv\u003e* With Four Antennas\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003eHamGeek Pluto Pro+ is a software-upgraded version developed from the original Pluto SDR platform. It supports dual transmit and dual receive at the antenna interface, allowing all four SMA ports to be used.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eIt is a powerful software-defined radio (SDR) platform featuring 2TX and 2RX operation, Gigabit Ethernet connectivity, and Micro SD card support. Designed with reference to the well-known ADI ADALM-PLUTO architecture, HamGeek Pluto Pro+ enhances the original design by addressing some of its limitations and providing improved flexibility for SDR applications.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e* ADC\/DAC: AD9363 (Can be hacked to AD9361 or AD9364)\u003c\/div\u003e\n\u003cdiv\u003e* Channels: 2 Transmit Channels, 2 Receive Channels\u003c\/div\u003e\n\u003cdiv\u003e* RF Range: 70MHZ~6GHZ\u003c\/div\u003e\n\u003cdiv\u003e* Reference Clock: VCTCXO 40MHz, 0.5ppm\u003c\/div\u003e\n\u003cdiv\u003e* SOC: Zynq7010 FPGA, 28K Logic Cells\u003c\/div\u003e\n\u003cdiv\u003e* RAM: 512MB\u003c\/div\u003e\n\u003cdiv\u003e* FLASH: 32MB\u003c\/div\u003e\n\u003cdiv\u003e* USB: USB2.0, supports OTG\u003c\/div\u003e\n\u003cdiv\u003e* Ethernet: 1000Mbps\u003c\/div\u003e\n\u003cdiv\u003e* Micro SD: Supports booting from Micro SD card\u003c\/div\u003e\n\u003cdiv\u003e* DC Input: 5V±0.5V, 2A (Micro USB)\u003c\/div\u003e\n\u003cdiv\u003e* Shell: Aluminum alloy shell\u003c\/div\u003e\n\u003cdiv\u003e* Signal Bandwidth: 200KHz-20MHz (AD9363)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eInterfaces:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003ePlease note that all IO levels are 1.8V.\u003c\/div\u003e\n\u003cdiv\u003e3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052.\u003c\/div\u003e\n\u003cdiv\u003e3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46\u003c\/div\u003e\n\u003cdiv\u003e3.3 When using SD card to boot, please connect SD-H to 1V8\u003c\/div\u003e\n\u003cdiv\u003e3.4 When using JTAG to debug, please connect JTAG# to GND\u003c\/div\u003e\n\u003cdiv\u003e3.5 Please connect EXCLK to GND when using external reference clock input\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePTT Key Port:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e* PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eDFU KEY:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e* At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eRef CLK Input IPEX:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e* You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface.\u003c\/div\u003e\n\u003cdiv\u003e* The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eCalibrate the Frequency of Built-in VCTCXO:\u003c\/div\u003e\n\u003cdiv\u003e* The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003eMicro-SD:\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e* Support booting via SD card, need to connect SD-H jumper to 1V8.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePacking List (Depending on Selected Configuration):\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eWithout Antennas:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e* 1 x HamGeek Pluto Pro+ SDR radio\u003c\/div\u003e\n\u003cdiv\u003e* 2 x USB cables\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003eWith Four Antennas:\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e* 1 x HamGeek Pluto Pro+ SDR radio\u003c\/div\u003e\n\u003cdiv\u003e* 2 x USB cables\u003c\/div\u003e\n\u003cdiv\u003e* 1 x 8dBi 2.4GHz\/5GHz\/5.8GHz antenna\u003c\/div\u003e\n\u003cdiv\u003e* 1 x 5dBi 40MHz-860MHz antenna\u003c\/div\u003e\n\u003cdiv\u003e* 1 x 40MHz-6GHz telescopic antenna\u003c\/div\u003e\n\u003cdiv\u003e* 1 x 12dBi 700MHz-2700MHz antenna\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan style=\"color: rgb(255, 42, 0); background-color: rgb(255, 255, 0);\"\u003e\u003cb\u003ePackaging Details (Depending on Selected Configuration):\u003c\/b\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e* Package weight: 0.4kg (Without Antennas); 1kg (With Four Antennas)\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote:\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003e* It is assembled and ready to use.\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003e* SD card is not included in the package.\u003c\/span\u003e\u003c\/b\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cimg src=\"https:\/\/www.comseek.com\/image\/catalog\/104501\/104501-01.jpg\"\u003e\u003cbr\u003e\n\u003c\/div\u003e","brand":"HamGeek","offers":[{"title":"Without Antennas","offer_id":41188655398961,"sku":"104501","price":187.0,"currency_code":"USD","in_stock":true},{"title":"With Four Antennas","offer_id":41188655431729,"sku":"104502","price":208.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/104501-1.jpg?v=1788168870","url":"https:\/\/www.thanksbuyer.com\/it\/products\/hamgeek-pluto-pro-upgraded-v0-37-sdr-radio-70mhz-6ghz-ad9363-2tx-2rx-transceiver-for-gigabit-ethernet","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}