{"product_id":"vas-5054a-full-chip-version-with-oki-odis-uds-for-vw-audi-obd2-diagnostic-with-bluetooth","title":"VAS 5054A Full Chip Version with OKI ODIS UDS for VW AUDI OBD2 Diagnostic with Bluetooth","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003eThe VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.\u003cbr\u003eThe integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.\u003cbr\u003eNo cables are needed for vehicle diagnostics using the VAS 5054A.\u003cbr\u003eThe range of the wireless Bluetooth connection is 2 to 5 meters,depending on the environment and the type of Bluetooth adapter used on the PC side.\u003cbr\u003eThe Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.\u003cbr\u003e\u003cbr\u003eThe vehicle protocols are handled directly in the VAS 5054A.\u003cbr\u003eThis ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.\u003cbr\u003eThe diagnostic application and the associated Diagnostic Base System are installed on the application PC.\u003cbr\u003eThe diagnostic base system can access the VAS 5054A via Bluetooth or USB.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAccess via Bluetooth:\u003c\/b\u003e After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAccess via USB:\u003c\/b\u003e You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eThe Following Vehicle Bus Systems are Supported:\u003c\/b\u003e\u003cbr\u003eK line (ISO9141-2)\u003cbr\u003eHigh-speed CAN (ISO 11898-2)\u003cbr\u003eLow-speed CAN (ISO 11898-3)\u003cbr\u003eJ1850 (SAE J1850)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eODIS system V3.0.3 Introduction:\u003c\/b\u003e\u003cbr\u003eODIS System integrates VW Group's main application system, improves greatly on the efficiency of diagnosis.\u003cbr\u003eODIS System provide flexible fault diagnosis, clear data test display, convenient diagnosis entrance.\u003cbr\u003e　\u003cbr\u003e\u003cb\u003eODIS System V3.0.3 Advantages:\u003c\/b\u003e\u003cbr\u003e* Realizing higher quality and lower cost on repair through high-efficiency diagnosis process!\u003cbr\u003e* The GFF database guided by centralized management posts fault information and solution directly.\u003cbr\u003e* A full range of integration from developing to after sale service makes procedure basis reliable.\u003cbr\u003e* The integration of diagnostic system (eg : Elsa pro) further enhances the core processes of service.\u003cbr\u003e* Systematically optimizes technician’s diagnostic procedure and saves their time cost.\u003cbr\u003e* The optimization of diagnostic procedure makes the distributor’s cost reasonable.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eODIS V3.0.3 System Requirements:\u003c\/b\u003e\u003cbr\u003eWindows XP \/ VISTA \/ 7, both 32bit and 64bit\u003cbr\u003eSystem C:\/\/ have to be \u003cspan style=\"color: #ff0000;\"\u003eNTFS\u003c\/span\u003e format\u003cbr\u003eC:\/\/ need to have at least 20GB space for installing ODIS Software\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFunctions:\u003c\/b\u003e\u003cbr\u003e* Diagnostic logs are saved automatically.\u003cbr\u003e* You can choose a dynamic brand layout. This changes then depending on the brand of the vehicle.\u003cbr\u003e* The special functions are represented thematically sortedly.\u003cbr\u003e* You have the possibility to generate a self diagnostic log.\u003cbr\u003e* You can check the connections to backend systems.\u003cbr\u003e* The enforcement of an update was optimized.\u003cbr\u003e* The data-download is carried out in the background.\u003cbr\u003e* An intermittent download is continued automatically.\u003cbr\u003e* You have the option to shut down the system after an update automatically.\u003cbr\u003e* If no online-connection exists, the login-dialog is skipped in the diagnosis entry.\u003cbr\u003e* The Test Instruments view is printed with white background.\u003cbr\u003e* You have the possibility to use a standard mail client to send a support message.\u003cbr\u003e* Certain equipment features can be set, if fitted, manually e.g. national variant.\u003cbr\u003e* There is a mode self diagnostic.\u003cbr\u003e* The self diagnostic can be used also in the case of works with order.\u003cbr\u003e* OBD-functions can be carried out in the self diagnostic.\u003cbr\u003e* Various small optimizations at the graphical user interface.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eODIS Service 3.0.3 Release Note\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003eThis release contains software bugfixes\u003cbr\u003e\u003cbr\u003e\u003cb\u003eBugfixes\u003c\/b\u003e\u003cbr\u003e• VCI exchange not documented in diagnostic protocol\u003cbr\u003e• Internal defects\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRelease 3.0.3\u003c\/b\u003e\u003cbr\u003eThis release is a new base version with new functions. It has to be installed via SingleSetup.\u003cbr\u003eReboot after installation\u003cbr\u003e!!! Reboot Windows after installation of ODIS Service!\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: #ff0000;\"\u003e\u003cb\u003eNew functions\u003c\/b\u003e\u003c\/span\u003e\u003cbr\u003e• ODIS Service SingleSetup does not install Adobe Reader.\u003cbr\u003e• ODIS Service SingleSetup does not install Virtual Keyboard.\u003cbr\u003e• Support of diagnostic interface VAS6154.\u003cbr\u003e• It is possible to flash an old ECU software version.\u003cbr\u003e• Display of ECU flashability in self-diagnosis is improved.\u003cbr\u003e• The contents of the diagnostic protocol are extended.\u003cbr\u003e• Support requests contain hardware and software version of tester PC.\u003cbr\u003e• Order number is used for diagnostic protocol and diagnostic session filenames.\u003cbr\u003e• Improved manual variant identification.\u003cbr\u003e• Display of names of teststeps can be switched off in GFF..\u003cbr\u003e• Stabilization of GFF hotfix mechanism.\u003cbr\u003e• Diagnostic adresses of ECUs are shown with four digts.\u003cbr\u003e• Improvemed access to self-diagnosis functions.\u003cbr\u003e• New hardware configuration manager for VAS5054\/VAS5055.\u003cbr\u003e• Disclaimer changed.\u003cbr\u003e• Changes in ODIS Service update process\u003cbr\u003e• Display of TSB tree without DISS coding.\u003cbr\u003e• Support requests may be stored.\u003cbr\u003e• Display of connection type for diagnostic hardware.\u003cbr\u003e• Support of Internet Explorer 11.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eResolved system defects\u003c\/b\u003e\u003cbr\u003e• Search in Measured Value Tables did not work correctly.\u003cbr\u003e• Increased occurence of error 4009E\u003cbr\u003e• Some immobilizers could not be adapted.\u003cbr\u003e• Missing timestamp when sending support request in diagnostic protocol\u003cbr\u003e\u003cbr\u003e\u003cb\u003eVehicle restrictions\u003c\/b\u003e\u003cbr\u003e• For brand AUDI, the Flash mode is supported.\u003cbr\u003e• For brand Volkswagen PKW, the Flash mode is restricted. The usage is only\u003cbr\u003eallowed if described in technical bulletins.\u003cbr\u003e• Flash mode is not supported for all other brands.\u003cbr\u003e• Only immobilizer components are diagnosable in LT2 vehicles.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSupported vehicle models\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cu\u003eSupported AUDI-Models\u003c\/u\u003e\u003cbr\u003e• All AUDI vehicle models are supported.\u003cbr\u003e\u003cu\u003e\u003cbr\u003eSupported Volkswagen-Models\u003c\/u\u003e\u003cbr\u003e• All Volkswagen vehicle models are supported.\u003cbr\u003e\u003cbr\u003e\u003cu\u003eSupported Volkswagen Nutzfahrzeuge-Models\u003c\/u\u003e\u003cbr\u003e• 2K - Caddy 2004 \u0026gt;\u003cbr\u003e• 7H\/7J - Transporter 2004 \u0026gt;\u003cbr\u003e• 2C - Caddy 2011 \u0026gt;\u003cbr\u003e• 7E\/7F - Transporter 2010 \u0026gt;\u003cbr\u003e• 2H - Amarok 2010 \u0026gt;\u003cbr\u003e• 2E\/2F - Crafter 2006-2015 \u0026gt;\u003cbr\u003e\u003cbr\u003e\u003cu\u003eSupported Seat-Models\u003c\/u\u003e\u003cbr\u003e• All Seat vehicle models are supported.\u003cbr\u003e\u003cbr\u003e\u003cu\u003eSupported Skoda-Models\u003c\/u\u003e\u003cbr\u003e• All Skoda vehicle models are supported.\u003cbr\u003e\u003cbr\u003e\u003cb\u003e\u003cspan style=\"color: #ff0000;\"\u003eCaution:\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e* When performing electric welding on a vehicle with an ABS system, disconnect the battery ground cable and the ABS control module connecting cable. The ABS system will be damaged if the ground cable is not disconnected.\u003cbr\u003e* Before disconnect the battery ground cable in vehicles with an anti-theft radio, make sure the security code is available. If the incorrect code is entered when the voltage supply is restored, the unit may be locked even if the correct code is entered later.\u003cbr\u003e* Only use pneumatic or power wrenches to loosen connections or threaded fasteners. Never use these tools to tighten threaded fasteners. This is especially true for light alloys. Always use a torque wrench to tighten to the specifications provided in the repair manual.\u003cbr\u003e* Make sure the ignition is switched off before connecting the vehicle battery. Failing to do this can damage the engine control module.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x VAS 5054A Unit (Full Chip Version)\u003cbr\u003e- 1 x Bluetooth Adapter \u003cbr\u003e- 1 x USB Cable (Original E256832)\u003cbr\u003e- 2 x DVDs (ODIS Software + English Installation Guide + Video Guide)\u003cbr\u003e\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":40824483217457,"sku":"61104","price":83.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/7076747968561_watermarked_0.jpg_0.png?v=1768054769","url":"https:\/\/www.thanksbuyer.com\/it\/products\/vas-5054a-full-chip-version-with-oki-odis-uds-for-vw-audi-obd2-diagnostic-with-bluetooth","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}