Iteaduino SCSI2SD 5V Analog SCSI-2 HD Mini SD Memory Card Slot for Aruino

Iteaduino SCSI2SD 5V Analog SCSI-2 HD Mini SD Memory Card Slot for Aruino

Description:
- This is an improved version of the popular SCSI2SD. It's smaller, uses less power, and can be powered by the SCSI bus in some cases.
- SCSI2SD emulates a SCSI-2 hard drive using a micro-SD memory card. Each SCSI2SD purchase includes a fully assembled and tested circuit board, ready for use.

A SCSI2SD purchase does NOT include the following:
- Micro-SD memory card
- Bracket for mounting within a 3.5" drive bay.
- SCSI cables, power cables, usb cables, or any other accessory
- SCSI2SD is an and open source project. Please visit the SCSI2SD page at here, where you will find the GPL3+ software source code.

Note: The hardware design for this new board is not currently open source.

Features:
- In-built active terminator.
- Emulates up to 4 SCSI devices
- Supports sector sizes from 64 bytes to 8192 bytes
- Firmware updatable over USB
- Highly configurable over USB
- Selectable SCSI ID
- Selectable parity support
- Enable/disable Unit Attention Condition
- Artificial limits on the SCSI disk size (eg. limit size to 4G to avoid OS bugs)
- Sector size (can also be set via the SCSI MODE SELECT command, as sent by SCSI format utilities).
- External LED connector.

Technical Specifications:
- SCSI Interface: SCSI-2 Narrow 8-bit 50-pin connector. Supports asynchronous transfers only.
- SD Card Interface: Standard SDSC (1GB maximum size)  SDHC, SDXC
- Power: 5V via standard molex drive connector, USB, or SCSI BUS powered (requires the SCSI host to supply terminator power)
- Dimensions: 10cm x 5cm x 2cm

Compatibility:
Plase consult the full compatibilty list at :Click here

Package included:
- 1 x itead Aruino SCSI2SD