Kakute F7 mini Flight Controller & Tekko32 F3 4in1 45A mini ESC Stack for FPV Racing UAV Drone

Specifications:

• MCU: STM32F745VGH6 32-bit processor,216MHz, 320Kbytes RAM, 1Mbytes Flash
• IMU: ICM20689 (SPI)
• Barometer: BMP280
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 5.5 hardware UARTS (UART1,2,3,4,6,7)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
• Onbord 16Mbytes for Blackbox logging
• 5V Power Out: 1.0A max
• 3.3V Power Out: 0.2A max
• Dimensions: 33x26x6mm
• Mounting Holes: Standard 20mm square to center of holes 
• Weight: 4g

Package Includes:
   FC board *1
   M2 Rubber rings *6
   JST SH 8pin 30mm cable*1
   JST SH 8pin 150mm cable*1  

Manual:
Kakute F7 MINI Manual

Tekko32 F3 4in1 45A mini ESC
BLHELI32 / F3 MCU/4x 45A

New BLHELI32 ESC with F3 MCU, give more smooth control and faster responding speed.
4x 45A F3 BLHELI32 ESC in 20x20 standard .
Supports up to 50A burst and 45A continued.

 
SPEC:

• F3 MCU, runs double faster than F051
• 32bit ESC with BLHELI32 firmware
• Supports 3-6S lipo input
• PWM input, TLM supported
• Voltage output (VBAT)
• NO BEC
• Supports oneshot / Multishot / Dshot PWM
• Supports damped light
• Ext. cap needed for 6s (470uf 35v for 6s usage.)
• Mounting holes M2, 20x20mm
• Size:30 x 36 mm
• Weight: 7.8g

Package included:
Tekko32 F3 4in1 45A mini ESC *1
Electrolytic capacito: 470uF 35v *1
8pin to 8pin 1mm pitch 65mm cable *1
8pin to 8pin 1mm pitch 25mm cable *1

PIN MAP: