{"product_id":"12g-sdi-1-channel-fiber-optic-to-sdi-converter-tx-rx-loop-out-4k60hz-support-audio-and-video-synchronous-transmission","title":"12G-SDI 1-Channel Fiber Optic to SDI Converter TX+RX Loop Out 4K60Hz Support Audio and Video Synchronous Transmission","description":"\u003cp\u003e\u003cb\u003eDescription:\u003c\/b\u003e\u003cbr\u003e- The 12G-SDI ultra high definition audio and video optical transceiver is equipped with built-in serial clock recovery, signal equalization, and line driving. It automatically detects input signals such as 12G-SDI\/6G-SDI\/3G-SDI\/HD-SDI\/SDI\/ASI, which comply with SMPTEST2082-1 (12GUHD-SDI), ST2081-1 (6GUHD-SDI), SMPTE424M, SMPTE292M, SMPTE259M, SMPTE297M, SMPTE305M, SMPTE310M Standard.\u003cbr\u003e- The 12G-SDI ultra high definition audio and video optical transceiver supports plug-in SFP optical modules, which can be replaced with corresponding optical modules according to on-site needs. The device has a power consumption of less than 1.5W, uses Type-C port power supply, supports USB power supply system, and has strong flexibility in use.\u003cbr\u003e- The circuit board of the 12G-SDI ultra high definition audio and video optical transceiver adopts a multi-layer design, which is stable, reliable, and has strong anti-interference ability; All components, including connectors, use products from internationally renowned manufacturers with reliable quality; Designed with an aluminum shell, it is corrosion-resistant and has outstanding thermal and electrical conductivity.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eApplication:\u003c\/b\u003e\u003cbr\u003e- SMPTE compatible serial digital interface\u003cbr\u003e- UHDTV\/4K\/8K\/HDTV\/SDTV video\u003cbr\u003e- IP Media Gateway\u003cbr\u003e- Digital video processing and editing\u003cbr\u003e\u003cb\u003e\u003cbr\u003eTechnical Characteristics:\u003c\/b\u003e\u003cbr\u003e- Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G), ST-292 (HD), and ST-259 (SD); Compatible with DVB-ASI and AES10 (MADI).\u003cbr\u003e- Both the transmitter and receiver have clock recovery function; The clock restorer can reduce high-frequency jitter and completely regenerate data using a pure low jitter clock.\u003cbr\u003e- Clock restorer locks at 11.88Gbps, 5.94Gbps, 2.97Gbps, 1.485Gbps or 1.001 sub rate and 270Mbps SMPTE rate.\u003cbr\u003e- The signal input has automatic cable equalization (EQ) function, and the output has drive (CD) function.\u003cbr\u003e- Support plug-in SFP optical modules, which can be replaced with corresponding optical modules at different distances or interfaces according to actual on-site needs.\u003cbr\u003e- Supports single-mode single fiber transmission distance of 20KM (default).\u003cbr\u003e- Support status light display.\u003cbr\u003e- Supports USB device power supply.\u003cbr\u003e- Plug and play, no need for debugging.\u003cbr\u003e\u003cb\u003e\u003cbr\u003eOptical Specification:\u003c\/b\u003e\u003cbr\u003e- Wavelength: 1270nm\/1330nm\u003cbr\u003e- Fiber type: 9\/125um single-mode\u003cbr\u003e- Speed rate: 12Gbps\u003cbr\u003e- Transmitting optic power: 0 - 3dB\u003cbr\u003e- Optic port: LC\u003cbr\u003e- Transmission distance: 20km\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSDI Specification:\u003c\/b\u003e\u003cbr\u003e- Protocol standard: SMPTE ST2082\u003cbr\u003e- SMPTE speed rate: 270Mbit\/s, 1.48Gbit\/s, 2.97Gbit\/s, 5.94Gbit\/s, 11.88Gbit\/s\u003cbr\u003e- Supported standard (digital video format): SMPIE ST-2082, 12G-SDI, 2160P60Hz\u003cbr\u003e- EQ mode cable transmission distance: 75m at 11.88Gbps, 120m at 5.94Gbps, 200m at 2.97Gbps, 300m at 1.485Gbps, 600m at 270Mbps\u003cbr\u003e- Signal amplitude: 800mV±10%\u003cbr\u003e- Impedance: 75ohm\u003cbr\u003e- Connector: BNC, comply with IEC169-8 standard\u003cbr\u003e\u003cb\u003e\u003cbr\u003eRS485 Data Specification:\u003c\/b\u003e\u003cbr\u003e- Standard: comply with EIA RS-485 standard\u003cbr\u003e- Transmission method: synchronous transmission\u003cbr\u003e- Baud rate: 50bps to 520kbps (support non-standard baud rates)\u003cbr\u003e- RS485: 2-wire (A, B), half duplex, point to multi master-slave communication\u003cbr\u003e- Business terminal physical interface\/specifications: industrial terminal\/3.81mm\u003cbr\u003e\u003cbr\u003e\u003cb\u003eRS485 Electrical Specification:\u003c\/b\u003e\u003cbr\u003e- RS-485 pull-up resistor\/pull-down resistor: 4.7kohm, 4.7kohm\u003cbr\u003e- RS-485 terminal resistor: N\/A, 120ohm and 120kohm\u003cbr\u003e\u003cb\u003e\u003cbr\u003ePower Supply Specification:\u003c\/b\u003e\u003cbr\u003e- Input current: ≤300mA\u003cbr\u003e- Input voltage: 5V\u003cbr\u003e- Overload current protection: support\u003cbr\u003e- Power supply physical interface: Type-C\u003cbr\u003e- Power consumption: \u0026lt; 1.5W\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMechanical Structure:\u003c\/b\u003e\u003cbr\u003e- Body material: aluminum alloy\u003cbr\u003e- Size: 100 x 55 x 25mm\u003cbr\u003e- Net weight: 0.15kg\u003cbr\u003e\u003cbr\u003e\u003cb\u003eEnvironment Parameters:\u003c\/b\u003e\u003cbr\u003e- Working temperature: -20℃ to 70℃\u003cbr\u003e- Storage temperature: -40℃ to 85℃\u003cbr\u003e- Relative humidity: 5 to 95% (non-condensing)\u003cbr\u003e- MTBF: \u0026gt;100000 hours\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePackage Included:\u003c\/b\u003e\u003cbr\u003e- 1 x Transmitter\u003cbr\u003e- 1 x Receiver\u003cbr\u003e- 2 x USB Power Adapter\u003cbr\u003e- 2 x Type-C Cable\u003cbr\u003e- 1 x User Manual\u003c\/p\u003e","brand":"Thanksbuyer","offers":[{"title":"Default Title","offer_id":41029006262321,"sku":"101736","price":373.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0578\/4790\/6353\/files\/1778116498-6.jpg?v=1780377218","url":"https:\/\/www.thanksbuyer.com\/ko\/products\/12g-sdi-1-channel-fiber-optic-to-sdi-converter-tx-rx-loop-out-4k60hz-support-audio-and-video-synchronous-transmission","provider":"Thanksbuyer Online,SDR Radio, Testers and Measurement devices, Astronomy products,  Audio Amplifer and Decoders","version":"1.0","type":"link"}