| Quantity | 3+ units | 10+ units | 30+ units | 50+ units | More |
|---|---|---|---|---|---|
| Price /Unit | $125.21 | $122.66 | $118.83 | $113.72 | Contact US |
The Latest DDCS Version4.1 4 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDPMG
$329.72
The Latest DDCS Version4.1 3 Axis Independent CNC Offline Controller Machine and Manual Pulse Generator DDMPG
$310.28
DDCS-V4.1 4-Axis Standalone Motion Controller Offline Controller Support 3 Axis/4Axis USB CNC Controller Interface
$296.11
Description:
- Support all versions of Mach3, including the latest version.
- Support all Windows versions, including Win8 WIN10
- USB does not need to be driven, all Windows versions plug and play and support hot plug.
- USB bus adopts high grade chip magnetic coupling isolation, truly valuable isolation, it is different with the general control card optocoupler isolating input and output, this board with super reliability, and absolutely guarantee the security of the computer USB. At the same time, the super strong EMC anti-interference ability is guaranteed.
- Single chip, the system is more streamlined, which is much better than the general multichip processing mode.
- The dual core ultra high speed CPU (single core maximum frequency 204MHz) has great redundancy in computing power. And ensure the realization of the pulse output frequency of 1000KHz under the 3 axis linkage, the pulse output frequency of 750KHz under the 4 axis linkage, the output frequency of the 6 axis linkage pulse is up to 500KHz, and the servo / step can be connected.
- The size of the motion control buffer can be set to ensure that the fastest interpolation cycle can also operate stably, and the computer can run smoothly when the load is too heavy.
- It has 16 isolation input ports, the input interface is more simple, the port and wet connection can be used, the connection is more simple. As long as the external contact method is connected with a physical switch to the ground line, all 16 input ports have signal instructions.
- It has a maximum of 24 output ports (8 on its own, RS485 expandable), 32 input ports (with 16 inputs, and RS485 16 channels).
- PWM speed regulation output port (isolation), PWM frequency can be set, duty cycle 0~1000 can be adjusted continuously.
- Owning speed measurement function, the spindle's actual speed is displayed in real time in the Mach3 interface, and the measurement is accurate and stable.
- The circuit board is carefully built by engineers, and the design level is clear at a glance.
- With 256 byte NVRAM space, you can save the coordinate values and processing lines of the 6 axes.
- All the output of the motion shaft are differential signals, which can be connected to the servo high speed signal input port.
- It can be set from axis, support double X, double Y, double Z. Soft limit level processing, system more secure
- RS485 isolation bus, which can expand the input and output, or read the servo position, connect the grating ruler and so on.
- Omnidirectional isolation, all input and output are isolated from the core of motion control, and pulse isolation is isolated by high-speed 10M optocoupler. Support single double pulse mode
- Upgrade convenience, this product upgrade hardware layer firmware through USB only brush machine, fast speed, not afraid of brushing, the firmware open, can try 1 hours, more than 1 hours will stop.
Product document download link:
https://pan.baidu.com/s/19q42Opqzca32JNW605NkTw code:eju1
