Maxgeek SKR2-A Genset ATS Controller Generator Control Panel Automatic Transfer Switch Controller Module

Maxgeek SKR2-A Genset ATS Controller Generator Control Panel Automatic Transfer Switch Controller Module

Description:
SKR2 series ATS intelligent controller of company of the second generation of products, the English abbreviation for ATSC (automatic transfer switch controller with MCU as the core technology, accurate detection of two phase voltage and voltage to the appearance of abnormal (loss of power, over-voltage, under pressure, lack of phase) to make accurate judgment, and to the backup generators issued since the start signal, after the preset delay control ATS switch to standby power supply side.

Specification:
Working voltage: AC power L1N1/L2N2 supply, voltage range AC170V-277V
Overall power consumption: S3W (stand mode: ＜1W)
AC voltage input: 3 phases 4 wires (ph-N), AC170V AC277V; single phase 2 wires (ph-N),AC170V AC277V; 2 phases wires (ph-N), AC170V AC277V
Rated frequency: 50/60HZ
1# closing relay output port: 5A AC250V passive output
2# closing relay output port: 5A AC250V passive output
Breaking relay output port: 5A AC250V passive output
Relay output 1: 10A AC250V passive output
Relay output 2: 10A AC250V passive output
Generator start relay: 7A AC250V passive output
1# closing input port: effective when connect with COM2
2# closing input port: effective when connect with COM2
Force open input port: effective when connect with COM2
Communication: RS485 interface, MODBUS protocol
Outline dimensions: 139mmx120mmx48mm
Hole dimensions: 130mmx111mm
Working conditions: temperature -25℃ to +70℃, relative humidity 20-93% RH
Storage conditions: temperature -25℃ to +70℃
Protection level: IP55 when waterproof rubber ring is mounted between controller and control panel
Insulation strength: AC2 2kv voltage is applied between AC high voltage terminal and low voltage terminal, the leakage current is no larger than 3MA in 1 minute

Package List:
1 x Genset Controller