NEW 3-Axis DSLR Handheld Brushless Gimbal Camera Mount Handle PTZ w/32bit Alexmos Controller Motor for DSLR

NEW 3-Axis DSLR Handheld Brushless Gimbal Camera Mount Handle PTZ w/32bit Alexmos Controller Motor for DSLR

Features:
- Center of gravity adjustable
- Material: metal tube clamp and carbon fiber material, light weight
- Axis: three axis
- Motor: BGM5208

Specifications:
- Handle: 20mm
- Camera install width: 19cm
- Carbon fiber tube diameter: 25mm
- Handle pitch: 42cm
- Height: 40cm

Motor Specifications:
- Model: BGM5208
- KV: 30
- Wire: 0.27mm
- Structure: 12N14P
- Shaft Dia.: 5.0mm
- Size: Dia.63*25mm
- Resistance: 15.2Ω
- Suit for DSLR  cameras gimbal aerial photography

Authorization 32Bit ARM AlexMos Brushless Gimbal Controller +  IMU:

Features:
- 32-bit MCU — ARM Cortex M4. Effectively calculates the complex tasks for 3-axis stabilization.
- Allows camera control with the RC or analog joystick.
- Use several switchable profiles for different modes of operation
- Supports variety of RC protocols: PWM, Sum-PPM, spektrum and s-bus.
- Battery voltage monitoring, compensating voltage drop in the PID-regulator.
- Low battery alarm (output to 5V active buzzer).
- Increased number of inputs for controlling signals + 3 additional reserved input/output AUX1-AUX3.
- Can supply up to 1A current for external devices on the 5V power line.
- Reverse-polarity protection, overheat and overcurrent protection
- Graphical user interface to manage the settings. Windows / OS X / Linux versions.
- Improved attitude estimation algorythms
- Optional second IMU, that will increase the short-term precision of the stabilization 10x-30x times and  will make stable work in any frame position.

Specification:
- Main board size: 50 x 50mm
- Distance between the mounting holes: 45 mm
- Power supply voltage: 8–25 V (3s-5s LiPo)
- Maximum motor current: 1.5 A
- 5V output current to power external devices: up to 1 A
- Firmware version: Official website upgradable to latest 2.4b8

For details on configuration and setup, please refer to the official website: Click here
Firmware download: Click here 
Starting from version 2.1, firmware upgrade is possible from GUI.

USB PC driver download: Click here

Note:
- No user manual ,need to study by yourself!
- The gimbal is spare parts,not assembled.

Package included:
- 1 x 3K High Quality Carbon Fiber Gimbal
- 3 x High Quality 5208 Motors ( Each Motor can afford 1.7KGS Torque )
- 1 x Genuine 32bit AlexMos Controller Board
- 2 x IMU Sensor Board
- Necessary cables
- 1x Aluminum Protective Cover Case