OSD Flight Controller BF Hardware F4V3-S/Standard Version For FPV 4-Axis Fixed-Wing Photography

OSD Flight Controller BF Hardware F4V3-S/Standard Version For FPV 4-Axis Fixed-Wing Photography

Version Introduction:
F4V3-S is an upgraded version of F4V3. Compared with F4V3, F4V3-S has a on-board filtering, and image transmission signal is purer and pictures are better.

The main difference between simple version and standard version is that the simple configuration does not contain any contact pins nor accessories, while there is no difference in performance.

Features:
- Open source F4 flight controller, using imported STM32F405 main chip, cache up to 128Mhz.
- With OSD, support for BF official OSD firmware, which can display more flight data.
- OSD version with barometer, support memory card black box to record flight data.
- VBAT interface supports 2-4S power battery access to the flight control. (Battery is not included)
- GPS and compass ports are reserved, which is more suitable for fixed-wing flights.
- Higher operating frequency, more flexible response than F3 flight control.
- The flight controller for BF firmware, INAV firmware and CF firmware programming.
- When used with BLS and 32-bit ESC, 8K mode can be turned on in seconds, making flights smoother.
- Rich functions, suitable for fixed-wing and four-axis FPV aircraft.

Specifications:
- PCB size: 35*35mm
- Installation hole spacing: 30.5*30.5mm

Package Included:
- 1 x Set of Flight Controller
 
Note: Battery is not included in the package.