4WD Aluminum Mobile Robot Platform Educational Car Chassis Vehicles for Competition

4WD Aluminum Mobile Robot Platform Educational Car Chassis Vehicles for Competition

Introduction:
- 4WD aluminum mobile robot platform. can hold many controllers, drivers, sensors and RFmodules etc, support plate with controller mounting holes, 2 dof pan and tilt holddown groove, collision switch mounting hole, an be added with sensors.light weight, high strength and no deformation characteristics. unique design and colour,cool feeling.elastic rubber tyres, with damping, wear-resisting, grip strong charastics.
- Top-quality rubber Wheel  120mm diameter. Roughness convex provides strong Traction
- All-metal body
- Direct-current decelerate Electrical machineryMetal couplingSwitch Controller

Specifications:
- Wheel diameter: 80mm
- Wheel width: 60mm
- Platform length: 235mm
- Platform width: 220mm
- Platform height: 120mm
- Platform Weight: 1180g
- Chassis from the ground distance: 24 mm
- The motor rated voltage: 6VDC
- The motor no-load speed: 77 r / min, 281 r / min, 640 r / min(If you have no request for it,i will send you  77 r/min)
- The motor rated speed: 77 rpm / min
- The motor gear box Length: 19mm
- The motor rated current: 0.37A
- The motor rated torque: 26.8mN.m
- The maximum motor torque: 55.3mN.m
 
Package list:
- 1 X  4WD upper support board
- 1 X  4WD lower support board
- 1 X  4WD front panel
- 1 X  4WD Back plate
- 1 X  Left fixed plate
- 1 X  Right fixed plate
- 1 X  Power switch interface board
- 1 X  Switching power switch
- 1 X  battery charging interface
- 1 X Heat-shrinkable tubing
- 5 X  Black Tie
- 3 X  Connecting cable (red)
- 2 X  Connecting cable (black)
- 4 X Motor-reducer 12V / 100R DC
- 4 X  Rubber wheels
- 4 X Metal coupling
- 8 X Motor cable connection
- 28X Screws M3 * 6
- 4 X  Nut
- 4 X  M3 * 6 Nylon speaker
- 1 X  Hex key